Aggregated and ionic cross-linked anion exchange membrane with enhanced hydroxide conductivity and stability
Source abstract
Abstract
Abstract In order to achieve a better trade-off among ionic conductivity, mechanical strength and chemical stability, a series of novel aggregated and ionic cross-linked anion exchange membranes (AEMs) are recommended, namely, acS6QAPSF, acS8QAPSF and acS10QAPSF. Cross-linked network shoulders the responsibility to toughen the acSxQAPSF. Appropriate micro-morphology is responsible for facilitating the conduction of OH− and improving the alkaline stability of the acSxQAPSF. Compared with the original QAPSF, acSxQAPSF membranes exhibit much better properties. Specifically, for acS8QAPSF, a high OH− conductivity of 90.5 mS cm−1 is achieved at 80 °C, with the swelling degree of 10.0%. The tensile strength and elongation at break of wet acS8QAPSF at 25 °C are 23.9 Mpa and 21.1%, respectively. After testing in 1 M NaOH at 80 °C for 30 days, the weight loss of acS8QAPSF is 8.0%, with the losses of tensile strength and elongation at break of 13.8% and 13.3%, respectively. Its IEC and IC retentions are 92.0% and 90.5%, respectively. For acS8QAPSF, a fuel cell peak power density of 0.612 W cm−2 is obtained at 60 °C. While for QAPSF, its fuel cell peak power density is only 0.101 W cm−2, and the film is cracked after the 30 days stability test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Prospects for alkaline anion-exchange membranes in low temperature fuel cells10.1002/fuce.200400045 ↗
2. Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts10.1073/pnas.0810041106 ↗
3. A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell10.1002/cssc.200700013 ↗
4. Anion exchange membranes: current status and moving forward10.1002/polb.23395 ↗
5. Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells10.1021/ja204166e ↗
6. Alkaline polymer electrolyte membranes for fuel cell applications10.1039/c3cs60053j ↗
7. Constructing ionic highway in alkaline polymer electrolytes10.1039/C3EE43275K ↗
8. Transport properties of hydroxide and proton conducting membranes10.1021/cm703263n ↗
9. An effective approach for alleviating cation-induced backbone degradation in aromatic ether-based alkaline polymer electrolytes10.1021/am508009z ↗
10. Backbone stability of quaternized polyaromatics for alkaline membrane fuel cells10.1016/j.memsci.2012.08.045 ↗
11. Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups10.1039/c2ee22466f ↗
12. A stable hydroxide-conducting polymer10.1021/ja303067t ↗
13. Assessing the influence of different cation chemistries on ionic conductivity and alkaline stability of anion exchange membranes10.1039/c2jm14898f ↗
14. Two-dimensional NMR spectroscopy reveals cation-triggered backbone degradation in polysulfone-based anion exchange membranes10.1073/pnas.1217215110 ↗
15. Quantitative 1 H NMR analysis of chemical stabilities in anion exchange membranes10.1021/mz300486h ↗
16. Degradation of imidazolium- and quaternary ammonium-functionalized poly (fluorenyl ether ketone sulfone) anion exchange membranes10.1021/am301557w ↗
17. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
18. Anion exchange composite membrane based on octa quaternary ammonium polyhedral oligomeric silsesquioxane for alkaline fuel cells10.1016/j.jpowsour.2017.06.053 ↗
19. Fabrication of anion-exchange composite membranes for alkaline direct methanol fuel cells10.1016/j.jpowsour.2011.10.020 ↗
20. Preparation of novel poly (vinyl alcohol)/SiO2 nano- composite membranes by a sol-gel process and their application on alkaline DMFCs10.1016/j.desal.2011.03.079 ↗
21. Novel quaternized polysulfone/ZrO2 composite membranes for solid alkaline fuel cell applications10.1016/j.ijhydene.2011.03.056 ↗
22. Novel morpholinium-functionalized anion-exchange PBI-polymer blends10.1039/C4TA05026F ↗
23. Graphene oxide-polymer nanocomposite anion-exchange membranes10.1149/2.0681504jes ↗
24. Enhanced properties of quaternized graphenes reinforced polysulfone based composite anion exchange membranes for alkaline fuel cell10.1016/j.memsci.2015.03.077 ↗
25. Azide-assisted crosslinked quaternized polysulfone with reduced graphene oxide for highly stable anion exchange membranes10.1016/j.memsci.2017.02.023 ↗
