journal article·2020-04

A simple and effective method of enhancing the proton conductivity of polybenzimidazole proton exchange membranes through protonated polymer during solvation

Liming Ding, Yahui Wang, Lihua Wang, Zhiping Zhao, Min He, Yanlin Song

Publisher page

Abstract

Abstract Acid-doped polybenzimidazole (PBI) membranes are proton exchange membranes (PEM) which show promise for use in vanadium redox flow batteries (VRFBs). Fluorine-containing PBI membranes can withstand the strong acidity and oxidative electrolytes of VRFB due to their excellent oxidative resistance. However, the proton conductivity of dense fluorine-containing PBI membranes is moderate. In this work, the protic solvent methanesulfonic acid (MSA) was used to enhance the proton conductivity of hexafluoroisopropylidene group containing PBI (6FPBI) PEM and the performance of this membrane (6FPBI-MSA) was compared with that of a membrane (6FPBI-DMAc) that was manufactured using the aprotic solvent N,N-Dimethylacetamide (DMAc). MSA can protonate the nitrogen atoms in imidazole groups during polymer solvation, and the positively charged nitrogen atoms prevent the formation of intermolecular hydrogen bonds among polymers by electrostatic repulsion. Hence, the free volume and amorphous state of the 6FPBI-MSA were superior to those of 6FPBI-DMAc membrane. The proton conductivity of the 6FPBI-MSA membrane (8.371 mS cm−1) is significantly higher than that of the 6FPBI-DMAc membrane (4.904 mS cm−1). Correspondingly, the energy efficiency of the 6FPBI-MSA membrane is superior to that of the 6FPBI-DMAc membrane at various current densities. Protonation of 6FPBI using MSA during dissolution is an effective way to enhance its proton conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. A study of the V(Ii)/V(Iii) redox couple for redox flow cell applications10.1016/0378-7753(85)80071-9 ↗
2. Investigation of the V(V)/V(Iv) system for use in the positive half-cell of a redox battery10.1016/0378-7753(85)80082-3 ↗
3. Vanadium flow battery for energy storage: prospects and challenges10.1021/jz4001032 ↗
4. Recent advancements in all-vanadium redox flow batteries10.1002/admi.201500309 ↗
5. The next generation vanadium flow batteries with high power density - a perspective10.1039/C7CP07456E ↗
6. Poly(arylene ether ketone) proton exchange membranes grafted with long aliphatic pendant sulfonated groups for vanadium redox flow batteries10.1039/C6TA07456A ↗
7. Polybenzimidazole membranes with nanophase-separated structure induced by non-ionic hydrophilic side chains for vanadium flow batteries10.1039/C7TA08790J ↗
8. Evaluation of the chemical stability of some membranes in vanadium solution10.1023/A:1018495722379 ↗
9. Performance of Nafion® N115, Nafion® NR-212, and Nafion® NR-211 in a 1 kW class all vanadium mixed acid redox flow battery10.1016/j.jpowsour.2015.03.099 ↗
10. A hydrocarbon/Nafion bilayer membrane with a mechanical nano-fastener for vanadium redox flow batteries10.1039/C7TA02921G ↗
11. Urushi/nafion hybrid membranes for an all-vanadium redox flow battery10.1002/slct.201800020 ↗
12. Doping structure and degradation mechanism of polypyrrole-Nafion (R) composite membrane for vanadium redox flow batteries10.1039/C6RA23630H ↗
13. hydrophilic channel alignment of perfluoronated sulfonic-acid Ionomers for vanadium redox flow batteries10.1021/acsami.8b03985 ↗
14. Effectively suppressing vanadium permeation in vanadium redox flow battery application with modified Nafion membrane with nacre-like nanoarchitectures10.1016/j.jpowsour.2017.03.124 ↗
15. Influence of aminosilane precursor concentration on physicochemical properties of composite Nafion membranes for vanadium redox flow battery applications10.1016/j.jpowsour.2016.11.045 ↗
16. Uncovering the structure of nafion-SiO2 hybrid Ionomer membranes for prospective large-scale energy storage devices10.1002/adfm.201501116 ↗
