In-situ reconstruction of spinel interface on Li-rich layered cathode with improved electrochemical performances
Source abstract
Abstract
Abstract The produced inactive interface during the cycle and poor rate performance are the inevitable obstacles for the practicability of lithium-rich layered cathode. Here, we report that in-situ surface pretreatment technique with hydrazine hydrate can reconstruct epitaxial spinel possessing the rapid lithium ions diffusion path, which primarily includes the leaching of Li+/Ni2+ and redistribution of the metal ions. We confirm the generation of epitaxial spinel heterostructure on the layered matrix by kinds of characterization methods such as transmission electron microscopy and Raman spectroscopy. As a result, the epitaxial spinel substantially promotes the lithium ion diffusion coefficient from 1.98 × 10−11 cm2 s−1 to 3.76 × 10−11 cm2 s−1. Even under a discharge current 5 C, the reversible capacity still reaches up to 171.1 mAh g−1. After 200 cycles at 1 C, the modified cathode delivers a capacity retention of 84.2% with the discharge capacity of 197.8 mAh g−1. The presence of the epitaxial spinel layer exerts a positive effect on the stability of the cathode structure and suppression of side reactions at the interface via exploring the morphology and composition of the cycled cathodes. The in-situ surface reconstruction technology to generate spinel is appealing for promise prospect application of lithium-rich layered cathodes in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Electrochemical energy storage in a sustainable modern society10.1039/C3EE42613K ↗
2. Al2O3-coated Li1.2Mn0.54Ni0.13Co0.13O2 nanotubes as cathode materials for high-performance lithium-ion batteries10.1039/C8RA09428D ↗
3. Crystalline grain interior configuration affects lithium migration kinetics in Li-rich layered oxide10.1021/acs.nanolett.5b03933 ↗
4. Well-dispersed and porous FeP@C nanoplates with stable and ultrafast lithium storage performance through conversion reaction mechanism10.1039/C6TA04521A ↗
5. Enhanced electrochemical performances of layered-spinel heterostructured lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode materials10.1016/j.cej.2019.03.247 ↗
6. Fast sodium storage in TiO2@CNT@C nanorods for high-performance Na-ion capacitors10.1002/aenm.201701222 ↗
7. Self-supported Zn3P2 nanowires-assembly bundles grafted on Ti foil as an advanced integrated electrodes for lithium/sodium ion batteries with high performances10.1016/j.jallcom.2017.07.016 ↗
8. Nanomaterials for lithium-ion rechargeable batteries10.1166/jnn.2006.103 ↗
9. Hollow 0.3Li2MnO3∙0.7LiNi0.5Mn0.5O2 microspheres as a high-performance cathode material for lithium-ion batteries10.1039/c2cp44394e ↗
10. Synthesis of three-dimensional nanoporous Li-rich layered cathode oxides for high volumetric and power energy density lithium-ion batteries10.1021/acsami.6b14169 ↗
11. Layered-spinel capped nanotube assembled 3D Li-rich hierarchitectures for high performance Li-ion battery cathodes10.1039/C6TA05676H ↗
12. The Li-rich layered/spinel heterostructured special morphology cathode material with high rate capability for Li-ion batteries10.1021/acssuschemeng.7b02906 ↗
13. Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure10.1016/j.jpowsour.2015.05.058 ↗
14. Performance improvement of Li-rich layer-structured Li1.2Mn0.54Ni0.13Co0.13O2 by integration with spinel LiNi0.5Mn1.5O410.1039/C4CP04087B ↗
15. Layered-spinel capped nanotubes assembled 3D Li-rich hierarchitectures for high performance Li-ion battery cathode10.1039/C6TA05676H ↗
16. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
17. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
18. A Li-rich Layered@Spinel@Carbon heterostructured cathode material for high capacity and high rate lithium-ion batteries fabricated via an in situ synchronous carbonization-reduction method10.1039/C4TA05848H ↗
19. High rate capability caused by surface cubic spinels in Li-rich layer-structured cathodes for Li-ion batteries10.1038/srep03094 ↗
20. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating10.1002/adma.201801751 ↗
21. The effects of persulfate treatment on the electrochemical properties of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material10.1016/j.jpowsour.2012.06.084 ↗
22. A novel strategy to significantly enhance the initial voltage and suppress voltage fading of a Li- and Mn-rich layered oxide cathode material for lithium-ion batteries10.1039/C7TA10887G ↗
23. Enhancing the kinetics of Li-rich cathode materials through the pinning effects of gradient surface Na+ doping10.1002/aenm.201501914 ↗
24. Effect of synthetic routes on the rate performance of Li-rich layered Li1.2Mn0.56Ni0.12Co0.12O210.1039/C4TA06552B ↗
25. Spherical layered Li-rich cathode material: unraveling the role of oxygen vacancies on improving lithium ion conductivity10.1016/j.jpowsour.2020.228171 ↗
26. Cation mixing in LiNi0.8Co0.15Al0.05O2 positive electrode material studied using high angular resolution electron channeling X-ray spectroscopy10.1016/j.jpowsour.2018.08.100 ↗
