Compressive creep deformation of lithium foil at varied cell conditions
Source abstract
Abstract
Abstract Lithium metal rechargeable batteries have great potential for higher energy density storage systems. Current configurations of all solid-state and anode-free cells depend on significant internal mechanical pressure (typically 0.5–1 MPa) to reduce interfacial resistance and suppress lithium dendrite formation. Mechanical stack pressure can increase over time and with use as cell components degrade. Lithium is soft at room temperature and may not be physically strong enough to support the required stack pressures in standard lithium-ion operating conditions. Compressive creep deformation of low aspect ratio lithium metal foils was measured in hermetically sealed, rigid but flexible cells at temperatures between 30–60°C and applied pressures between 0.6–3.6 MPa. Creep rates were typically on the order of a few μ m h−1, depending on pressure, temperature, lithium thickness, and grain size. While difficult to notice during fast cycling these creep rates could have a pronounced effect during storage or practical use. Results suggest that pure lithium may not be strong enough for use in high energy density all solid-state devices, and that alternatives (e.g.lithium-rich alloys) should be considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
2. The lithium-ion battery: State of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
3. The future cost of electrical energy storage based on experience rates10.1038/nenergy.2017.110 ↗
4. Attainable gravimetric and volumetric energy density of Li-S and Li ion battery cells with solid separator-protected Li metal anodes10.1021/acs.jpclett.5b01814 ↗
5. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
6. Lithium metal anodes: Toward an improved understanding of coupled morphological, electrochemical, and mechanical behavior10.1021/acsenergylett.6b00650 ↗
7. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
8. Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells10.1038/s41563-019-0438-9 ↗
9. More pressure needed10.1038/s41560-019-0478-z ↗
10. Dendrites and pits: Untangling the complex behavior of lithium metal anodes through operando video microscopy10.1021/acscentsci.6b00260 ↗
11. Stable Li metal anode enabled by space confinement and uniform curvature through lithiophilic nanotube arrays10.1002/aenm.201902819 ↗
12. The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth10.1038/ncomms8436 ↗
13. Stabilization of lithium metal anodes by hybrid artificial solid electrolyte interphase10.1021/acs.chemmater.7b01496 ↗
14. Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte10.1038/s41560-019-0428-9 ↗
15. Effects of physical constraints on Li cyclability10.1016/0378-7753(91)80077-B ↗
16. Influence of electrolyte on lithium cycling efficiency with pressurized electrode stack10.1149/1.2054778 ↗
17. The impact of elastic deformation on deposition kinetics at lithium polymer interfaces10.1149/1.1850854 ↗
18. Mechanism of lithium metal penetration through inorganic solid electrolytes10.1002/aenm.201701003 ↗
19. Characterizing the Li-Li7La3Zr2O12 interface stability and kinetics as a function of temperature and current density10.1016/j.jpowsour.2015.10.053 ↗
20. Lithium dendrite growth mechanisms in polymer electrolytes and prevention strategies10.1039/C7CP03304D ↗
21. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
22. Stack pressure considerations for room-temperature all-solid-state lithium metal batteries10.1002/aenm.201903253 ↗
23. Pressure-driven interface evolution in solid-state lithium metal batteries
24. Toward a fundamental understanding of the lithium metal anode in solid-state batteries - an electrochemo-mechanical study on the garnet-type solid electrolyte Li6.25Al0.25La3Zr2O1210.1021/acsami.9b02537 ↗
25. Characterizing the Li-solid-electrolyte interface dynamics as a function of stack pressure and current density10.1016/j.joule.2019.06.017 ↗
26. Rethinking how external pressure can suppress dendrites in lithium metal batteries10.1149/2.0701914jes ↗
27. Deformation mechanism maps for alkali metals10.1016/0036-9748(84)90494-0 ↗
28. Plastic deformation of the alkali metals sodium and potassium
29. Plastic workability of pure lithium10.2464/jilm.50.660 ↗
30. A materials perspective on Li-ion batteries at extreme temperatures10.1038/nenergy.2017.108 ↗
31. Lithium mechanics: Roles of strain rate and temperature and implications for lithium metal batteries10.1149/2.0221902jes ↗
32. Elastic, plastic, and creep mechanical properties of lithium metal10.1007/s10853-018-2971-3 ↗
33. Temperature dependent flux balance of the Li/Li7La3Zr2O12 interface10.1016/j.electacta.2018.11.034 ↗
34. Schultz · 2002
35. Mechanical properties of metallic lithium: from nano to bulk scales10.1016/j.actamat.2019.12.036 ↗
36. Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes10.1073/pnas.1615733114 ↗
37. A nanoindentation study of the viscoplastic behavior of pure lithium10.1016/j.scriptamat.2016.12.006 ↗
38. Study of the influence of mechanical pressure on the performance and aging of lithium-ion battery cells10.1016/j.jpowsour.2019.227148 ↗
39. Exploring the impact of mechanical pressure on the performance of anode-free lithium metal cells10.1149/2.0091908jes ↗
40. Correlating the interface resistance and surface adhesion of the Li metal-solid electrolyte interface10.1016/j.jpowsour.2017.11.078 ↗
41. Diffusion limitation of lithium metal and Li–Mg alloy anodes on LLZO type solid electrolytes as a function of temperature and pressure10.1002/aenm.201902568 ↗
42. Li material testing-fermilab antiproton source lithium collection lens
43. Conflat two and three electrode electrochemical cells10.1149/2.0721414jes ↗
44. Improved conflat cell for repeatable electrochemical testing to 400∘C10.1149/2.0201902jes ↗
45. Electrochemical formation of four Al-Li phases (β-AlLi, Al2Li3, AlLi2−x, Al4Li9) at intermediate temperatures10.1149/2.0061916jes ↗
46. He · 2018
47. Visualization of 3D diffraction: MAX3D update10.1107/S0108767318096010 ↗
48. Texture analysis with MTEX–free and open source software toolbox
49. Strong texturing of lithium metal in batteries10.1073/pnas.1708224114 ↗
50. Electron backscatter diffraction applied to lithium sheets prepared by broad ion beam milling10.1002/jemt.22441 ↗
51. Texture of metals
52. The Al-Li (Aluminum-Lithum) system10.1007/BF02892377 ↗