Modification of LiNi0.8Co0.1Mn0.1O2 cathode materials from the perspective of chemical stabilization and kinetic hindrance
Source abstract
Abstract
Abstract Nickel-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) with layered crystal structure is regarded as a promising positive electrode material for lithium-ion batteries due to its relatively high specific capacity, outstanding rate performance, and remarkable cycle stability. Nevertheless, the challenges such as capacity attenuation and voltage decline have seriously hindered its large-scale applications. Significantly, the thermodynamic instability of the H3 phase inevitably triggers undesirable cationic disordering and oxygen evolution reaction, which further induce a series of problems. Herein, we have systematically reviewed the research progress of NCM811 from the perspective of chemical stabilization of lattice structure and kinetic hindrance of cathode-electrolyte interface, and summarized the relationship between performance fading mechanism and corresponding strategies. Moreover, new ideas for further modification of ameliorating crystal structure stability and further improvement of NCM811 electrochemical properties are provided, which shines a light on the development of Ni-rich materials in LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Advanced materials for energy storage10.1002/adma.200903328 ↗
4. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
5. A short review on layered LiNi0.8Co0.1Mn0.1O2 positive electrode material for lithium-ion batteries10.1016/j.egypro.2017.03.672 ↗
6. Requirement of high lithium content in Ni-rich layered oxide material for Li ion batteries10.1016/j.jallcom.2018.06.135 ↗
7. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
8. Li-O-2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
9. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
10. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
11. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
12. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
13. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
14. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
15. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
16. Lithium-ion full cell with high energy density using nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode and SiO−C composite anode10.1007/s12613-018-1702-8 ↗
17. Recent progress on lithium-ion batteries with high electrochemical performance10.1007/s11426-018-9410-0 ↗
18. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
19. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
20. Recent advances in the electrolytes for interfacial stability of high-voltage cathodes in lithium-ion batteries10.1039/C4RA11575A ↗
21. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
22. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
23. Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries10.1016/j.jpowsour.2018.10.094 ↗
24. Charge-transfer-induced lattice collapse in Ni-rich NCM cathode materials during delithiation10.1021/acs.jpcc.7b06598 ↗
25. Anisotropic lattice strain and mechanical degradation of high- and low-nickel NCM cathode materials for Li-ion batteries10.1021/acs.jpcc.6b12885 ↗
26. From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries10.1002/aenm.201701682 ↗
27. Complementary effects of Mg and Cu incorporation in stabilizing the cobalt-free LiNiO2 cathode for lithium-ion batteries10.1021/acsami.0c11413 ↗
28. Fehse · 2020
29. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
30. Reaction mechanism and kinetics analysis of lithium nickel oxide during solid-state reaction10.1039/a909130k ↗
31. Layered lithium insertion material of LiNi1/2Mn1/2O2: a possible alternative to LiCoO2 for advanced lithium-ion batteries10.1246/cl.2001.744 ↗
32. TEM study of electrochemical cycling-induced damage and disorder in LiCoO2 cathodes for rechargeable lithium batteries10.1149/1.1391631 ↗
33. An effective doping strategy to improve the cyclic stability and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode
34. Unanticipated mechanism of the trimethylsilyl motif in electrolyte additives on nickel-rich cathodes in lithium-ion batteries10.1021/acsami.0c11996 ↗
35. Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes10.1016/j.jpowsour.2020.228552 ↗
36. Assembly of MXene/PP separator and its enhancement for Ni-rich LiNi0.8Co0.1Mn0.1O2 electrochemical performance
37. Ag-Sn dual-modified LiNi0.8Co0.1Mn0.1O2 as cathode for lithium storage10.1016/j.jallcom.2020.156763 ↗
38. Recent progress in coatings and methods of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials: a short review10.1016/j.ceramint.2020.06.091 ↗
39. High performance of phosphorus and fluorine co-doped LiNi0.8Co0.1Mn0.1O2 as a cathode material for lithium ion batteries
40. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
41. Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries10.1016/S0378-7753(03)00173-3 ↗
42. Materials for electrochemical capacitors10.1038/nmat2297 ↗
