The influence of pore formers on the microstructure of plasma-sprayed NiO–YSZ anodes
Source abstract
Abstract
Abstract Four types of pore formers: high-density polyethylene (HDPE), polyether-ether-ketone (PEEK), mesocarbon-microbead (MCMB) carbon powder, and baking flour, are processed and characterized, then incorporated with NiO–YSZ nano-agglomerate powder to produce plasma sprayed SOFC anode coatings. Scanning electron microscopy (SEM) of the coating microstructure, gas permeability measurements, and porosity determinations by image analysis are used to evaluate the effectiveness of each potential pore former powder. Under the spray conditions studied, the flour and MCMB pore former powders are effective as plasma sprayed pore formers, increasing the permeability of the coatings by factors of four and two, respectively, compared to a similarly sprayed NiO–YSZ coating without pore formers. The HDPE powder is unable to survive the plasma spray process and does not contribute to the final coating porosity. The PEEK pore former, though ineffective with the current powder characteristics and spray parameters, exhibits the highest relative deposition efficiency and the most favorable thermal characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Dees · J. Electrochem. Soc. · 1987 · 134 · 214110.1149/1.2100839 ↗
2. Corbin · J. Am. Ceram. Soc. · 1999 · 82 · 169310.1111/j.1151-2916.1999.tb01988.x ↗
3. Sanson · J. Eur. Ceram. Soc. · 2008 · 28 · 122110.1016/j.jeurceramsoc.2007.10.001 ↗
4. Kesler · 2003 · 539
5. Clemmer · Solid State Ionics · 2004 · 166 · 25110.1016/j.ssi.2003.12.009 ↗
6. Zhang · J. Power Sources · 2007 · 170 · 5510.1016/j.jpowsour.2007.03.080 ↗
7. Hu · J. Membrane Sci. · 2008 · 318 · 44510.1016/j.memsci.2008.03.008 ↗
8. Jasinski · Electrochem. Solid-State Lett. · 2005 · 8 · A21910.1149/1.1869153 ↗
9. Delahaye · Solid State Ionics · 2006 · 177 · 294510.1016/j.ssi.2006.08.008 ↗
10. Tai · J. Am. Ceram. Soc. · 1991 · 74 · 50110.1111/j.1151-2916.1991.tb04050.x ↗
11. Kwon · 2007
12. Weckmann · J. Thermal Spray Tech. · 2006 · 15 · 60410.1361/105996306X147289 ↗
13. Rose · 2009
14. Aggarwal · J. Therm. Anal. · 1997 · 50 · 710.1007/BF01979545 ↗
15. Yu Bolbukh · J. Thermal Anal. Calorim. · 2008 · 94 · 72710.1007/s10973-008-9362-y ↗
16. Syed · 2007 · 671
17. Grinys · Plasma Process. Polym. · 2007 · 4 · S18110.1002/ppap.200730607 ↗
18. Hwang · J. Power Sources · 2008 · 180 · 13210.1016/j.jpowsour.2008.01.075 ↗
19. Harris · J. Thermal Spray Tech. · 2010 · 19 · 32810.1007/s11666-009-9441-z ↗
20. Gui · Mater. Lett. · 2001 · 51 · 39610.1016/S0167-577X(01)00327-5 ↗