Inverse parameter determination in the development of an optimized lithium iron phosphate – Graphite battery discharge model
Source abstract
Abstract
Abstract Battery models are riddled with incongruous values of parameters considered for validation. In this work, thermally coupled electrochemical model of the pouch is developed and discharge tests on a LiFePO 4 pouch cell at different discharge rates are used to optimize the LiFePO 4 battery model by determining parameters for which there is no consensus in literature. A discussion on parameter determination, selection and comparison with literature values has been made. The electrochemical model is a P2D model, while the thermal model considers heat transfer in 3D. It is seen that even with no phase change considered for LiFePO 4 electrode, the model is able to simulate the discharge curves over a wide range of discharge rates with a single set of parameters provided a dependency of the radius of the LiFePO 4 electrode on discharge rate. The approach of using a current dependent radius is shown to be equivalent to using a current dependent diffusion coefficient. Both these modelling approaches are a representation of the particle size distribution in the electrode. Additionally, the model has been thermally validated, which increases the confidence level in the selection of values of parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Goonam · 2012
2. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
3. Cramming more components onto integrated circuits10.1109/JPROC.1998.658762 ↗
4. A general energy balance for battery systems10.1149/1.2113792 ↗
5. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
6. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
7. Discharge model for the lithium iron-phosphate electrode10.1149/1.1785012 ↗
8. A discharge model for phase transformation electrodes: formulation, experimental validation, and analysis10.1021/jp074490u ↗
9. Discharge model for LiFePO[sub 4] accounting for the solid solution range10.1149/1.2980420 ↗
10. Predicting active material utilization in lifepo[sub 4] electrodes using a multiscale mathematical model10.1149/1.3425620 ↗
11. Intercalation dynamics in rechargeable battery materials: general theory and phase-transformation waves in LiFePO410.1016/j.electacta.2008.03.083 ↗
12. Kinetics of non-equilibrium lithium incorporation in LiFePO410.1038/nmat3065 ↗
13. M.Z. Bazant, Theory of Electrochemical Kinetics based on Nonequilibrium Thermodynamics, (n.d.).
14. Effect of a size-dependent equilibrium potential on nano-LiFePO4 particle interactions10.1149/2.0161509jes ↗
15. Mathematical modeling of lithium iron phosphate electrode: galvanostatic charge/discharge and path dependence10.1149/1.3515902 ↗
16. Simplified electrochemical and thermal model of LiFePO4-graphite Li-ion batteries for fast charge applications10.1149/2.064209jes ↗
17. A distributed thermal model for a Li-ion electrode plate pair10.1016/j.jpowsour.2012.08.012 ↗
18. Electrochemical-thermal analysis of 18650 lithium iron phosphate cell10.1016/j.enconman.2013.05.040 ↗
19. Modeling and simulation of lithium-ion batteries from a systems engineering perspective10.1149/2.018203jes ↗
20. Thermal and electrochemical coupled modeling of a lithium-ion cell
21. Modeling of a commercial graphite/LiFePO[sub 4] Cell10.1149/1.3567007 ↗
22. Heats of mixing and of entropy in porous insertion electrodes10.1016/S0378-7753(03)00283-0 ↗
23. Dodd · 2007 · 2007
24. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
25. Transport properties of LiPF[sub 6]-based Li-ion battery electrolytes10.1149/1.1872737 ↗
26. The effect of battery design parameters on heat generation and utilization in a Li-ion cell10.1016/j.electacta.2012.07.081 ↗
27. Thermophysical properties of LiFePO4 cathodes with carbonized pitch coatings and organic binders: experiments and first-principles modeling10.1016/j.jpowsour.2013.11.022 ↗
28. Development of first principles capacity fade model for Li-ion cells10.1149/1.1634273 ↗
29. The effect of temperature on lithium intercalation into carbon materials10.1007/s100080050091 ↗
30. Temperature effect on the lithium diffusion rate in graphite10.1134/S1023193506030086 ↗
31. Study of LiFePO[sub 4] by cyclic voltammetry10.1149/1.2434687 ↗
32. Delithiation kinetics study of carbon coated and carbon free LiFePO410.1016/j.jpowsour.2013.12.054 ↗
33. Entropy changes due to structural transformation in the graphite anode and phase change of the LiCoO[sub 2] cathode10.1149/1.1393549 ↗
34. Analysis of electrochemical and thermal behavior of Li-ion cells10.1149/1.1526512 ↗
35. Three-dimensional modeling of electrochemical performance and heat generation of lithium-ion batteries in tabbed planar configurations10.1149/1.3591799 ↗
36. Analysis of electric and thermal behaviour of lithium-ion cells in realistic driving cycles10.1016/j.jpowsour.2014.06.010 ↗
37. An electrochemical-thermal model based on dynamic responses for lithium iron phosphate battery10.1016/j.jpowsour.2014.01.007 ↗
38. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
39. Room-temperature miscibility gap in LixFePO410.1038/nmat1634 ↗
40. Electrochemical modeling of lithium-ion positive electrodes during hybrid pulse power characterization tests10.1149/1.2939211 ↗
41. Design and optimization of a natural graphite/iron phosphate lithium-ion cell10.1149/1.1785013 ↗
42. Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries10.1016/S0378-7753(99)00527-3 ↗
43. Computer simulations of a lithium-ion polymer battery and implications for higher capacity next-generation battery designs10.1149/1.1569478 ↗
44. Toward understanding of electrical limitations (electronic, ionic) in LiMPO[sub 4] (M=Fe, Mn) electrode materials10.1149/1.1884787 ↗
45. Understanding rate-limiting mechanisms in LiFePO4 cathodes for Li-ion batteries10.1149/2.001111jes ↗
46. Model prediction and experiments for the electrode design optimization of LiFePO 4/graphite electrodes in high capacity lithium-ion batteries10.5012/bkcs.2013.34.1.79 ↗
47. Jow · 2014
48. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
49. A multi scale multi-dimensional thermo electrochemical modelling of high capacity lithium-ion cells10.1016/j.jpowsour.2014.01.030 ↗
50. Structural and kinetic characterization of lithium intercalation into carbon anodes for secondary lithium batteries10.1149/1.2044017 ↗
51. Electrochemical analysis of lithiated graphite anodes10.1149/1.1553788 ↗
52. Analysis of lithium deinsertion/insertion in LiyFePO4 with a simple mathematical model10.1016/j.electacta.2011.03.030 ↗
53. The source of first-cycle capacity loss in LiFePO410.1016/S0378-7753(01)00633-4 ↗
54. Modeling a porous intercalation electrode with two characteristic particle sizes10.1149/1.1838166 ↗
55. (P,T) phase boundary in Li-intercalated graphite: theory and experiment10.1103/PhysRevB.29.1115 ↗
56. The mechanisms of lithium and sodium insertion in carbon materials10.1149/1.1379565 ↗
57. Thermal model for a Li-ion cell10.1149/1.2817888 ↗
58. Charge transfer kinetics at the solid–solid interface in porous electrodes10.1038/ncomms4585 ↗
59. Formation of lithium-graphite intercalation compounds in nonaqueous electrolytes and their application as a negative electrode for a lithium ion (Shuttlecock) cell10.1149/1.2220849 ↗
60. Thermodynamics and crystal structure anomalies in lithium-intercalated graphite10.1016/j.jpowsour.2005.05.087 ↗
61. A study of electrochemical kinetics of lithium ion in organic electrolytes10.1007/BF02699310 ↗
62. A meeting with Enrico Fermi10.1038/427297a ↗