Comparison of chromium poisoning between lanthanum strontium manganite and lanthanum strontium ferrite composite cathodes in solid oxide fuel cells
Source abstract
Abstract
Abstract Degradation mechanisms of chromium poisoning have been extensively investigated for last two decades on various cathode materials for solid oxide fuel cells. While most researchers used half-cell experiments to investigate the effects of chromium impurities, this paper compares the degradation phenomena of LSM-YSZ and LSF-GDC cathodes in full cells under different operating conditions, namely polarized current density and humidity over the cathode. Under cathodic load, performance degradation of LSF-GDC cathode is significantly less than that of LSM-YSZ cathode. Most interestingly, under humidified air condition, LSF-based cell hardly experiences performance degradation while LSM-based cell shows a catastrophic degradation. Cr deposition in LSM-based cells occurs mainly near the electrolyte under both dry and humidified air conditions. In contrast, Cr deposition in LSF-based cell concentrates at the cathode surface under dry air condition, but concentrates both at cathode surface and near electrolyte under humidified air condition. Microstructure analysis reveals Mn-associated Cr deposits in LSM-based cathode, and Sr- and Fe-associated Cr deposits in LSF-based cathode. With the help of distribution of relaxation time analysis, the different electrochemical behaviors of LSM- and LSF-based cells are carefully interpreted. The effects of electrochemical deposition, Sr surface segregation, and humidity on LSM- and LSF-based cathodes are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Chromium deposition and poisoning of cathodes of solid oxide fuel cells–a review10.1016/j.ijhydene.2013.10.042 ↗
2. Chromium poisoning effects on performance of (La,Sr)MnO3-based cathode in anode-supported solid oxide fuel cells10.1149/2.0441707jes ↗
3. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
4. Roles of humidity and cathodic current in chromium poisoning of Sr-doped LaMnO3-based cathodes in solid oxide fuel cells10.1016/j.jpowsour.2017.06.005 ↗
5. Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes10.1149/1.1837264 ↗
6. Mitigation of chromium poisoning of cathodes in solid oxide fuel cells employing CuMn1.8O4 spinel coating on metallic interconnect10.1016/j.jpowsour.2017.11.069 ↗
7. A fundamental study of chromium deposition on solid oxide fuel cell cathode materials10.1016/j.jpowsour.2006.02.017 ↗
8. Chromium transport by solid state diffusion on solid oxide fuel cell cathode10.1016/j.jpowsour.2010.06.017 ↗
9. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
10. High performance ceramic interconnect material for solid oxide fuel cells (SOFCs): Ca-and transition metal-doped yttrium chromite10.1016/j.jpowsour.2011.06.089 ↗
11. High sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs10.1016/j.jpowsour.2007.11.058 ↗
12. CuMn1.8O4 protective coatings on metallic interconnects for prevention of Cr-poisoning in solid oxide fuel cells10.1016/j.jpowsour.2017.12.031 ↗
13. Cu1.3Mn1.7O4 spinel coatings deposited by electrophoretic deposition on Crofer 22 APU substrates for solid oxide fuel cell applications10.1016/j.surfcoat.2016.09.028 ↗
14. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties10.1016/j.ssi.2004.10.004 ↗
15. (Mn,Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications10.1016/j.ijhydene.2006.08.048 ↗
16. Metallic interconnects for SOFC: characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys10.1016/j.jpowsour.2007.06.255 ↗
17. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
18. Electrical conductivity and thermal expansion of spinels at elevated temperatures10.1111/j.1551-2916.2007.01522.x ↗
19. Ferritic stainless steel interconnects for protonic ceramic electrochemical cell stacks: oxidation behavior and protective coatings10.1016/j.ijhydene.2019.08.041 ↗
20. Chromium poisoning of La1-xSrxMnO3±δ cathodes and electrochemical validation of chromium getters in intermediate temperature-solid oxide fuel cells10.1149/2.0931913jes ↗
