journal article·2023-02

Differences in the deterioration behaviors of fast-charged lithium-ion batteries at high and low temperatures

Yating Du, Sayoko Shironita, Eiji Hosono, Daisuke Asakura, Yoshitsugu Sone, Minoru Umeda

Publisher page

Abstract

Demand for stationary storage batteries, which store electricity generated by natural energy, such as solar energy, is increasing. These Li-ion batteries (LIBs) may be used outside their safe temperature ranges, depending on the usage environment, and they are required to charge as rapidly as possible when used frequently. Therefore, the cycle deterioration behaviors of LIBs at different operating temperatures at high rates of charge are studied here. Compared with the deterioration at high temperatures, the decrease in battery capacity at low temperatures is higher, and more severe deterioration is observed at temperatures that differ considerably from the safe temperature range. Based on differential capacity analysis, the peaks corresponding to the anode are significantly reduced at the potential of the initial charging stage after cycle deterioration at low temperatures. Therefore, the number of Li ions intercalated into/deintercalated from the graphite layer decreases. The activation energies of deterioration confirm that the mechanisms of battery deterioration differ at high and low temperatures, based on the negative and positive values obtained at low and high temperatures, respectively. Overall, deterioration at high temperatures affects the cathode, and that at low temperatures affects the anode.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Study of thermal deterioration of lithium-ion secondary cell using an accelerated rate calorimeter (ARC) and AC impedance method10.1016/j.jpowsour.2011.09.067 ↗
2. Degradation of lithium ion batteries employing graphite negatives and nickel–cobalt–manganese oxide + spinel manganese oxide positives: Part 1, aging mechanisms and life estimation10.1016/j.jpowsour.2014.07.030 ↗
3. Study on the reversible capacity loss of layered oxide cathode during low-temperature operation10.1016/j.jpowsour.2016.12.033 ↗
4. Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles10.1016/j.jpowsour.2015.03.178 ↗
5. Effect of the charge process on the performance of Li-ion cells during charge-discharge cycling at 0°C10.5796/electrochemistry.20-00027 ↗
6. Review―lithium plating detection methods in Li-ion batteries10.1149/1945-7111/abd3b8 ↗
7. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells10.1016/j.jpowsour.2018.05.073 ↗
8. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
9. Fast charging of lithium-ion batteries via electrode engineering10.1149/1945-7111/ab7fb9 ↗
10. Effects of fast charging at low temperature on a high energy Li-ion battery10.1149/1945-7111/abc4bc ↗
11. Li plating as unwanted side reaction in commercial Li-ion cells – a review10.1016/j.jpowsour.2018.02.063 ↗
12. Capacity fade characteristics of nickel-based lithium-ion secondary battery after calendar deterioration at 80 °C10.1016/j.jpowsour.2021.230005 ↗
13. Current collectors for positive electrodes of lithium-based batteries10.1149/1.2039587 ↗
14. Fabrication of a flexible current collector for lithium ion batteries by inkjet printing10.3390/batteries4030042 ↗
15. Electrochemical impedance study of LiCoO2 cathode reactions in a lithium ion cell incorporating a reference electrode10.1007/s10008-015-2741-y ↗
16. Kinetic characterization of single particles of LiCoO2 by AC impedance and potential step methods10.1149/1.1359197 ↗
17. Peak attribution of the differential capacity profile of a LiCoO2-based three-electrode Li-ion laminate cell
18. Influence of working temperature on the electrochemical characteristics of Al2O3-coated LiNi0.8 Co0.1Mn0.1O2 cathode materials for Li- ion batteries10.1016/j.jallcom.2020.156412 ↗
19. Quick testing of batteries in lithium-ion battery packs with impedance-measuring technology10.1016/j.jpowsour.2003.09.045 ↗
20. In situ analysis of high temperature characteristics of prismatic polymer lithium - ion batteries10.1007/s10800-004-2459-5 ↗
21. A nonlinear least squares fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
22. Effects of Mg-substitution in Li(Ni,Co,Al)O2 positive electrode materials on the crystal structure and battery performance10.1016/j.jpowsour.2007.06.035 ↗
23. Temperature dependent ageing mechanisms in lithium-ion batteries – a post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
24. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries10.1016/j.jpowsour.2018.09.069 ↗
25. Mn versus Al in layered oxide cathodes in lithium-ion batteries: a comprehensive evaluation on long-term cyclability
26. Performance of LiNiCoO2 materials for advanced lithium-ion batteries10.1016/j.jpowsour.2005.03.091 ↗
27. Review—SEI: past, present and future10.1149/2.1441707jes ↗
28. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes10.1149/1.1837858 ↗
29. A comparative study of synthetic graphite and Li electrodes in electrolyte solutions based on ethylene carbonate-dimethyl carbonate mixtures10.1149/1.1837300 ↗
30. Investigation of layered LiNi1/3Co1/3Mn1/3O2 cathode of lithium ion battery by electrochemical impedance spectroscopy10.1016/j.jelechem.2012.09.027 ↗
31. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
32. Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries10.1016/j.jpowsour.2013.09.143 ↗
33. Effect of Li plating during formation of lithium ion batteries on their cycling performance and thermal safety10.1016/j.jpowsour.2020.229306 ↗
34. Electrode-electrolyte interface in Li-ion batteries: current understanding and new insights10.1021/acs.jpclett.5b01727 ↗
35. Understanding undesirable anode lithium plating issues in lithium-ion batteries10.1039/C6RA19482F ↗
36. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions10.1016/S0167-2738(02)00080-2 ↗
37. Anode potential controlled charging prevents lithium plating10.1039/D0TA04467A ↗
38. Impact of temperature and discharge rate on the aging of a LiCoO2/LiNi0.8Co0.15Al0.05O2 lithium-ion pouch cell10.1149/2.0401707jes ↗