27. Effects of cation mixing on the electrochemical lithium intercalation reaction into porous Li1-δNi1-yCoyO2 electrodes10.1016/0167-2738(96)00269-X ↗
28. An appropriate amount of new spinel phase induced by control synthesis for the improvement of electrochemical performance of Li-rich layered oxide cathode material10.1016/j.electacta.2019.135240 ↗
29. Spherical lithium-rich layered Li1.13[Mn0.534Ni0.233Co0.233]0.87O2 with concentration-gradient outer layer as high-performance cathodes for lithium ion batteries10.1016/j.jpowsour.2013.01.021 ↗
30. Suppressed capacity/voltage fading of high-capacity lithium-rich layered materials via the design of heterogeneous distribution in the composition10.1039/c3ta14513a ↗
31. Synchronous tailoring surface structure and chemical composition of li-rich-layered oxide for high-energy lithium-ion batteries10.1002/adfm.201803392 ↗
32. Multishelled Ni-rich Li(NixCoyMnz)O2 hollow fibers with low cation mixing as high-performance cathode materials for Li-ion batteries10.1002/advs.201600262 ↗
33. Structure and interface design enable stable li-rich cathode10.1021/jacs.0c02302 ↗
34. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
35. Surface structural conversion and electrochemical enhancement by heat treatment of chemical pre-delithiation processed lithium-rich layered cathode material10.1016/j.jpowsour.2014.06.106 ↗
36. Phosphoric acid and thermal treatments reveal the peculiar role of surface oxygen anions in lithium and manganese-rich layered oxides10.1039/D0TA07371G ↗
37. An ion-exchange promoted phase transition in a Li-excess layered cathode material for high-performance lithium ion batteries10.1002/aenm.201401937 ↗
38. Suppressing surface lattice oxygen release of li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating10.1002/adma.201801751 ↗
39. Suppression of structural phase transformation of Li-rich Mn-based layered cathode materials with Na ion substitution strategy10.1016/j.electacta.2020.136402 ↗
40. Ultrathin spinel membrane-encapsulated layered lithium-rich cathode material for advanced Li-ion batteries10.1021/nl501164y ↗
41. Revealing the fake initial Coulombic efficiency of spinel/layered Li-rich cathode materials10.1016/j.electacta.2020.136279 ↗
42. Lithium deficiencies engineering in Li-rich layered oxide Li1.098Mn0.533Ni0.113Co0.138O2 for high-stability cathode10.1021/jacs.9b04974 ↗
43. K+-doped Li1.2Mn0.54Co0.13Ni0.13O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries10.1021/am5017649 ↗
44. Improving the electrochemical performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 through a cooperative doping of Na+ and PO43− with Na3PO410.1016/j.jpowsour.2017.11.042 ↗
45. Nickel-modified and zirconium-modified Li2MnO3 and applications in lithium-ion battery10.1016/S1452-3981(23)14690-6 ↗
46. Unveiling the intrinsic reaction between silicon-graphite composite anode and ionic liquid electrolyte in lithium-ion battery10.1016/j.jpowsour.2020.228481 ↗
47. Synergistic Na+ and F− co-doping modification strategy to improve the electrochemical performance of Li-rich Li1.20Mn0.54Ni0.13Co0.13O2 cathode10.1016/j.ceramint.2020.06.263 ↗
48. The positive roles of integrated layered-spinel structures combined with nanocoating in low-cost Li-rich cathode Li[Li0.2Fe0.1Ni0.15Mn0.55]O2 for lithium-ion batteries10.1021/am506934j ↗
49. Stabilizing the cationic/anionic redox of Li-rich layered cathodes by tuning upper cut-off voltage for high energy-density lithium-ion batteries10.1039/D0TA05429A ↗
50. Effect of Li3PO4 coating of layered lithium-rich oxide on electrochemical performance10.1016/j.jpowsour.2016.11.020 ↗
51. Double-shell Li-rich layered oxide hollow microspheres with sandwich-like carbon@spinel@layered@spinel@carbon shells as high-rate lithium ion battery cathode10.1016/j.nanoen.2019.02.040 ↗
52. Surface reconstruction in Li-rich layered oxides of Li-ion batteries10.1021/acs.chemmater.7b00120 ↗
53. The decay mechanism related to structural and morphological evolution in lithium-rich cathode materials for lithium-ion batteries10.1002/cssc.202000430 ↗
54. Surface/interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
55. Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries10.1038/s41565-018-0183-2 ↗
56. Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode10.1016/j.jpowsour.2016.08.023 ↗
57. Surface chemistry of metal oxide coated lithium manganese nickel oxide thin film cathodes studied by XPS10.1016/j.electacta.2012.11.120 ↗
58. Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li1.2Ni0.2Mn0.6O2 cathode material for lithium ion batteries10.1021/nl5038598 ↗
59. The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries10.1039/C5EE03048J ↗
60. Synthesis and characterization of high-energy, high-power spinel-layered composite cathode materials for lithium-ion batteries10.1002/aenm.201401156 ↗
61. Probing and suppressing voltage fade of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion battery10.1016/j.electacta.2019.06.119 ↗
62. Improving electrochemical performances of Li-rich layered Mn-based oxide cathodes through K2Cr2O7 solution treatment10.1021/acsaem.8b02178 ↗