journal article·2020-10

Highly conductive KNiF3@carbon nanotubes composite materials with cross-linked structure for high performance supercapacitor

Hongguang Fan, Xu Zhang, Youcheng Wang, Junwei Lang, Rongjie Gao

Publisher page

Abstract

Abstract A series of KNiF3@carbon nanotubes (CNTs) are synthesized via a facile solvothermal method and applied as supercapacitor electrodes. The addition of carbon nanotubes can significantly overcome the rate capability defect of bare KNiF3 and improve the specific capacity to a certain extent, which mainly owing to the increase of conductivity and electron/ion transports capacity. In addition, the cross-linked structure of carbon nanotubes and the evenly anchoring of KNiF3 nanoparticles can increase the stability of the composites. As a result, the optimal candidate KNiF3@CNTs-8 (the content of carbon nanotubes is 8 mg and the mass fraction is 1.0%) shows highest specific capacity (821.4 C g−1 at 1 A g−1) and capacity retention (83.6% at 16 A g−1). The asymmetric supercapacitor AC//KNiF3@CNTs-8 delivers extremely high energy density of 63.7 Wh kg−1. More importantly, the ASC device shows ultra-long cycling stability, with 95.9% capacity retention after 5000 cycles. These results prove that KNiF3@CNTs can be a promising material for supercapacitor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Boosting the cycling stability of transition metal compounds-based supercapacitors10.1016/j.ensm.2018.09.007 ↗
2. Spinel-type solar-thermal conversion coatings on supercapacitors: an effective strategy for capacitance recovery at low temperatures10.1016/j.ensm.2019.05.016 ↗
3. A wearable system based on core-shell structured peptide-Co9S8 supercapacitor and triboelectric nanogenerator10.1016/j.nanoen.2019.104149 ↗
4. Highly enhanced energy density of supercapacitors at extremely low temperatures10.1016/j.jpowsour.2019.03.096 ↗
5. Structure-designed synthesis of hierarchical NiCo2O4@NiO composites for high-performance supercapacitors10.1016/j.jcis.2019.08.078 ↗
6. Where do batteries end and supercapacitors begin?10.1126/science.1249625 ↗
7. Supercapacitor electrode materials: nanostructures from 0 to 3 dimensions10.1039/C4EE03229B ↗
8. Integrated conductive hybrid architecture of metal-organic framework nanowire array on polypyrrole membrane for all-solid-state flexible supercapacitors
9. Asymmetric supercapacitive characteristics of PANI embedded holey graphene nanoribbons10.1021/acssuschemeng.5b00184 ↗
10. Enhanced electrochemical performances of agglomeration-free LaMnO3 perovskite nanoparticles and achieving high energy and power densities with symmetric supercapacitor design10.1016/j.cej.2018.01.022 ↗
11. Anion charge storage through oxygen intercalation in LaMnO3 perovskite pseudocapacitor electrodes10.1038/nmat4000 ↗
12. Perovskite SrCo0.9Nb0.1O3-δ as an anionintercalated electrode material for supercapacitors with ultrahigh volumetric energy density10.1002/anie.201603601 ↗
13. Symmetric/asymmetric supercapacitor based on the perovskite-type lanthanum cobaltate nanofibers with Sr-substitution10.1016/j.electacta.2015.08.033 ↗
14. Sr-doped lanthanum nickelate nanofibers for high energy density supercapacitors10.1016/j.electacta.2015.05.131 ↗
15. Modulating Mn4+ Ions and oxygen vacancies in nonstoichiometric LaMnO3 perovskite by a facile sol-gel method as high-performance supercapacitor electrodes10.1016/j.electacta.2017.09.076 ↗
16. A fiber supercapacitor with high energy density based on hollow graphene/conducting polymer fiber electrode10.1002/adma.201600689 ↗
17. Reduced graphene oxide/polypyrrole nanotube papers for flexible all-solid-state supercapacitors with excellent rate capability and high energy density10.1016/j.jpowsour.2015.10.035 ↗
18. Preparation and performance of tubular nanoflaky (Ni, Co, Mn) oxides with hierarchical mesoporous structure10.1016/j.jallcom.2015.03.178 ↗
19. Perovskite KNi0.8Co0.2F3 nanocrystals for supercapacitors10.1039/C7TA05209J ↗
20. Mn and Co co-doped perovskite fluorides KNiF3 with enhanced capacitive performance10.1016/j.jcis.2019.09.051 ↗
21. High-performance supercapacitors based on the carbon nanotubes, graphene and graphite nanoparticles electrodes
22. One-step solution combustion synthesis of cobaltenickel oxides/C/Ni/CNTs nanocomposites as electrochemical capacitors electrode materials10.1016/j.jpowsour.2014.10.201 ↗
23. Enhanced electrochemical studies of ZnO/CNT nanocomposite for supercapacitor devices10.1016/j.physb.2019.05.025 ↗
24. One-step solvothermal synthesis of feather duster-like CNT@WO3 as high-performance electrode for supercapacitor10.1016/j.matlet.2019.03.070 ↗
