Switchable resistance conducting-polymer layer for Li-ion battery overcharge protection
Source abstract
Abstract
Abstract Overcharge of Li-ion cells is one of the causes of severe safety problems. Despite many efforts to prevent development of adverse processes at overcharge conditions by using Battery Management Systems, chemical protection remains the most fail-safe solution. In the present work we describe novel approach to overcharge protection of Li-ion cells, which is provided by use of electrically conductive polymer that change electrical conductivity from conductive to insulating stage. The layer of such polymer, deposited between the LiFePO4 -based cathode material and current collector, increase the electrode resistance in more than 20 times when the cell voltage exceeds 4.2 V, acting as a chemical circuit breaker. At 5 V overcharge it allows reversible charge-discharge of the cell without developing of adverse process, while at 6 V overcharge it terminates the cell operation before electrolyte decomposition starts, reducing amount of evolved gases in 4 times compared to non-protected cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Review on health management system for lithium-ion batteries of electric vehicles10.3390/electronics7050072 ↗
2. A review on the thermal hazards of the lithium-ion battery and the corresponding countermeasures10.3390/app9122483 ↗
3. A review of hazards associated with primary lithium and lithium-ion batteries10.1016/j.psep.2011.06.022 ↗
4. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
5. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
6. A review of state of health and remaining useful life estimation methods for lithium-ion battery in electric vehicles: challenges and recommendations10.1016/j.jclepro.2018.09.065 ↗
7. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
8. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
9. Butyrolactone derivatives as electrolyte additives for lithium-ion batteries with graphite anodes10.1016/S0378-7753(03)00271-4 ↗
10. Inorganic electrolyte additives to suppress the degradation of graphite anodes by dissolved Mn(II) for lithium-ion batteries10.1016/S0378-7753(03)00224-6 ↗
11. Fluoroethylene carbonate electrolyte and its use in lithium ion batteries with graphite anodes10.1016/S0378-7753(98)00201-8 ↗
12. N-butylferrocene for overcharge protection of secondary lithium batteries10.1149/1.2086817 ↗
13. Status of the development of rechargeable lithium cells
14. Triphenylamines as a class of redox shuttle molecules for the overcharge protection of lithium-ion cells10.1149/1.2816229 ↗
15. High-potential redox shuttle for use in lithium-ion batteries10.1149/1.3077578 ↗
16. Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries10.1007/s10800-004-0771-8 ↗
17. Influence of electrolyte additives on safety and cycle life of rechargeable lithium cells10.1023/A:1024039302020 ↗
18. Huanyu · 1996 · 28
19. An electrolyte additive for thermal shutdown protection of Li-ion batteries10.1016/j.elecom.2012.09.038 ↗
20. Thermoresponsive microcapsules for autonomic lithium-ion battery shutdown
21. Xylene as a new polymerizable additive for overcharge protection of lithium ion batteries10.1002/cjoc.200990245 ↗
22. Overcharge protection effect of cyclohexylbenzene and new overcharge protection agent for lithium ion batteries10.1149/04529.0067ecst ↗
23. Co-use of cyclohexyl benzene and biphenyl for overcharge protection of lithium-ion batteries10.1149/1.2193072 ↗
24. Dimethoxydiphenylsilane (DDS) as overcharge protection additive for lithium-ion batteries10.1016/j.jpowsour.2013.03.139 ↗
25. Electrochemistry of conducting polymers—persistent models and new concepts10.1021/cr900226k ↗
26. Modeling the behavior of electroactive polymers for overcharge protection of lithium batteries10.1149/1.1649232 ↗
27. Overcharge protection for high voltage lithium cells using two electroactive polymers10.1149/1.2135428 ↗
28. A poly(3-decyl thiophene)-modified separator with self-actuating overcharge protection mechanism for LiFePO4-based lithium ion battery10.1016/j.jpowsour.2010.09.111 ↗
29. Polytriphenylamine used as an electroactive separator material for overcharge protection of rechargeable lithium battery10.1016/j.jpowsour.2006.03.040 ↗
30. Stable and high-rate overcharge protection for rechargeable lithium batteries10.1039/c3cp50992c ↗
31. Thomas-Alyea · 2018 · 1
32. Foster · 1989 · 5
33. The effect of electrode potential on the conductivity of polymer complexes of nickel with salen ligands10.1134/S1023193519030030 ↗
34. Nickel-salen type polymers as cathode materials for rechargeable lithium batteries
35. Aryl‐aryl coupling of salicylic aldehydes through oxidative CH‐activation in nickel salen derivatives10.1002/slct.201902385 ↗
36. A comparison of formation methods for graphite//LiFePO 4 cells10.1002/batt.201800109 ↗
37. Effects of 2,4-difluorobiphenyl as an electrolyte additive to enhance the overcharge protection of cylindrical LiCoO2/graphite batteries10.20964/2018.06.74 ↗
38. Polymeric nickel complexes with salen-type ligands for modification of supercapacitor electrodes: impedance studies of charge transfer and storage properties//Electrochim
39. Failure mechanism of Li-ion battery at overcharge conditions10.1007/s10008-007-0449-3 ↗
40. Failure investigation of LiFePO4 cells under overcharge conditions10.1149/2.024206jes ↗
41. Electrochemical and spectroscopic investigations of the overcharge behavior of StabiLife electrolyte salts in lithium-ion batteries10.1149/1.3523330 ↗
42. The spin-polarized electronic structure of LiFePO4 and FePO4 evidenced by in-lab XPS10.1021/jp106631v ↗
43. A novel and accurate analytical method based on X-ray photoelectron spectroscopy for the quantitative detection of the lithium content in LiFePO410.1039/C4AY00980K ↗
44. XPS-surface analysis of SEI layers on Li-ion cathodes: Part II. SEI-composition and formation inside composite electrodes10.1149/2.0881803jes ↗