Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes
Source abstract
Abstract
Abstract The Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) is surface-modified using phosphoric acid (HPO) and silane reagents, and water-based cathode slurries of unmodified and modified NCM811 are prepared with poly(acrylonitrile) (PAN) or poly(acrylic acid) (PAA) added as the binder to compare the electrochemical performances of the constructed cells. Surface modification using HPO or the addition of PAA as the binder can substantially reduce the alkalinity of the prepared aqueous slurry of NCM811, thereby preventing the slurry from corroding the aluminum current collector, as well as retaining the good structural integrity of the dried electrode. The aforementioned advantage about the reduction in the alkalinity is not achieved when the hydrophobic silane-modified NCM811 or the neutral binder PAN is used. The best cell performance in terms of electrochemical reversibility, ionic and electronic impedance, and cycle stability is obtained when the water-based cathode slurry is prepared using HPO-modified NCM811 as the cathode active and PAA as the binder simultaneously. Moreover, the addition of PAA rather than the adoption of HPO-modified NCM811 contributes more to the improvement of cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
2. Nickel‐rich and lithium‐rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
3. Layered cathode materials for lithium-ion batteries: review of computational studies on LiNi1-x-yCoxMnyO2 and LiNi1-x-yCoxAlyO210.1021/acs.chemmater.9b04066 ↗
4. Improved electrochemical performance of the LiNi0.8Co0.1Mn0.1O2 material with lithium-ion conductor coating for lithium-ion batteries10.1016/j.ssi.2017.10.017 ↗
5. 30 years of lithium‐ion batteries
6. Prospect and reality of Ni‐rich cathode for commercialization
7. Recent progress in surface coating of layered LiNixCoyMnzO2 for lithium-ion batteries10.1016/j.materresbull.2017.05.021 ↗
8. Direct in situ observation of Li2O evolution on Li-Rich high-capacity cathode material, Li[NixLi(1–2x)/3Mn(2–x)/3]O2 (0≤ x≤ 0.5)10.1021/ja410137s ↗
9. Effect of residual lithium compounds on layer Ni-rich Li[Ni0. 7Mn0. 3]O210.1149/2.042406jes ↗
10. The study of electrolyte solutions based on ethylene and diethyl carbonates for rechargeable Li batteries: II. Graphite electrodes10.1149/1.2048659 ↗
11. Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO210.1016/j.jpowsour.2007.04.083 ↗
12. Solubility of lithium salts formed on the lithium-ion battery negative electrode surface in organic solvents10.1149/1.3239850 ↗
13. Washing of nickel-rich cathode materials for lithium-ion batteries: towards a mechanistic understanding10.1149/2.1351915jes ↗
14. An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer10.1007/s12274-014-0631-8 ↗
15. Surface modification of LiNi0.8Co0.1Mn0.1O2 by WO3 as a cathode material for LIB10.1016/j.apsusc.2019.03.116 ↗
16. Surface Mn oxidation state controlled spinel LiMn2O4 as a cathode material for high‐energy Li‐ion batteries10.1002/aenm.201500440 ↗
17. Synthesis of Li2Si2O5-coated LiNi0.6Co0.2Mn0.2O2 cathode materials with enhanced high-voltage electrochemical properties for lithium-ion batteries10.1016/j.jallcom.2016.03.060 ↗
18. Overcoming the chemical instability on exposure to air of Ni-rich layered oxide cathodes by coating with spinel LiMn1.9Al0.1O410.1039/C6TA01061J ↗
19. Li3PO4 surface coating on Ni-rich LiNi0.6Co0.2Mn0.2O2 by a citric acid assisted sol-gel method: improved thermal stability and high-voltage performance10.1016/j.jpowsour.2017.05.042 ↗
20. Amorphous Li-Zr-O layer coating on the surface of high-Ni cathode materials for lithium ion batteries10.1016/j.electacta.2018.06.062 ↗
21. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
