journal article·2020-11

Chronoamperometry and linear sweep voltammetry reveals the adverse impact of high carbonate buffer concentrations on anode performance in microbial fuel cells

Ruggero Rossi, Deepak Pant, Bruce E. Logan

Publisher page

Abstract

Abstract Anode performance in microbial fuel cell (MFC) is usually examined by monitoring anode potentials in whole-cell polarization tests. However, this method does not fully test anode capabilities at higher current densities. To determine maximum anode current densities over a range of carbonate buffer (CB) concentrations we examined electrode performance using chronoamperometry, linear sweep voltammetry (LSV), and electrode potentials during polarization tests. Maximum anode current densities using chronoamperometry at +200 mV reached 42 ± 1 A m−2 in 200 mM CB, with lower current densities using 300, 400 mM, or 50 mM CB, consistent with anode LSV data. However, upper current densities were limited to
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Electroactive microorganisms in bioelectrochemical systems10.1038/s41579-019-0173-x ↗
2. Exoelectrogenic bacteria that power microbial fuel cells10.1038/nrmicro2113 ↗
3. The ins and outs of microorganism-electrode electron transfer reactions10.1038/s41570-017-0024 ↗
4. Proton transport inside the biofilm limits electrical current generation by anode-respiring bacteria10.1002/bit.21821 ↗
5. Critical transport rates that limit the performance of microbial electrochemistry technologies10.1016/j.biortech.2016.04.136 ↗
6. Importance of OH− transport from cathodes in microbial fuel cells10.1002/cssc.201100777 ↗
7. Quantifying the factors limiting performance and rates in microbial fuel cells using the electrode potential slope analysis combined with electrical impedance spectroscopy10.1016/j.electacta.2020.136330 ↗
8. Buffer pKa and transport govern the concentration overpotential in electrochemical oxygen reduction at neutral pH10.1002/celc.201402058 ↗
9. Effect of buffer charge on performance of air-cathodes used in microbial fuel cells10.1016/j.electacta.2016.02.095 ↗
10. Sustainable power generation in microbial fuel cells using bicarbonate buffer and proton transfer mechanisms10.1021/es071739c ↗
11. Carbonate species as OH- carriers for decreasing the pH gradient between cathode and anode in biological fuel cells10.1021/es8019353 ↗
12. Carbon dioxide addition to microbial fuel cell cathodes maintains sustainable catholyte pH and improves anolyte pH, alkalinity, and conductivity10.1021/es9031985 ↗
13. Evaluating the impacts of migration in the biofilm anode using the model PCBIOFILM10.1016/j.electacta.2010.06.061 ↗
14. Variation of power generation at different buffer types and conductivities in single chamber microbial fuel cells10.1016/j.bios.2009.10.005 ↗
15. Ironies in microbial electrochemistry10.1061/(ASCE)EE.1943-7870.0001202 ↗
16. Analysis of a microbial electrochemical cell using the proton condition in biofilm (PCBIOFILM) model10.1016/j.biortech.2010.03.100 ↗
17. Effect of electrolyte pH on the rate of the anodic and cathodic reactions in an air-cathode microbial fuel cell10.1016/j.bioelechem.2008.07.007 ↗
18. Impedance characteristics and polarization behavior of a microbial fuel cell in response to short-term changes in medium pH10.1021/es201737g ↗
19. Evaluation of electrode and solution area-based resistances enables quantitative comparisons of factors impacting microbial fuel cell performance10.1021/acs.est.8b06004 ↗
20. Unveiling the role of gas permeability in air cathodes and performance enhancement by waterproof membrane fabricating method10.1016/j.jpowsour.2019.227570 ↗
21. Controlling the occurrence of power overshoot by adapting microbial fuel cells to high anode potentials10.1016/j.bioelechem.2012.10.004 ↗
22. Effects of constant or dynamic low anode potentials on microbial community development in bioelectrochemical systems10.1007/s00253-015-6907-4 ↗
23. Interplay of anode , cathode , and current in microbial fuel cells : implications for wastewater treatment10.1002/ente.201500397 ↗
24. Full cell simulation and the evaluation of the buffer system on air-cathode microbial fuel cell10.1016/j.jpowsour.2017.02.031 ↗
25. Applying the electrode potential slope method as a tool to quantitatively evaluate the performance of individual microbial electrolysis cell components10.1016/j.biortech.2019.121418 ↗
26. The impact of new cathode materials relative to baseline performance of microbial fuel cells all with the same architecture and solution chemistry10.1039/C7EE00910K ↗
27. Power generation using an activated carbon and metal mesh cathode in a microbial fuel cell10.1016/j.elecom.2009.09.024 ↗
28. Set potential regulation reveals additional oxidation peaks of Geobacter sulfurreducens anodic biofilms10.1016/j.elecom.2012.06.013 ↗
29. Spotlight on the energy harvest of electroactive microorganisms: the impact of the applied anode potential
30. Examination of microbial fuel cell start-up times with domestic wastewater and additional amendments10.1016/j.biortech.2011.04.087 ↗
31. Direct biological conversion of electrical current into methane by electromethanogenesis10.1021/es803531g ↗
32. Adaptation to high current using low external resistances eliminates power overshoot in microbial fuel cells10.1016/j.bios.2011.06.045 ↗
33. Analysis of polarization methods for elimination of power overshoot in microbial fuel cells10.1016/j.elecom.2010.11.011 ↗
34. Impact of ohmic resistance on measured electrode potentials and maximum power production in microbial fuel cells10.1021/acs.est.8b02055 ↗
35. Reference and counter electrode positions affect electrochemical characterization of bioanodes in different bioelectrochemical systems10.1002/bit.25253 ↗
36. Unraveling the contributions of internal resistance components in two-chamber microbial fuel cells using the electrode potential slope analysis10.1016/j.electacta.2020.136291 ↗
37. Comment on “Unbiased solar H2 production with current density up to 23 mA cm-2 by Swiss-cheese black Si coupled with wastewater bioanode10.1039/C9EE02592H ↗
38. Coupling of electricity generation and denitrification in three-phase single-chamber MFCs in high-salt conditions10.1016/j.bioelechem.2020.107481 ↗
39. Geobacter anodireducens sp. nov., an exoelectrogenic microbe in bioelectrochemical systems10.1099/ijs.0.061598-0 ↗
40. Osmotic pressure compensated solute ectoine improves salt tolerance of microbial cells in microbial fuel cells10.1002/fuce.201900051 ↗
41. Effect of pH on the activity of platinum group metal-free catalysts in oxygen reduction reaction10.1021/acscatal.7b03991 ↗
42. Immobilization of a metal-nitrogen-carbon catalyst on activated carbon with enhanced cathode performance in microbial fuel cells10.1002/cssc.201600573 ↗