21. Strontium manganese oxide getter for capturing airborne Cr and S contaminants in high-temperature electrochemical systems10.1021/acsami.9b09677 ↗
22. Performance and microstructure of a novel Cr-getter material with LSCF-based cells in a generic stack test fixture10.1149/07801.1047ecst ↗
23. Development of Cr-tolerant cathodes of solid oxide fuel cells10.1149/1.2828212 ↗
24. A new, high electrochemical activity and chromium tolerant cathode for solid oxide fuel cells10.1016/j.ijhydene.2015.09.091 ↗
25. Chemical compatibility and electrochemical property of intermediate-temperature SOFC cathodes under Cr poisoning condition10.1016/j.jpowsour.2007.10.068 ↗
26. Characterization and performance of (La,Ba)(Co,Fe)O3 cathode for solid oxide fuel cells with iron–chromium metallic interconnect10.1016/j.jpowsour.2008.02.093 ↗
27. Improved tolerance of lanthanum nickelate (La2NiO4+δ) cathodes to chromium poisoning under current load in solid oxide fuel cells10.1007/s11837-019-03724-0 ↗
28. Effects of chromium poisoning on the long-term oxygen exchange kinetics of the solid oxide fuel cell cathode materials La0.6Sr0.4CoO3 and Nd2NiO410.1016/j.jpowsour.2010.10.064 ↗
29. Enhanced chromium tolerance of La0.6Sr0.4Co0.2Fe0.8O3-δ electrode of solid oxide fuel cells by Gd0.1Ce0.9O1.95 impregnation10.1016/j.elecom.2013.10.019 ↗
30. An effective strategy to enhancing tolerance to contaminants poisoning of solid oxide fuel cell cathodes10.1016/j.nanoen.2018.03.043 ↗
31. Promoted Cr-poisoning tolerance of La2NiO4+δ-coated PrBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode for intermediate temperature solid oxide fuel cells10.1016/j.electacta.2018.03.053 ↗
32. Highly chromium contaminant tolerant BaO infiltrated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells10.1039/C4CP04172K ↗
33. High performance metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2018.11.004 ↗
34. Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2019.226935 ↗
35. Dependence of SOFC cathode degradation by chromium-containing alloy on compositions of electrodes and electrolytes10.1149/1.1339869 ↗
36. Chromium poisoning and degradation at (La,Sr)MnO3 and (La,Sr)FeO3 cathodes for solid oxide fuel cells10.1149/1.3322103 ↗
37. Chromium poisoning of LSM/YSZ and LSCF/CGO composite cathodes10.1002/fuce.200800143 ↗
38. Long-term Cr poisoning effect on LSCF-GDC composite cathodes sintered at different temperatures10.1149/2.0841609jes ↗
39. Effect of temperature on the chromium deposition and poisoning of La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes of solid oxide fuel cells10.1016/j.electacta.2014.07.028 ↗
40. Chromium poisoning effects on surface exchange kinetics of La0.6Sr0.4Co0.2Fe0.8O3-δ10.1021/acsami.7b02762 ↗
41. Accelerated testing of chromium poisoning of Sr-containing mixed conducting Solid Oxide Cell air electrodes10.3389/fenrg.2018.00070 ↗
42. Optimized lanthanum ferrite-based cathodes for anode-supported SOFCs10.1149/1.1483156 ↗
43. Electron/hole and ion transport in La1-xSrxFeO3-δ10.1016/S0022-4596(03)00040-9 ↗
44. Chromium poisoning effects on various cathodes
45. SOFC performance with Fe-Cr-Mn alloy interconnect10.1149/1.1864332 ↗
46. The ionic conductivity, thermal expansion behavior, and chemical compatibility of La0.54Sr0.44Co0.2Fe0.8O3-δ as SOFC cathode material10.1016/j.solidstatesciences.2011.07.007 ↗
47. Introduction of A-site deficiency into La0.6Sr0.4Co0.2Fe0.8O3-δ and its effect on structure and conductivity10.1016/j.ssi.2004.11.021 ↗
48. Electrical conductivity of sintered LSM ceramics
49. Effect of Laves phase strengthening on the mechanical properties of high Cr ferritic steels for solid oxide fuel cell interconnect application10.1016/j.msea.2011.03.112 ↗
50. Activation, microstructure, and polarization of solid oxide fuel cell cathodes10.1007/s10008-005-0076-9 ↗
51. In situ study of activation and de-activation of LSM fuel cell cathodes–Electrochemistry and surface analysis of thin-film electrodes10.1016/j.jcat.2012.07.010 ↗
