Synthesis of binder-like molecules covalently linked to silicon nanoparticles and application as anode material for lithium-ion batteries without the use of electrolyte additives
Source abstract
Abstract
Abstract A chemically modified silicon anode is prepared for application as anode in lithium-ion batteries by covalent attachment of polyacrylic acid to enable self-adhesion between the active material particles. The polyacrylic acid polymer is formed by atom transfer radical polymerization using 1-(bromoethyl)benzene initiator groups initially bonded to a hydrogenated silicon surface. The grafting of 1-(bromoethyl)benzene and polyacrylic acid is confirmed by various material characterization techniques. The electrochemical performance of the silicon anodes is also evaluated by galvanostatic cycling. The chemically modified composite silicon anode (with active material loading of 0.9–1 mg cm −2 ) showed a significantly improved performance in terms of: gravimetric capacitance (more than 2000 mAh g −1 ) after 300 cycles and 80% capacity retention with an average 99.6% Coulombic efficiency at a current density of 0.34 A g −1 . However, the unmodified electrode cycled 75 times in the same conditions only retains 46% of its initial capacity with an average 95.1% Coulombic efficiency. The new composite Si electrode performs better at high charge/discharge rate and allows the use of larger proportion of the active material by reducing the amount of binder. It is noteworthy that these composite silicon electrodes are tested without the use of expensive electrolyte additives.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Silicon-based nanomaterials for lithium-ion batteries: a review10.1002/aenm.201300882 ↗
3. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
4. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
5. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
6. A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries10.1016/j.jpowsour.2005.05.062 ↗
7. First principles study of lithium insertion in bulk silicon10.1088/0953-8984/22/41/415501 ↗
8. Sulphur-TiO2 yolk-shell nanoarchitecture with internal void space for long-cycle lithium-sulphur batteries10.1038/ncomms2327 ↗
9. Enhanced high-temperature cycle-life of mesophase graphite anode with styrene–butadiene rubber/carboxymethyl cellulose binder10.1149/2.008206eel ↗
10. A yolk-shell design for stabilized and scalable li-ion battery alloy anodes10.1021/nl3014814 ↗
11. Well-constructed silicon-based materials as high-performance lithium-ion battery anodes10.1039/C5NR06278K ↗
12. Effects of the volume changes and elastic-strain energies on the phase transition in the Li-Sn battery10.1016/j.jpowsour.2016.08.136 ↗
13. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries10.1002/adma.201301795 ↗
14. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
15. Toward silicon anodes for next-generation lithium ion batteries: a comparative performance study of various polymer binders and silicon nanopowders10.1021/am401642c ↗
16. Breathing silicon anodes for durable high-power operations10.1038/srep14433 ↗
17. Reliable reference electrodes for lithium-ion batteries10.1016/j.elecom.2013.03.015 ↗
18. Stabilizing nanosized Si anodes with the synergetic usage of atomic layer deposition and electrolyte additives for Li-Ion batteries10.1021/acsami.5b01853 ↗
19. Nanostructured photon management for high performance solar cells10.1016/j.mser.2010.06.018 ↗
20. Surface-active and stimuli-responsive polymer–Si(100) hybrids from surface-initiated atom transfer radical polymerization for control of cell adhesion10.1021/bm049675a ↗
21. Polydopamine wrapping silicon cross-linked with polyacrylic acid as high-performance anode for lithium-ion batteries10.1021/acsami.5b10616 ↗
22. Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries10.1186/1556-276X-9-360 ↗
23. Self-generated concentration and modulus gradient coating design to protect Si nano-wire electrodes during lithiation10.1039/C5CP07219K ↗
24. Silicon as anode for high-energy lithium ion batteries: from molten ingot to nanoparticles10.1016/j.jpowsour.2015.09.040 ↗
25. Ordered vacancy compounds and nanotube formation in CuInSe 2 −CdS core−shell nanowires10.1021/nl0721463 ↗
26. Analysis of lithium insertion/deinsertion in a silicon electrode particle at room temperature10.1149/1.3474225 ↗
27. Novel size and surface oxide effects in silicon nanowires as lithium battery anodes10.1021/nl202630n ↗
28. Construction of functional aliphatic polycarbonates for biomedical applications10.1016/j.progpolymsci.2011.07.008 ↗
29. Effect of silicon configurations on the mechanical integrity of silicon–carbon nanotube heterostructured anode for lithium ion battery: a computational study10.1016/j.jpowsour.2015.11.027 ↗
30. Review—advances in anode and electrolyte materials for the progress of lithium-ion and beyond lithium-ion batteries10.1149/2.0191514jes ↗
31. Strategies to succeed in improving the lithium-ion storage properties of silicon nanomaterials10.1039/C5TA06962A ↗
32. Decomposition of the fluoroethylene carbonate additive and the glue effect of lithium fluoride products for the solid electrolyte interphase: an ab initio study10.1039/C5CP07583A ↗
33. Role of surface oxides in the formation of solid-electrolyte interphases at silicon electrodes for lithium-ion batteries10.1021/am506517j ↗
34. Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control10.1038/nnano.2012.35 ↗
35. Facile synthesis of binder-free reduced graphene oxide/silicon anode for high-performance lithium ion batteries10.1016/j.jpowsour.2016.01.106 ↗
36. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
37. Advances on the use of diazonium chemistry for functionalization of materials used in energy storage systems10.1016/j.carbon.2015.05.030 ↗
38. Polyacrylate as functional binder for silicon and graphite composite electrode in lithium-ion batteries10.5796/electrochemistry.79.6 ↗
39. Low cost, environmentally benign binders for lithium-ion batteries10.1149/1.3291976 ↗
40. A mechanically robust and highly ion-conductive polymer-blend coating for high-power and long-life lithium-ion battery anodes10.1002/adma.201403880 ↗
41. A major constituent of brown algae for use in high-capacity Li-ion batteries10.1126/science.1209150 ↗
42. Towards a fundamental understanding of the improved electrochemical performance of silicon–carbon composites10.1002/adfm.200600937 ↗
43. Key parameters governing the reversibility of Si/Carbon/CMC electrodes for Li-ion batteries10.1021/cm902688w ↗
44. Sin · 2013 · 247
45. A film maturation process for improving the cycle life of Si-based anodes for Li-ion batteries10.1016/j.elecom.2015.10.014 ↗
46. Improved performance in micron-sized silicon anodes by in situ polymerization of acrylic acid-based slurry10.1039/C6TA05650D ↗
47. Influence of the binder types on the electrochemical characteristics of natural graphite electrode in room-temperature ionic liquid10.1016/j.jpowsour.2010.12.007 ↗
48. A comparative study of polyacrylic acid and poly(vinylidene difluoride) binders for spherical natural graphite/LiFePO4 electrodes and cells10.1016/j.jpowsour.2011.04.043 ↗
49. Superabsorbent polymer binder for achieving MnO2 supercapacitors of greatly enhanced capacitance density10.1016/j.elecom.2010.04.012 ↗
50. Chemical coupling of carbon nanotubes and silicon nanoparticles for improved negative electrode performance in lithium-ion batteries10.1002/adfm.201002100 ↗
51. Graphite-grafted silicon nanocomposite as a negative electrode for lithium-ion batteries10.1002/adma.200900235 ↗
52. Improving the cyclability of Si anodes by covalently grafting with 4-carboxyphenyl groups10.1016/j.elecom.2010.01.024 ↗
53. Poly (acrylic acid sodium) grafted carboxymethyl cellulose as a high performance polymer binder for silicon anode in lithium ion batteries10.1038/srep19583 ↗
54. Multifunctional carbon for electrochemical double-layer capacitors10.1002/adfm.201503738 ↗
55. Chemical reactivity of hydrogen-terminated crystalline silicon surfaces10.1016/j.cossms.2006.03.006 ↗
56. Effect of doping on the modification of polycrystalline silicon by spontaneous reduction of diazonium salts10.1016/j.apsusc.2014.07.012 ↗
57. Controlled grafting of well-defined epoxide polymers on hydrogen-terminated silicon substrates by surface-initiated ATRP at ambient temperature10.1021/la036089e ↗
58. Grafting of nitrophenyl groups on carbon and metallic surfaces without electrochemical induction10.1021/cm0490625 ↗
59. Attachment of organic layers to conductive or semiconductive surfaces by reduction of diazonium salts10.1039/b406228k ↗
60. Atom transfer radical polymerization (ATRP): current status and future perspectives10.1021/ma3001719 ↗
61. Spontaneous grafting of diazonium salts: chemical mechanism on metallic surfaces10.1021/la3011103 ↗
62. Thermal degradation of poly(acrylic acid) containing copper nitrate10.1016/j.polymdegradstab.2004.04.009 ↗
63. Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 1—poly(acrylic acid)10.1016/0141-3910(90)90034-5 ↗
64. Metal complexes of poly(acrylic acid): synthesis, characterization and thermogravimetric studies10.1016/S0141-3910(97)00095-5 ↗
65. Passivation of Si(111) surfaces with electrochemically grafted thin organic films10.1016/j.susc.2010.06.005 ↗
66. Electrochemical passivation of Si and SiGe surfaces
67. Surface band structure of aryl-diazonium modified p-Si electrodes determined by X-ray photoelectron spectroscopy and electrochemical measurements10.1039/c3ra44366c ↗
68. Covalent functionalizations of silicon surfaces and their application to biosensors10.1166/sam.2011.1179 ↗
69. Organometallic chemistry on silicon surfaces: formation of functional monolayers bound through Si-C bonds10.1039/a900108e ↗
70. Molecular grafting on silicon anodes: artificial solid-electrolyte interphase and surface stabilization10.1016/j.electacta.2016.03.105 ↗
71. Aldrich · 2016
72. Smith · 2002
73. Surface modifications of electrode materials for lithium ion batteries10.1016/j.solidstatesciences.2005.10.019 ↗
74. Electrochemical formation of close-packed phenyl layers on Si(111)10.1021/jp962581d ↗
75. Phenyl layers on H–Si(111) by electrochemical reduction of diazonium salts: monolayer versus multilayer formation10.1016/S0022-0728(03)00076-7 ↗
76. Stuart · 2004
77. Nanostructured Si-Based anodes for lithium-ion batteries10.1166/jnn.2015.9712 ↗
78. Systematic molecular-level design of binders incorporating Meldrum's acid for silicon anodes in lithium rechargeable batteries10.1002/adma.201402950 ↗
79. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
80. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
81. A mechanically robust and highly ion-conductive polymer-blend coating for high-power and long-life lithium-ion battery anodes10.1002/adma.201403880 ↗
82. Polymeric artificial solid/electrolyte interphases for Li-ion batteries10.1016/j.pnsc.2015.11.009 ↗
83. Promise and reality of post-lithium-ion batteries with high energy densities
84. Promises and challenges of nanomaterials for lithium-based rechargeable batteries10.1038/nenergy.2016.71 ↗