17. Highly ion selective hydrocarbon-based membranes containing sulfonated hypercrosslinked polystyrene nanoparticles for vanadium redox flow batteries10.1016/j.memsci.2018.06.022 ↗
18. Poly(phenylene sulfide sulfone) based membranes with improved stability for vanadium redox flow batteries10.1039/C7TA03046K ↗
19. Effect of non-sulfonated diamine monomer on branched sulfonated polyimide membrane for vanadium redox flow battery application10.1016/j.electacta.2017.04.009 ↗
20. A low-cost and high-performance sulfonated polyimide proton-conductive membrane for vanadium redox flow/static batteries10.1021/acsami.7b07437 ↗
21. Novel sulfonated polyimide/polyvinyl alcohol blend membranes for vanadium redox flow battery applications10.1039/C4TA05504G ↗
22. A novel chloromethylated/quaternized poly(sulfone)/poly(vinylidene fluoride) anion exchange membrane with ultra-low vanadium permeability for all vanadium redox flow battery10.1016/j.memsci.2017.09.015 ↗
23. Crosslinked anion exchange membranes with primary diamine-based crosslinkers for vanadium redox flow battery application10.1016/j.jpowsour.2017.07.068 ↗
24. Low permeable composite membrane based on sulfonated poly(phenylene oxide) (sPPO) and silica for vanadium redox flow battery10.1016/j.ijhydene.2017.06.030 ↗
25. Polymer electrolyte membrane based on sulfonated poly(phenylene oxide) for vanadium redox flow battery (VRFB)10.1166/jnn.2017.14173 ↗
26. Highly stable pyridinium-functionalized cross-linked anion exchange membranes for all vanadium redox flow batteries10.1016/j.jpowsour.2016.09.065 ↗
27. Advanced porous membranes with ultra-high selectivity and stability for vanadium flow batteries10.1039/C5EE02896E ↗
28. Porous poly(benzimidazole) membrane for all vanadium redox flow battery10.1016/j.jpowsour.2016.02.042 ↗
29. Highly proton conductive, dense polybenzimidazole membranes with low permeability to vanadium and enhanced H2SO4 absorption capability for use in vanadium redox flow batteries10.1039/C6TA05080H ↗
30. The use of polybenzimidazole membranes in vanadium redox flow batteries leading to increased coulombic efficiency and cycling performance10.1016/j.electacta.2014.11.185 ↗
31. Low vanadium ion permeabilities of sulfonated poly(phthalazinone ether ketone)s provide high efficiency and stability for vanadium redox flow batteries10.1016/j.jpowsour.2017.04.045 ↗
32. Poly(p-phenylene)-based membrane materials with excellent cell efficiencies and durability for use in vanadium redox flow batteries10.1039/C7TA03131A ↗
33. Ultra-high proton/vanadium selectivity of a modified sulfonated poly(arylene ether ketone) composite membrane for all vanadium redox flow batteries10.1039/C7TA05155G ↗
34. Poly(2,5-benzimidazole)/sulfonated sepiolite composite membranes with low phosphoric acid doping levels for PEMFC applications in a wide temperature range10.1016/j.memsci.2018.12.085 ↗
35. Benzimidazole grafted polybenzimidazole cross-linked membranes with excellent PA stability for high-temperature proton exchange membrane applications10.1016/j.apsusc.2018.09.170 ↗
36. Recent advances in polybenzimidazole/phosphoric acid membranes for high-temperature fuel cells10.1002/pi.4708 ↗
37. High temperature polymer electrolyte membrane fuel cell performance of PtxCoy/C cathodes10.1016/j.jpowsour.2009.12.022 ↗
38. High-temperature fuel cell membranes based on mechanically stable para-ordered polybenzimidazole prepared by direct casting10.1016/j.jpowsour.2007.07.040 ↗
39. Polybenzimidazoles for high temperature fuel cell applications10.1002/marc.200400167 ↗
40. Proton conductivity: materials and applications10.1021/cm950192a ↗
41. Tuning the ion selectivity of porous poly(2,5-benzimidazole) membranes by phase separation for all vanadium redox flow batteries10.1016/j.memsci.2018.03.086 ↗