25. Asymmetric supercapacitors based on carbon nanotubes@NiO ultrathin nanosheets core-shell composites and MOF-derived porous carbon polyhedrons with super-long cycle life10.1016/j.jpowsour.2015.03.106 ↗
26. Facile construction of sandwich-like Co3O4/CNTs complex for high-performance asymmetric supercapacitors10.1002/slct.201900539 ↗
27. One-pot synthesis CoFe2O4/CNTs composite for asymmetric supercapacitor electrode10.1016/j.ssi.2018.11.006 ↗
28. Mesostructured carbon nanotube-on-MnO2 nanosheet composite for high-performance supercapacitors10.1021/acsami.8b14109 ↗
29. Microwave synthesis of MoS2/MoO2@CNT nanocomposites with excellent cycling stability for supercapacitor electrodes10.1039/C9TC02391G ↗
30. Hydrothermal synthesis of VS4/CNTs composite with petal-shape structures performing a high specific capacity in a large potential range for high-performance symmetric supercapacitors10.1016/j.jcis.2019.06.105 ↗
31. In-situ growth of binder-free CNTs@Ni-Co-S nanosheet core/shell hybrids on Ni mesh for high energy density asymmetric supercapacitors10.1039/C6TA02410F ↗
32. MOF-derived micro structural interconnected network porous Mn2O3/C as the negative electrode material for asymmetric supercapacitor device10.1039/C8CE01683F ↗
33. A novel intercalation pseudocapacitive electrode material: VO(OH)2/CNT composite with cross-linked structure for high performance flexible symmetric supercapacitors10.1016/j.apsusc.2019.06.270 ↗
34. Supersonically sprayed Zn2SnO4/SnO2/CNT nanocomposites for high-performance supercapacitor electrodes10.1021/acssuschemeng.9b02549 ↗
35. Vacancy defective perovskite Na0.85Ni0.45Co0.55F3.56 nanocrystal anodes for advanced lithium-ion storage driven by surface conversion and insertion hybrid mechanisms10.1039/C9CC03053K ↗
36. Supercapacitors with high capacitance based on reduced graphene oxide/carbon nanotubes/NiO composite electrodes10.1039/C3TA15004F ↗
37. Hierarchically porous CoFe2O4 nanosheets supported on Ni foam with excellent electrochemical properties for asymmetric supercapacitors10.1016/j.apsusc.2017.04.067 ↗
38. Bimetallic Co-Mn perovskite fluorides as high-stable electrode materials for supercapacitors10.1002/chem.201703938 ↗
39. Molten salt synthesis and supercapacitor properties of oxygen-vacancy LaMnO3-δ10.1016/j.jechem.2019.09.007 ↗
40. Fabrication of a Mo-doped strontium cobaltite perovskite hybrid supercapacitor cell with high energy density and excellent cycling life10.1002/cssc.201801869 ↗
41. Effect of doping on the performance of high-crystalline SrMnO3 perovskite nanofibers as a supercapacitor electrode10.1016/j.ceramint.2018.08.313 ↗
42. Construction of spherical NiO@MnO2 with core-shell structure obtained by depositing MnO2 nanoparticles on NiO nanosheets for high-performance supercapacitor10.1016/j.ceramint.2019.08.278 ↗
43. Facile fabrication of binder-free reduced graphene oxide/MnO2/Ni foam hybrid electrode for high-performance supercapacitors10.1016/j.jallcom.2019.152124 ↗
44. A facile preparation of graphene/reduced graphene oxide/Ni(OH)2 two dimension nanocomposites for high performance supercapacitors10.1016/j.apt.2019.09.019 ↗
45. Metal-organic frameworks derived N, S co-doped bimetal nanocomposites as high-performance electrodes materials for supercapacitor10.1016/j.jallcom.2019.151961 ↗
46. Facile syntheses and electrochemical properties of Ni(OH)2 nanosheets/porous Ni foam for supercapacitor application10.1016/j.matlet.2019.126656 ↗
47. Three dimensional NiS2-Ni(OH)2/CNT nanostructured assembly for supercapacitor and oxygen evolution reaction10.1016/j.jallcom.2019.152126 ↗
48. Hierarchical FeCo2O4@NiCo layered double hydroxide core/shell nanowires for high performance flexible all-solid-state asymmetric supercapacitors10.1016/j.cej.2017.11.089 ↗
49. Fabrication of 3D Co-doped Ni-based MOF hierarchical micro-flowers as a high-performance electrode material for supercapacitors10.1016/j.apsusc.2019.03.340 ↗
50. Fast and reversible surface redox reaction of graphene-MnO2 composites as supercapacitor electrodes10.1016/j.carbon.2010.06.047 ↗
51. Effect of surface area and heteroatom of porous carbon materials on electrochemical capacitance in aqueous and organic electrolytes10.1007/s11426-014-5123-x ↗
52. Construction of ball-flower like NiS2@MoS2 composite for high performance supercapacitors10.1016/j.electacta.2019.135208 ↗
53. Ni3S2@polypyrrole composite supported on nickel foam with improved rate capability and cycling durability for asymmetric supercapacitor device applications10.1007/s10853-016-0529-9 ↗
54. One-pot solvothermal synthesis of ternary Ni-Co-P micro/nano-structured materials for high performance aqueous asymmetric supercapacitors10.1016/j.cej.2017.03.060 ↗
55. Design and synthesis of NiCo2O4-reduced graphene oxide composites for high performance supercapacitors10.1039/c1jm10758e ↗