journal article·2021-12

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Bei Hu, Fushan Geng, Ming Shen, Chong Zhao, Qing Qiu, Yang Lin, Changxin Chen, Wen Wen, Shun Zheng, Xiaoshi Hu, Chao Li, Bingwen Hu

Publisher page

Abstract

Abstract LiCoO2, as a domain cathode material of Li-ion batteries, faces a great deal of challenges due to the limited cycling stability at high voltage (>4.35 V vs. Li/Li+). These issues are tentatively addressed here by a multifunctional self-stabilization modification strategy, involving trace Mg bulk doping, surface gradient Ti doping and BaTiO3 dot coating in LiCoO2. The multifunctional synergy is verified to overcome the detrimental irreversible phase transition and the growth of impedance of LiCoO2 cycling at 4.6 V. By using soft X-ray absorption spectroscopy (sXAS) and electron paramagnetic resonance (EPR) techniques, we also elucidate that Ti surface gradient doping can reinforce the structure rigidity of the particles while significantly attenuates the irreversible oxygen redox at high voltage. All these strategies promote the prolonged cyclic performance of LiCoO2 under 4.6 V high-voltage through different mechanism. This elaborate investigation provides an instructive contribution in the advancement of high-voltage LiCoO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. LixCoO2 (O<x<1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
2. Evolution of strategies for modern rechargeable batteries10.1021/ar2002705 ↗
3. Surface engineering strategies of layered LiCoO2 cathode material to realize high-energy and high-voltage Li-ion cells10.1002/aenm.201601507 ↗
4. CoO2, the end member of the LixCoO2 solid solution10.1149/1.1836594 ↗
5. Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V10.1016/j.electacta.2003.10.019 ↗
6. Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density10.1039/C8CS00322J ↗
7. Anisotropic electrical conductivity in LiCoO2 single crystal10.1006/jssc.2001.9459 ↗
8. An overview on the advances of LiCoO2 cathodes for lithium‐ion batteries
9. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
10. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
11. Phase relationships and structural and chemical stabilities of charged Li1-xCoO2-δ and Li1-xNi0.85Co0.15O2-δ cathodes10.1149/1.1525430 ↗
12. Oxygen contribution on Li-ion Intercalation−Deintercalation in LiCoO2 investigated by O K-edge and Co L-edge X-ray absorption spectroscopy10.1021/jp013735e ↗
13. Origins of capacity and voltage fading of LiCoO2 upon high voltage cycling10.1039/C9TA06579B ↗
14. Effect of Mg-doping on the structural and electronic properties of LiCoO2: a first-principles investigation10.1016/j.jpowsour.2007.07.005 ↗
15. Electronic conductivity of LiCoO2 and its enhancement by magnesium doping10.1149/1.1837976 ↗
16. Synthesis of LiCo0.94Mg0.06O2: a promising material with high dielectric and microwave absorption performance10.1007/s10854-019-01949-y ↗
17. Mg-pillared LiCoO2: towards stable cycling at 4.6 V
18. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V10.1038/s41560-019-0409-z ↗
19. Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries10.1038/s41467-018-07296-6 ↗
20. A novel bifunctional self‐stabilized strategy enabling 4.6 V LiCoO2 with excellent long‐term cyclability and high‐rate capability10.1002/advs.201900355 ↗
21. Reversible phase transition enabled by binary Ba and Ti-based surface modification for high voltage LiCoO2 cathode10.1016/j.jpowsour.2019.226954 ↗
22. Hierarchical defect engineering for LiCoO2 through low-solubility trace element doping
23. First-principles investigation of phase stability in LixCoO210.1103/PhysRevB.58.2975 ↗
24. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
25. First-principles evidence for stage ordering in LixCoO210.1149/1.1838610 ↗
26. The stability of P2-layered sodium transition metal oxides in ambient atmospheres10.1038/s41467-020-17290-6 ↗
27. Achieving stable cycling of LiCoO2 at 4.6 V by multilayer surface modification
28. Electrode-electrolyte interface in Li-ion batteries: current understanding and new insights10.1021/acs.jpclett.5b01727 ↗
29. Enhancement of ultrahigh rate chargeability by interfacial nanodot BaTiO3 treatment on LiCoO2 cathode thin film batteries10.1021/acs.nanolett.8b04690 ↗
30. Charge compensation and capacity fading in LiCoO2 at high voltage investigated by soft x-ray absorption spectroscopy10.1088/1674-1056/27/10/107802 ↗
31. Charge compensation mechanisms in Li1.16Ni0.15Co0.19Mn0.50O2 positive electrode material for Li-ion batteries analyzed by a combination of hard and soft X-ray absorption near edge structure10.1016/j.jpowsour.2012.08.023 ↗
32. Retarding phase transformation during cycling in a lithium‐ and manganese‐rich cathode material by optimizing synthesis conditions10.1002/celc.201801739 ↗
33. Molecular orbital principles of oxygen-redox battery electrodes10.1021/acsami.7b09835 ↗
34. Electronic structure of LiCoO2 surfaces and effect of Al substitution10.1021/acs.jpcc.8b11661 ↗
35. Oxygen contribution on Li-ion Intercalation−Deintercalation in LiCoO2 investigated by O K-edge and Co L-edge X-ray absorption spectroscopy10.1021/jp013735e ↗
36. Gradient-morph LiCoO2 single crystals with stabilized energy density above 3400 W h L-110.1039/D0EE00231C ↗
37. A surface Se‐substituted LiCo[O2−δSeδ] cathode with ultrastable high‐voltage cycling in pouch full‐cells10.1002/adma.202005182 ↗
38. An investigation of silicon-doped LiCoO2 as cathode in lithium-ion secondary batteries10.1016/j.ssi.2005.11.009 ↗
39. Surface doping to enhance structural integrity and performance of Li-rich layered oxide10.1002/aenm.201802105 ↗
40. Direct observation of reversible oxygen anion redox reaction in Li-rich manganese oxide, Li2MnO3, studied by soft X-ray absorption spectroscopy10.1039/C6TA00174B ↗
41. Direct observation of reversible charge compensation by oxygen ion in Li-rich manganese layered oxide positive electrode material, Li1.16Ni0.15Co0.19Mn0.50O210.1016/j.jpowsour.2014.11.104 ↗
42. EPR study of Ni3+-doped ACoO2 (A=H, Li) powders10.1016/0022-3697(92)90179-H ↗
43. X-ray diffraction, EPR, and 6Li and 27Al MAS NMR study of LiAlO2-LiCoO2 solid solutions10.1021/ic9707220 ↗
44. In operando EPR investigation of redox mechanisms in LiCoO210.1016/j.cplett.2018.12.022 ↗
45. Unraveling the critical role of Ti substitution in P2 -NaxLiyMn1–yO2 cathodes for highly reversible oxygen redox chemistry10.1021/acs.chemmater.9b03765 ↗
46. Anionic redox in Na-based layered oxide cathodes: a review with focus on mechanism studies10.1016/j.mtener.2020.100474 ↗
47. The origin of heavy element doping to relieve the lattice thermal vibration of layered materials for high energy density Li ion cathodes10.1039/D0TA03979A ↗
48. In situ FT-IR investigation on the reaction mechanism of visible light photocatalytic NO oxidation with defective g-C3N410.1016/j.scib.2017.12.013 ↗
49. Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: the capacity decay mechanism and Al2O3 surface modification10.1016/j.nanoen.2016.06.026 ↗