22. Preparation and rate capability of carbon coated LiNi1/3Co1/3Mn1/3O2 as cathode material in lithium ion batteries10.1021/acsami.6b16741 ↗
23. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
24. Ni-rich LiNi0.8Co0.1Mn0.1O2 oxide coated by dual-conductive layers as high performance cathode material for lithium-ion batteries10.1021/acsami.7b08006 ↗
25. Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries10.1016/j.ensm.2019.08.020 ↗
26. Comparative analysis of aqueous binders for high-energy Li-rich NMC as a Lithium-Ion cathode and the impact of adding phosphoric acid10.1021/acsami.8b03657 ↗
27. Investigations on high energy lithium-ion batteries with aqueous binder10.1016/j.electacta.2013.09.068 ↗
28. Low cost, environmentally benign binders for lithium-ion batteries10.1149/1.3291976 ↗
29. Effects of interactions between binders and different-sized silicons on dispersion homogeneity of anodes and electrochemistry of lithium-silicon batteries10.1016/j.jpowsour.2018.10.087 ↗
30. Influence of the PVDF binder on the stability of LiCoO2 electrodes10.1016/j.elecom.2005.09.010 ↗
31. Electrochemical impedance spectra of full cells: relation to capacity and capacity-rate of rechargeable Li cells using LiCoO2, LiMn2O4, and LiNiO2 cathodes10.1016/S0378-7753(97)02708-0 ↗
32. Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode10.1016/j.jpowsour.2009.12.101 ↗
33. The polyacrylic latex: an efficient water-soluble binder for LiNi1/3Co1/3Mn1/3O2 cathode in li-ion batteries10.1007/s10008-015-2967-8 ↗
34. A novel and efficient water-based composite binder for LiCoO2 cathodes in lithium-ion batteries10.1016/j.jpowsour.2007.07.073 ↗
35. Importance of binder compositions to the dispersion and electrochemical properties of water-based LiCoO2 cathodes10.1016/j.jpowsour.2012.11.025 ↗
36. Electrochemical properties of LiCoO2 electrodes with latex binders on high-voltage exposure10.1149/2.0151504jes ↗
37. Effects of pH on the dispersion and cell performance of LiCoO2 cathodes based on the aqueous process10.1007/s10853-006-1172-7 ↗
38. Tailoring structure of Ni-rich layered cathode enable robust calendar life and ultrahigh rate capability for lithium-ion batteries10.1016/j.electacta.2019.134587 ↗
39. Enhanced electrochemical properties of Li(Ni0.4Co0.3Mn0.3)O2 cathode by surface modification using Li3PO4-based materials10.1016/j.jpowsour.2010.09.027 ↗
40. An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer10.1007/s12274-014-0631-8 ↗
41. Improved electrochemical performances of LiNi0.6Co0.2Mn0.2O2 cathode material by reducing lithium residues with the coating of Prussian blue10.1016/j.jallcom.2018.09.286 ↗
42. One-pot and ultrafast synthesis of nitrogen and phosphorus co-doped carbon dots possessing bright dual wavelength fluorescence emission10.1039/C5NR05549K ↗
43. Characterization of silane layers on modified stainless steel surfaces and related stainless steel–plastic hybrids10.1016/j.apsusc.2011.05.058 ↗
44. Role of surface phosphorus complexes on the oxidation of porous carbons10.1016/j.fuproc.2016.11.014 ↗
45. Kissa · 1999
46. Comparative study of the electrochemical performance of LiNi0.5Co0.2Mn0.3O2 and LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium ion batteries10.1016/j.ssi.2018.10.020 ↗
47. Dual functions of zirconium modification on improving the electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O210.1039/C7SE00513J ↗
48. A novel synthesis strategy to improve cycle stability of LiNi0.8Mn0.1Co0.1O2 at high cut-off voltages through core-shell structuring10.1007/s12274-019-2469-6 ↗
49. Suppressing the phase transition of the layered Ni-rich oxide cathode during high-voltage cycling by introducing low-content Li2MnO310.1021/acsami.5b09938 ↗
50. Carbon-encapsulated gigaporous microsphere as potential Si anode-active material for lithium-ion batteries10.1016/j.carbon.2020.01.021 ↗