52. Electrode activation of anode-supported SOFCs with LSM-or LSCF-type cathodes10.1016/j.ssi.2005.12.038 ↗
53. Evidence for two activation mechanisms in LSM SOFC cathodes10.1149/1.3231500 ↗
54. Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+δ cathodes of solid oxide fuel cells10.1016/j.ijhydene.2009.12.185 ↗
55. The effect of chromium oxyhydroxide on solid oxide fuel cells10.1149/1.3266930 ↗
56. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
57. Degradation of anode supported cell (ASC) performance by Cr-poisoning10.1016/j.jpowsour.2010.10.033 ↗
58. Electrochemical analysis of sulfur-poisoning in anode supported SOFCs fuelled with a model reformate10.1149/2.015206jes ↗
59. Performance and degradation of an SOEC stack with different cell components10.1016/j.electacta.2017.11.180 ↗
60. Use of a distribution function of relaxation times (DFRT) in impedance analysis of SOFC electrodes10.1016/j.ssi.2017.11.021 ↗
61. Metal‐supported solid oxide electrolysis cell with significantly enhanced catalysis10.1002/ente.201801154 ↗
62. A linear Kronig‐Kramers transform test for immittance data validation10.1149/1.2044210 ↗
63. A method for improving the robustness of linear Kramers-Kronig validity tests10.1016/j.electacta.2014.01.034 ↗
64. A highly efficient multi-phase catalyst dramatically enhances the rate of oxygen reduction10.1016/j.joule.2018.02.008 ↗
65. Performance and degradation of solid oxide electrolysis cells in stack10.1149/2.0941508jes ↗
66. Detailed electrochemical performance and microstructural characterization of nickel–Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel–Gadolinium doped ceria nanoparticles10.1016/j.jpowsour.2019.227357 ↗
67. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni∕ 8YSZ cermet electrodes10.1149/1.2908860 ↗
68. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
69. High temperature electrocatalytic properties of the SOFC air electrode La0.8Sr0.2MnO3/YSZ10.1016/S0167-2738(97)00495-5 ↗
70. Wang · 2017
71. Isotopic-switching analysis of oxygen reduction in solid oxide fuel cell cathode materials10.1016/j.ssi.2009.12.011 ↗
72. Reactive mechanisms of LSCF single-phase and LSCF-CGO composite electrodes operated in anodic and cathodic polarisations10.1016/j.electacta.2015.06.080 ↗
73. Oxygen exchange kinetics of La0.4Sr0.6FeO3-δ by simultaneous application of conductivity relaxation and carrier gas coulometry10.1016/j.ssi.2003.12.045 ↗
74. A SIMS study of oxygen tracer diffusion and surface exchange in La0.8Sr0.2MnO3+δ10.1016/S0167-577X(99)00228-1 ↗
75. Study of activation effect of anodic current on La0.6Sr0.4Co0.2Fe0.8O3-δ air electrode in solid oxide electrolyzer cell10.1016/j.electacta.2016.05.058 ↗
76. A comparison of O2 reduction reactions on porous (La,Sr)MnO3 and (La,Sr)(Co,Fe)O3 electrodes10.1016/S0167-2738(01)00997-3 ↗
77. Strong performance improvement of La0.6Sr0.4Co0.8Fe0.2O3-δ SOFC cathodes by electrochemical activation10.1149/1.2034529 ↗
78. Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y2O3 and the high chromium ferritic steel Crofer22APU10.1149/1.2172563 ↗
79. Degradation of (La0.6Sr0.4)0.95(Co0.2Fe0.8)O3-δ solid oxide fuel cell cathodes at the nanometer scale and below10.1021/acsami.6b05290 ↗
80. Synergistic effects of temperature and polarization on Cr poisoning of La0.6Sr0.4Co0.2Fe0.8O3-δ solid oxide fuel cell cathodes10.1039/C9TA01275C ↗
81. Evaluation of cation migration in lanthanum strontium cobalt ferrite solid oxide fuel cell cathodes via in-operando X-ray diffraction10.1039/C7TA06856E ↗
82. Effect of Sr content and strain on Sr surface segregation of La1-xSrxCo0.2Fe0.8O3-δ as cathode material for solid oxide fuel cells10.1021/acsami.6b07118 ↗
83. Electrochemically driven cation segregation in the mixed conductor La0.6Sr0.4Co0.2Fe0.8O3-δ10.1016/j.ssi.2012.02.006 ↗
84. Investigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes10.1039/C1EE02762J ↗
85. Insight into surface segregation and chromium deposition on La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes of solid oxide fuel cells10.1039/C4TA01426J ↗