42. Amphoteric nanoporous polybenzimidazole membrane with extremely low crossover for a vanadium redox flow battery10.1039/C5RA26244E ↗
43. Polybenzimidazole membranes embedded with ionic liquids for use in high proton selectivity vanadium redox flow batteries10.1016/j.electacta.2018.11.123 ↗
44. Blending polybenzimidazole with an anion exchange polymer increases the efficiency of vanadium redox flow batteries10.1016/j.memsci.2019.03.014 ↗
45. Preparation of covalently cross-linked sulfonated polybenzimidazole membranes for vanadium redox flow battery applications10.1016/j.memsci.2016.10.050 ↗
46. Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole10.1039/a906060j ↗
47. Proton conduction in acid doped polybenzimidazole10.1016/S0167-2738(98)00466-4 ↗
48. Preparation and characterization of novel pyridine-containing polybenzimidazole membrane for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2015.12.006 ↗
49. Developments of new proton conducting membranes based on different polybenzimidazole structures for fuel cells applications10.1016/j.jpowsour.2006.01.081 ↗
50. Enhancement of gas permeation properties of polybenzimidazoles by systematic structure architecture10.1016/j.memsci.2006.09.030 ↗
51. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
52. Polybenzimidazole block copolymers for fuel cell: synthesis and studies of block length effects on nanophase separation, mechanical properties, and proton conductivity of PEM10.1021/am500668c ↗
53. Novel sulfonated poly (ether ether keton)/polyetherimide acid-base blend membranes for vanadium redox flow battery applications10.1016/j.electacta.2014.02.144 ↗
54. Aggregation behavior of polybenzimidazole in aprotic polar solvent10.1021/ma070049q ↗
55. Limitations of the X-ray photoelectron spectroscopy technique in the study of electroactive polymers10.1021/jp962497y ↗
56. Performance enhancement in organic solvent nanofiltration by double crosslinking technique using sulfonated polyphenylsulfone (sPPSU) and polybenzimidazole (PBI)10.1016/j.memsci.2018.01.047 ↗
57. The effect of electric field on the oxidative degradation of polybenzimidazole membranes using electro-Fenton test10.1016/j.polymdegradstab.2017.02.014 ↗
58. Enhancement of fluorescent intensities of poly(quinoline)s in solution and in the solid state10.1021/ma9911694 ↗
59. An overview of the glass-transition temperature of synthetic-polymers10.1021/ed061p668 ↗
60. Advancing the development of highly-functionalizable glucose-based polycarbonates by tuning of the glass transition temperature10.1021/jacs.8b10675 ↗
61. Effect of heat treatment on the structure and properties of poly(2,6-benzothiazole) (ABPBT) and poly(2,5-benzoxazole) (ABPBO)10.1023/A:1026781013224 ↗
62. Effect of composition on the properties of PEM based on polybenzimidazole and poly(vinylidene fluoride) blends10.1016/j.polymer.2013.12.021 ↗
63. Self-healing proton-exchange membranes composed of nafion-poly(vinyl alcohol) complexes for durable direct methanol fuel cells
64. Anion conductive membrane performance facilitation via tethering flexible with rigid backbones using oscillational chain10.1016/j.jpowsour.2019.226856 ↗
65. Acid resistant PVDF-co-HFP based copolymer proton exchange membrane for electro-chemical application10.1016/j.memsci.2018.12.006 ↗
66. Anion conductive piperidinium based poly (ether sulfone): synthesis, properties and cell performance10.1016/j.memsci.2019.117471 ↗
67. Enhancing proton conductivity of polybenzimidazole membranes by introducing sulfonate for vanadium redox flow batteries applications10.1016/j.memsci.2019.02.050 ↗
68. Novel amphoteric ion exchange membranes by blending sulfonated poly(ether ether ketone)/quaternized poly(ether imide) for vanadium redox flow battery applications10.1039/C5TA04351D ↗
69. Achieving efficient and inexpensive vanadium flow battery by combining CexZr1-xO2 electrocatalyst and hydrocarbon membrane10.1016/j.cej.2018.09.069 ↗