journal article·2021-04

An integrated solvent-free modification and composite process of Li6.4La3Zr1.4Ta0.6O12/Poly(ethylene oxide) solid electrolytes: Enhanced compatibility and cycle performance

Rong-Ao Tong, Linhui Chen, Gang Shao, Hailong Wang, Chang-An Wang

Publisher page

Abstract

Abstract With the increasing demand for higher energy density Lithium-ion batteries, the battery safety issue has gained growing attention. Solid-state electrolytes (SSEs) are considered a promising solution to the volatilization and inflammable problems of the traditional liquid electrolytes. In this work, we propose a novel solvent-free modification process using stearic acid as a modifying agent for LLZTO/PEO hybrid electrolytes. Compared to the conventional solvent-casting process, the new one integrates surface modification and composite in a successive solvent-free step, so it can greatly improve the process efficiency and meet the requirement of green chemistry. Fourier Transform Infrared spectrometry (FTIR), X-Ray Diffraction (XRD) and Transmission Electron Microscope (TEM) observation confirm the structure of the uniform coating layer. The solvent-free modification and composite process are proved to significantly inhibit the agglomeration of LLZTO particles and the side reactions on particle surfaces in the polymer matrix by using Scanning Electron Microscope (SEM) and Thermal Gravimetric-Differential Thermal Analysis (TG-DTA) characterization. Thus, the prepared electrolyte has the ionic conductivity of up to 8.3 × 10−4 S cm−1 at 70 °C. It has better electrochemical stability as well, which can achieve about 900 cycles in Li symmetric cells with a current density of 0.1 mA cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
2. Recent advances in energy chemistry between solid-state electrolyte and safe lithium-metal anodes
3. Practical challenges and future perspectives of all-solid-state lithium-metal batteries
4. Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte10.1016/j.elecom.2015.05.001 ↗
5. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
6. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
7. New horizons for inorganic solid state ion conductors10.1039/C8EE01053F ↗
8. auf der Gunne JS, Dehnen S, Roling B. Li10SnP2S12: an Affordable Lithium Superionic Conductor10.1021/ja407393y ↗
9. In situ SEM study of a lithium deposition and dissolution mechanism in a bulk-type solid-state cell with a Li2S-P2S5 solid electrolyte10.1039/c3cp51059j ↗
10. Garnet-type solid-state fast Li ion conductors for Li batteries: critical review10.1039/c4cs00020j ↗
11. Lithium lanthanum titanates: a review10.1021/cm0300516 ↗
12. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
13. Optimizing Li+ conductivity in a garnet framework10.1039/c2jm31413d ↗
14. Garnet-type solid-state electrolytes: materials, interfaces, and batteries10.1021/acs.chemrev.9b00427 ↗
15. Phase structure and helical jump motion of poly(ethylene oxide)/LiCF3SO3 crystalline complex: a high-resolution solid-state C-13 NMR approach10.1021/ma400673y ↗
16. Nanocomposite polymer electrolytes for lithium batteries10.1038/28818 ↗
17. Structural investigation on PEO-based polymer electrolytes dispersed with Al2O3 nanoparticles10.1007/s11581-007-0131-x ↗
18. Lithium ion conducting poly(ethylene oxide)-based solid electrolytes containing active or passive ceramic nanoparticles10.1021/acs.jpcc.6b11136 ↗
19. PEO/garnet composite electrolytes for solid-state lithium batteries: from "ceramic-in-polymer" to "polymer-in-ceramic10.1016/j.nanoen.2017.12.037 ↗
20. Flexible ion-conducting composite membranes for lithium batteries10.1002/aenm.201500265 ↗
21. Enhanced ionic conductivity of polymer electrolytes containing nanocomposite SiO2 particles10.1103/PhysRevLett.91.266104 ↗
22. High-performance Li6.4La3Zr1.4Ta0.6O12/Poly(ethylene oxide)/Succinonitrile composite electrolyte for solid-state lithium batteries10.1016/j.jpowsour.2018.07.005 ↗
23. Composite polymer electrolyte doped with mesoporous silica SBA-15 for lithium polymer battery10.1016/j.ssi.2005.02.016 ↗
24. Electrochemical performance of a solvent-free hybrid ceramic-polymer electrolyte based on Li7La3Zr2O12 in P(EO)15LiTFSI10.1016/j.jpowsour.2017.04.014 ↗
25. Blending Poly(ethylene oxide) and Li6.4La3Zr1.4Ta0.6O12 by Haake Rheomixer without any solvent: a low-cost manufacture method for mass production of composite polymer electrolyte10.1016/j.jpowsour.2020.227797 ↗
26. Excess lithium salt functions more than compensating for lithium loss when synthesizing Li6.5La3Ta0.5Zr1.5O12 in alumina crucible10.1016/j.jpowsour.2014.02.065 ↗
27. Impact of air exposure and surface chemistry on Li–Li7La3Zr2O12 interfacial resistance10.1039/C7TA03162A ↗
28. Ionic conduction in composite polymer electrolytes: case of PEO:Ga-LLZO composites10.1021/acsami.8b17279 ↗
29. Lithium ion pathway within Li7La3Zr2O12-polyethylene oxide composite electrolytes10.1002/anie.201607539 ↗
30. Comparison of solvent-cast and hot-pressed P(EO)[sub 20]LiN(SO2CF2CF3)2 polymer electrolytes containing nanosized SiO210.1149/1.1846713 ↗
31. A dopamine modified Li6.4La3Zr1.4Ta0.6O12/PEO solid-state electrolyte: enhanced thermal and electrochemical properties10.1039/C9TA03395E ↗
32. A review of lithium and non-lithium based solid state batteries10.1016/j.jpowsour.2015.02.054 ↗