journal article·2020-11

A novel polyurethane-LiF artificial interface protective membrane as a promising solution towards high-performance lithium metal batteries

Yan Liu, Runming Tao, Shengrui Chen, Kai Wu, Zhaofeng Zhong, Ji Tu, Pingmei Guo, Honghao Liu, Shun Tang, Jiyuan Liang, Yuan-Cheng Cao

Publisher page

Abstract

Abstract To construct highly stable Lithium (Li) metal batteries (LMBs), a polyurethane-LiF based artificial protective membrane (APM) is evenly coated onto LM anodes by a facile solution casting method. Owning to the good ionic conductivity and mechanical properties, APM acts as a physical protective isolation layer between electrolytes and LM to alleviate electrolyte decomposition and suppress Li dendrites. By applying the APM modification, the electrochemical performance of LM is dramatically improved. The Li | APM-Cu half-cell stably circulates 120 cycles with a high Coulombic efficiency of above 90% at a current density of 1 mA cm−2 and an area capacity of 1 mAh cm−2. The APM-Li based symmetric cell presents an ultralong life span of over 1500 h at an area capacity of 1 mAh cm−2and a current density of 0.5 mA cm−2. In full-cell tests, the APM-Li | LiFePO4 configuration maintains a high specific capacity of 120.4 mAh g−1 after 600 cycles with a superior capacity retention of 97.3% at 2C. Additionally, the extraordinary cyclability of APM-Li | Li4Ti5O12 full-cell demonstrates the effectiveness and versatility of APM. The scanning electron microscopy studies confirm the APM's suppression effects of Li dendrites. Therefore, this work provides a promising and affordable APM modification strategy to redeem highly stable LMBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
2. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
3. Recent advances in energy chemistry between solid-state electrolyte and safe lithium-metal anodes
4. Electronic and ionic channels in working interfaces of lithium metal anodes10.1021/acsenergylett.8b00526 ↗
5. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
6. Controlling dendrite growth in solid-state electrolytes10.1021/acsenergylett.9b02660 ↗
7. Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode10.1016/j.ensm.2018.06.022 ↗
8. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
9. Plating/stripping behavior of actual lithium metal anode10.1002/aenm.201902254 ↗
10. Composite protection layers for dendrite-suppressing non-granular micro-patterned lithium metal anodes10.1016/j.electacta.2018.05.102 ↗
11. Three dimensional porous frameworks for lithium dendrite suppression10.1016/j.jechem.2019.09.031 ↗
12. Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes10.1039/C7TA00371D ↗
13. Toward safer solid-state lithium metal batteries: a review10.1039/D0NA00174K ↗
14. Engineering of lithium-metal anodes towards a safe and stable battery10.1016/j.ensm.2018.02.014 ↗
15. Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries
16. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
17. Additive-assisted novel dual-salt electrolyte addresses wide temperature operation of lithium-metal batteries
18. Customizing a Li–metal battery that survives practical operating conditions for electric vehicle applications10.1039/C9EE00716D ↗
19. Constructing a liquid-metal based self-healing artificial solid electrolyte interface layer for Li metal anode protection in lithium metal battery10.1016/j.matlet.2019.127194 ↗
20. Artificial interphases for highly stable lithium metal anode10.1016/j.matt.2019.05.016 ↗
21. Mesoporous silica reinforced hybrid polymer artificial layer for high-energy and long-cycling lithium metal batteries10.1021/acsenergylett.0c00804 ↗
22. In situ constructing lithiophilic NiFx nanosheets on Ni foam current collector for stable lithium metal anode via a succinct fluorination strategy10.1016/j.cej.2020.125122 ↗
23. Lithiophilic V2O5 nanobelt arrays decorated 3D framework hosts for highly stable composite lithium metal anodes10.1016/j.cej.2019.123313 ↗
24. Uniform high ionic conducting lithium sulfide protection layer for stable lithium metal anode10.1002/aenm.201900858 ↗
25. A mixed lithium-ion conductive Li2S/Li2Se protection layer for stable lithium metal anode
26. Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode10.1016/j.ensm.2018.06.022 ↗
27. Li metal coated with amorphous Li3PO4 via magnetron sputtering for stable and long-cycle life lithium metal batteries10.1016/j.jpowsour.2016.11.097 ↗
28. Long lifespan lithium metal anodes enabled by Al2O3 sputter coating10.1016/j.ensm.2017.08.001 ↗
29. Protective coatings for lithium metal anodes: recent progress and future perspectives10.1016/j.jpowsour.2019.227632 ↗
30. Artificial soft-rigid protective layer for dendrite-free lithium metal anode
31. The role of lithium salts in the conductivity and phase morphology of a thermoplastic polyurethane10.1021/ma00116a030 ↗
32. Solid polymer electrolyte based on thermoplastic polyurethane and its application in all-solid-state lithium ion batteries10.1016/j.ssi.2017.06.013 ↗
33. Polyurethane elastomer‐LiClO4 complexes as a polymeric solid electrolyte10.1002/macp.1992.021931203 ↗
34. Flexible and free-standing LiFePO4/TPU/SP cathode membrane prepared via phase separation process for lithium ion batteries10.1016/j.memsci.2017.06.083 ↗
35. Composite polymer electrolytes based on electrospun thermoplastic polyurethane membrane and polyethylene oxide for all-solid-state lithium batteries10.1002/pi.5734 ↗
36. Effect of the soft and hard segment composition on the properties of waterborne polyurethane-based solid polymer electrolyte for lithium ion batteries10.1007/s10008-017-3855-1 ↗
37. A promising TPU/PEO blend polymer electrolyte for all-solid-state lithium ion batteries10.1016/j.electacta.2017.10.037 ↗
38. A simple composite protective layer coating that enhances the cycling stability of lithium metal batteries10.1016/j.jpowsour.2015.03.004 ↗
39. Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries10.1021/ja502133j ↗
40. Sustainable lignin‐derived cross‐linked graft polymers as electrolyte and binder materials for lithium metal battery10.1002/cssc.201903466 ↗
41. Hybrid electrolytes with controlled network structures for lithium metal batteries10.1002/adma.201502059 ↗
42. Resolution of the modulus versus adhesion dilemma in solid polymer electrolytes for rechargeable lithium metal batteries10.1149/2.030203jes ↗
43. In-situ catalytic growth carbon nanotubes from metal organic frameworks for high performance lithium-sulfur batteries10.1016/j.mtener.2018.03.007 ↗
44. Phospho‐olivines as positive‐electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
45. Enhancing the performances of Li-ion batteries by carbon-coating: present and future10.1039/C1CC14764A ↗
46. Ionic liquid-directed nanoporous TiNb2O7 anodes with superior performance for fast-rechargeable lithium-ion batteries10.1002/smll.202001884 ↗