Paper-based thermoelectric generator based on multi-walled carbon nanotube/carboxylated nanocellulose
Source abstract
Abstract
Abstract Cellulose is the most abundant polymer material in nature. After being produced on the nanometer scale, it is widely used in research on flexible energy storage equipment and power supply equipment. Therefore, this study has prepared a nanocomposite thermoelectric material based on multi-walled carbon nanotube (MWCNT) and carboxylated nanocellulose fiber (C-CNF) and obtained a free-standing paper-based thermoelectric generator (TEG) through a simple printing method. The equipment exhibits excellent mechanical flexibility. At the same time, the thermal conductivity is significantly reduced under the dual effects of paper and C-CNF (is reduced to 0.02–0.09 W/mK). The TEG prototype has four P-shaped feet. Under a temperature gradient of 70 K, the open circuit voltage is 3.3 mV, and the output power is up to 3.7 nW. This work not only confirms the improvement of MWCNT thermoelectric performance by C-CNF but also provides a new strategy for the preparation of low-cost and environmentally friendly thermoelectric generators.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
2. Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips10.1039/c3ee23729j ↗
3. High thermoelectric power factor of a diketopyrrolopyrrole-based low bandgap polymer via finely tuned doping engineering
4. Elastic and wearable wire-shaped lithium-ion battery with high electrochemical performance10.1002/anie.201402388 ↗
5. Wearable textile battery rechargeable by solar energy10.1021/nl403860k ↗
6. Heat shrink formation of a corrugated thin film thermoelectric generator10.1016/j.enconman.2015.07.016 ↗
7. Fabrication of flexible thermoelectric thin film devices by inkjet printing10.1002/smll.201303126 ↗
8. Flexible cellulose-based thermoelectric sponge towards wearable pressure sensor and energy harvesting10.1016/j.cej.2017.12.134 ↗
9. Heat-sink-free flexible organic thermoelectric generator vertically operating with chevron structure10.1002/admt.201700335 ↗
10. Enhanced thermoelectric performance of bar-coated SWCNT/P3HT thin films10.1021/acsami.5b00626 ↗
11. Large-scale integration of flexible materials into rolled and corrugated thermoelectric modules10.1002/app.44208 ↗
12. Paper thermoelectrics: merging nanotechnology with naturally abundant fibrous material10.1021/acsami.6b05843 ↗
13. Cellulose fiber-based hierarchical porous bismuth telluride for high-performance flexible and tailorable thermoelectrics10.1021/acsami.7b16356 ↗
14. A paper-based electrode using a graphene dot/PEDOT:PSS composite for flexible solar cells10.1016/j.nanoen.2017.04.044 ↗
15. Conductive polymers for thermoelectric power generation10.1016/j.pmatsci.2017.09.004 ↗
16. Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects10.1016/j.enconman.2016.01.065 ↗
17. All-Organic textile thermoelectrics with carbon-nanotube-coated n-type yarns10.1021/acsaem.8b00617 ↗
18. Advances in carbon nanotube n-type doping: methods, analysis and applications10.1016/j.carbon.2017.09.107 ↗
19. Flexible carbon nanotube papers with improved thermoelectric properties10.1039/C1EE01931G ↗
20. Highly conducting carbon nanotube/polyethyleneimine composite fibers10.1002/adma.200401648 ↗
21. High-performance and compact-designed flexible thermoelectric modules enabled by a reticulate carbon nanotube architecture
22. Fabrication of core-shell structured poly(3,4-ethylenedioxythiophene)/carbon nanotube hybrid with enhanced thermoelectric power factors10.1016/j.carbon.2019.03.088 ↗
23. Simultaneous enhancement of electrical conductivity and seebeck coefficient in organic thermoelectric SWNT/PEDOT:PSS nanocomposites10.1016/j.carbon.2019.04.007 ↗
24. Spray doping method to create a low-profile high-density carbon nanotube thermoelectric generator10.1016/j.carbon.2015.09.029 ↗
25. Carbon nanotube/cellulose acetate thermoelectric papers10.1021/acssuschemeng.8b03670 ↗
26. Free-standing flexible multiwalled carbon nanotubes paper for wearable thermoelectric power generator10.1016/j.jpowsour.2019.227493 ↗
27. Cellulose: fascinating biopolymer and sustainable raw material10.1002/anie.200460587 ↗
28. Aerocellulose: aerogels and aerogel‐like materials made from cellulose10.1002/masy.200651212 ↗
29. Fire-resistant inorganic analogous xuan paper with thousands of years' super-durability10.1021/acssuschemeng.8b04630 ↗
30. Fabrication of transparent paper-based flexible thermoelectric generator for wearable energy harvester using modified distributor printing technology10.1021/acsami.8b21716 ↗
31. A honeycomb-like paper-based thermoelectric generator based on a Bi2Te3/bacterial cellulose nanofiber coating10.1039/C9NR06197E ↗
32. Flexible cellulose nanofiber/Bi2Te3 composite film for wearable thermoelectric devices10.1016/j.jpowsour.2020.229044 ↗
33. Cellulose-carbon nanotube composite aerogels as novel thermoelectric materials10.1016/j.compscitech.2018.04.026 ↗
34. Supercapacitance from cellulose and carbon nanotube nanocomposite fibers10.1021/am403622v ↗
35. Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting10.1038/s41563-019-0315-6 ↗
36. Recent advances on multi-component hybrid nanostructures for electrochemical capacitors - ScienceDirect10.1016/j.jpowsour.2015.06.062 ↗