High-performance boron-doped silicon micron-rod anode fabricated using a mass-producible lithography method for a lithium ion battery
Source abstract
Abstract
Abstract Although silicon (Si) attracts great attention as a high-capacity anode material in lithium ion batteries (LiBs), a large volume being expanded during charge/discharge (de/lithiation) cycling is a significant problem resulting in a fast capacity fade. To prevent the problem, a variety of Si structures with nano/microscales have been incorporated into the anode, but such structures still have difficulties in terms of mass production. Herein, we present a new way to repetitively produce micron boron (B)-doped Si rods from Si wafer through laser interference lithography (LIL) in combination with the metal assisted chemical etching (MACE) process, enabling the mass-production of multiple Si rods at low cost. Moreover, the effects of the B-doping level of the produced Si rods on the electrochemical LiB performances are studied in detail. As a result, the lightly B-doped Si rod (~1015 atoms cm−3) anodes exhibit the highest initial capacity of 3524 mAh g−1 and cyclic performance, showing a high average Coulombic efficiency (CE) of 98.1% and a capacity fading rate (per cycle) of 0.11% during 500 cycles. It is due to the highest kinetics of de/lithiation on the surface of the lightly B-doped Si rod attributed to favorable phase transition of Si and diffusion of Li ions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. High-capacity cathode material with high voltage for Li-ion batteries
2. Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.9%10.1039/C6EE02685K ↗
3. Silicon oxides: a promising family of anode materials for lithium-ion batteries10.1039/C8CS00441B ↗
4. Fast-charging high-energy lithium-ion batteries via implantation of amorphous silicon nanolayer in edge-plane activated graphite anodes10.1038/s41467-017-00973-y ↗
5. A review of the development of full cell lithium-ion batteries: the impact of nanostructured anode materials10.1007/s12274-016-1171-1 ↗
6. Achieving high gravimetric energy density for flexible lithium-ion batteries facilitated by core-double-shell electrodes10.1039/C8EE00522B ↗
7. Facile synthesis of silicon nanoparticles inserted into graphene sheets as improved anode materials for lithium-ion batteries10.1039/c2cc17061b ↗
8. Si nanowire arrays as anodes in Li ion batteries10.1002/pssr.200903344 ↗
9. Small particle size multiphase Li-alloy anodes for lithium-ionbatteries10.1016/S0167-2738(96)00389-X ↗
10. High energy density all-solid-state batteries: a challenging concept towards 3D integration10.1002/adfm.200701245 ↗
11. Volume expansion during lithiation of amorphous silicon thin film electrodes studied by in-operando neutron reflectometry10.1021/jp502261t ↗
12. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
13. Nanostructured hybrid silicon/carbon
14. High-performance lithium-ion anodes using a hierarchical bottom-up approach10.1038/nmat2725 ↗
15. Silicon-based anodes for lithium-ion Batteries : from fundamentals to practical applications10.1002/smll.201702737 ↗
16. Bioinspired , spine-like , flexible , rechargeable lithium-ion batteries with high energy density10.1002/adma.201704947 ↗
17. Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase control10.1038/nnano.2012.35 ↗
18. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
19. Porous doped silicon nanowires for lithium ion battery anode with long cycle life10.1021/nl300206e ↗
20. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
21. High capacity Li ion battery anodes using Ge nanowires10.1021/nl0727157 ↗
22. Silicon nanotube battery anodes10.1021/nl902058c ↗
23. Silicon nanotube anode for lithium-ion batteries10.1016/j.elecom.2013.01.015 ↗
24. A laser ablation method for the synthesis of crystalline semiconductor nanowires10.1126/science.279.5348.208 ↗
25. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
26. Upgraded silicon nanowires by metal-assisted etching of metallurgical Silicon : a new route to nanostructured solar-grade silicon10.1002/adma.201300973 ↗
27. Control orientation of of thickness and solution-grown nanowires silicon
28. The influence of substrate orientation on the density of silicon nanowires grown on multicrystalline and single crystal substrates by electron cyclotron resonance chemical vapour deposition10.1016/j.tsf.2011.10.019 ↗
29. Silicon core–hollow carbon shell nanocomposites with tunable buffer voids for high capacity anodes of lithium-ion batteries10.1039/c2cp42231j ↗
30. Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles10.1038/ncomms2941 ↗
31. Journal of Materials Science & Technology Silicon lithium-ion battery anode with enhanced performance : multiple effects of silver nanoparticles10.1016/j.jmst.2018.02.004 ↗
32. Ion and electron irradiation-induced effects in nanostructured materials10.1063/1.3318261 ↗
33. Lithium transport at silicon thin film: barrier for high-rate capability anode10.1063/1.3462998 ↗
34. Anodic dissolution of p- and n-type silicon: kinetic study of the chemical mechanism10.1016/0022-0728(90)87005-5 ↗
35. Electronic origin for the phase transition from amorphous LixSi to crystalline Li15Si410.1021/nn402349j ↗
36. Bulk micromachining of Si by metal-assisted chemical etching10.1002/smll.201303379 ↗
37. Degradation of crystalline silicon due to boron-oxygen defects10.1109/JPHOTOV.2016.2614119 ↗
38. The influence of carrier density and doping type on lithium insertion and extraction processes at silicon surfaces10.1016/j.electacta.2014.05.035 ↗
39. Electrochemical characteristics of semi conductive silicon anode for lithium polymer batteries10.1007/s10832-009-9573-z ↗
40. Boron-doped porous Si anode materials with high initial coulombic efficiency and long cycling stability10.1039/C7TA10153H ↗
41. Revealing lithium-silicide phase transformations in nano-structured silicon-based lithium ion batteries via in situ NMR spectroscopy10.1038/ncomms4217 ↗
42. Real-time NMR investigations of structural changes in silicon electrodes for lithium-ion batteries real-time NMR investigations of structural changes in silicon electrodes for lithium-ion batteries
43. Pair distribution function analysis and solid state NMR studies of silicon electrodes for lithium ion Batteries : understanding the (de) lithiation mechanisms10.1021/ja108085d ↗
44. Highly conductive boron doped micro/nanocrystalline silicon thin films deposited by VHF-PECVD for solar cell applications10.1016/j.jallcom.2015.04.077 ↗
45. Boron-doped nanocrystalline silicon thin films for solar cells10.1016/j.apsusc.2011.05.052 ↗
46. Improved rate capability of Si-C composite anodes by boron doping for lithium-ion batteries10.1016/j.elecom.2013.09.004 ↗
47. Ultrafast electrochemical lithiation of individual Si nanowire anodes10.1021/nl200412p ↗
48. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
49. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
50. Studying the kinetics of crystalline silicon nanoparticle lithiation with in situ transmission electron microscopy10.1002/adma.201202744 ↗
51. Novel spinel Li5Cr9Ti4O24anode: its electrochemical property and lithium storage process10.1016/j.electacta.2016.05.040 ↗
52. Observation of the lithium storage behavior in LiCrTiO4via in-situ and ex-situ techniques10.1016/j.electacta.2016.06.158 ↗
53. Dopant modulated Li insertion in Si for battery anodes: theory and experiment10.1021/jp2060602 ↗
54. Understanding the thermal instability of fluoroethylene carbonate in LiPF6-based electrolytes for lithium ion batteries10.1016/j.electacta.2016.12.126 ↗
55. Influence of EDTA in poly(acrylic acid) binder for enhancing electrochemical performance and thermal stability of silicon anode10.1016/j.apsusc.2018.04.004 ↗