26. High-performance layered double hydroxide/poly(2,6-dimethyl-1,4-phenylene oxide) membrane with porous sandwich structure for anion exchange membrane fuel cell applications10.1016/j.memsci.2018.01.045 ↗
27. Charge mosaic membranes with semi-interpenetrating network structures prepared from a polymer blend of poly(vinyl alcohol) and polyelectrolytes10.1016/j.memsci.2012.10.034 ↗
28. Semi-interpenetrating polymer networks by azide-alkyne cycloaddition as novel anion exchange membranes10.1039/C8TA02177E ↗
29. Self-crosslinked alkaline polymer electrolyte exceptionally stable at 90 °C10.1039/c0cc03618h ↗
30. Tunable high performance cross-linked alkaline anion exchange membranes for fuel cell applications10.1021/ja908638d ↗
31. Ionic crosslinking of imidazolium functionalized poly (aryl ether ketone) by sulfonated poly(ether ether ketone) for anion exchange membranes10.1016/j.jcis.2017.03.033 ↗
32. Crosslinked sulfonated poly(arylene ether ketone) membranes bearing quinoxaline and acid-base complex cross-linkages for fuel cell applications10.1016/j.jpowsour.2010.10.039 ↗
33. Preparing alkaline anion exchange membrane with enhanced hydroxide conductivity via blending imidazolium-functionalized and sulfonated poly (ether ether ketone)10.1016/j.jpowsour.2015.04.112 ↗
34. Covalent-ionically cross-linked poly (Etheretherketone)-basic polysulfone blend ionomer membranes10.1002/fuce.200500207 ↗
35. Mechanically robust anion exchange membranes via long hydrophilic cross-linkers10.1021/acs.macromol.6b01381 ↗
36. Cross-linked comb-shaped anion exchange membranes with high base stability10.1039/c3cc49027k ↗
37. Alkaline stable C2-substituted imidazolium-based cross-linked anion exchange membranes for alkaline fuel cell applications10.1016/j.jpowsour.2014.05.003 ↗
38. Low-temperature crosslinking of anion exchange membranes10.1039/C3PY01490H ↗
39. Highly conductive and stable hybrid ionic cross-linked sulfonated PEEK for fuel cell10.1016/j.electacta.2018.08.147 ↗
40. Highly stable alkaline polymer electrolyte based on a poly (ether ether ketone) backbone10.1021/am4043257 ↗
41. Nanocomposite membranes based on sulfonated polysulfone and sulfated nano-titania/NMPA for proton exchange membrane fuel cells10.1016/j.ssi.2013.11.054 ↗
42. Miscibility behavior of polybenzimidazole/sulfonated polysulfone blends for use in fuel cell applications10.1021/ma000165s ↗
43. Preparation of sulfonated zeolite ZSM-5/sulfonated polysulfone composite membranes as PEM for direct methanol fuel cell application10.1016/j.ssi.2018.02.019 ↗
44. Designing advanced alkaline polymer electrolytes for fuel cell applications10.1021/ar200201x ↗
45. Synthesis and characterization of novel acide base polymer blends for application in membrane fuel cells10.1016/S0167-2738(99)00181-2 ↗
46. Mechanically tough and chemically stable anion exchange membranes from rigid-flexible semi-interpenetrating networks10.1021/acs.chemmater.5b02557 ↗
47. Varying the microphase separation patterns of alkaline polymer electrolytes10.1039/C5TA09438K ↗
48. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
49. Effect of micromorphology on alkaline polymer electrolyte stability10.1021/acsami.8b09481 ↗
50. Multication side chain anion exchange membranes10.1021/acs.macromol.5b02671 ↗
51. Elastic long-chain multication cross-linked anion exchange membranes10.1021/acs.macromol.6b01140 ↗
52. Synthesis and characterization of anion exchange multi-block copolymer membranes with a fluorine moiety as alkaline membrane fuel cells10.1016/j.jpowsour.2017.05.086 ↗
53. Anion exchange composite membrane based on octa quaternary ammonium polyhedral oligomeric silsesquioxane for alkaline fuel cells10.1016/j.jpowsour.2017.06.053 ↗
54. Anion exchange membrane crosslinked in the easiest way stands out for fuel cells10.1016/j.jpowsour.2018.04.064 ↗
55. Alkaline polymer electrolyte fuel cells stably working at 80 °C10.1016/j.jpowsour.2018.04.047 ↗
56. Sulfonated nanobamboo fiber-reinforced quaternary ammonia poly (ether ether ketone) membranes for alkaline polymer electrolyte fuel cells10.1021/acsami.8b12637 ↗
57. Ionomer cross-linking immobilization of catalyst nanoparticles for high performance alkaline membrane fuel cells10.1021/acs.chemmater.9b00999 ↗
58. Anion exchange membranes with "rigid-side-chain" symmetric piperazinium structures for fuel cell exceeding 1.2 W cm -2 at 60 °C10.1016/j.jpowsour.2019.227021 ↗