43. Lithium batteries and cathode materials10.1021/cr020731c ↗
44. Consequences of long-term water exposure for bulk crystal structure and surface composition/chemistry of nickel-rich layered oxide materials for Li-ion batteries10.1016/j.jpowsour.2020.228370 ↗
45. Structural transformation of LiNi0.8Co0.1Mn0.1O2 cathode material during cycling with overcharge investigated by in situ X-ray diffraction10.1007/s11664-019-07489-9 ↗
46. Understanding of performance degradation of LiNi0.80Co0.10Mn0.10O2 cathode material operating at high potentials10.1016/j.jechem.2019.05.013 ↗
47. Comparison of the structural and electrochemical properties of layered LiNixCoyMnzO2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
48. Oxygen release and its effect on the cycling stability of LiNixMnyCozO2 (NMC) cathode materials for Li-ion batteries10.1149/2.0021707jes ↗
49. Overcoming the chemical instability on exposure to air of Ni-rich layered oxide cathodes by coating with spinel LiMn1.9Al0.1O410.1039/C6TA01061J ↗
50. Effect of residual lithium compounds on layer Ni-rich LiNi0.7Mn0.3O210.1149/2.042406jes ↗
51. Effects of CO2 in air on Li deintercalation from LiNi1-x-yCoxAlyO210.1016/S0378-7753(99)00216-5 ↗
52. Surface modification of poly(vinylidene fluoride) by alkaline treatment 1. The degradation mechanism10.1016/S0032-3861(99)00343-2 ↗
53. Controlling residual lithium in high-nickel (>90 %) lithium layered oxides for cathodes in lithium-ion batteries
54. A first-principles approach to studying the thermal stability of oxide cathode materials10.1021/cm0620943 ↗
55. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗
56. Improved rate and cyclic performance of potassium-doped nickel-rich ternary cathode material for lithium-ion batteries10.1007/s10853-020-05306-x ↗
57. Chemical trends in the lattice thermal conductivity of Li(Ni, Mn, Co)O2 (NMC) battery cathodes10.1021/acs.chemmater.0c02908 ↗
58. Lithium nickel cobalt manganese oxide synthesized using alkali chloride flux: morphology and performance as a cathode material for lithium ion batteries10.1021/am300386j ↗
59. Degradation mechanism of Ni-enriched NCA cathode for lithium batteries: are microcracks really critical?10.1021/acsenergylett.9b00733 ↗
60. Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability10.1016/j.nanoen.2019.02.027 ↗
61. Structural stability of LiNiO2 cycled above 4.2 V10.1021/acsenergylett.7b00304 ↗
62. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
63. Origin of structural degradation during cycling and low thermal stability of Ni-rich layered transition metal-based electrode materials10.1021/acs.jpcc.7b06122 ↗
64. Unraveling the origin of instability in Ni-rich LiNi1-2xCoxMnxO2 (NCM) cathode materials10.1021/acs.jpcc.6b00369 ↗
65. The role of oxygen release from Li- and Mn-rich layered oxides during the first cycles investigated by on-line electrochemical mass spectrometry10.1149/2.1001702jes ↗
66. Singlet oxygen evolution from layered transition metal oxide cathode materials and its implications for lithium-ion batteries10.1016/j.mattod.2018.03.037 ↗
67. Critical grain size for microcracking during lithium insertion10.1016/S0378-7753(99)00052-X ↗
68. A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: challenges and recommendations10.1016/j.rser.2017.05.001 ↗
69. Recovery of lithium and leaching behavior of NCM powder by carbon reductive treatment from Li(NCM)O2 system secondary battery scraps
70. Washing of nickel-rich cathode materials for lithium-ion batteries: towards a mechanistic understanding10.1149/2.1351915jes ↗
71. A mild surface washing method using protonated polyaniline for Ni-rich LiNi0.8Co0.1Mn0.1O2 material of lithium ion batteries10.1016/j.electacta.2017.07.169 ↗
72. Positive electrode materials for Li-Ion and Li-batteries10.1021/cm902696j ↗
73. Recent advances in Ni-rich layered oxide particle materials for lithium-ion batteries10.1016/j.partic.2020.09.004 ↗
74. Dual-site lattice modification regulated cationic ordering for Ni-rich cathode towards boosted structural integrity and cycle stability10.1016/j.cej.2020.126314 ↗
75. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
76. Enhancing structural stability unto 4.5 V of Ni-rich cathodes by tungsten-doping for lithium storage10.1016/j.jpowsour.2019.03.072 ↗
77. A facile method to enhance electrochemical performance of high-nickel cathode material Li(Ni0.8Co0.1Mn0.1)O2 via Ti doping10.1007/s10854-018-9093-1 ↗
78. Nb-doping in LiNi0.8Co0.1Mn0.1O2 cathode material: effect on the cycling stability and voltage decay at high rates10.1016/j.jtice.2019.02.006 ↗
79. Improving the cycling stability of Ni-rich cathode materials by fabricating surface rock salt phase10.1016/j.electacta.2018.09.158 ↗
80. Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation10.1016/j.electacta.2018.08.124 ↗
81. [Ni0.78Co0.1Mn0.1Al0.02]O2 for high performance of lithium ion batteries10.1016/j.ceramint.2018.12.196 ↗
82. Improved electrochemical performance of cathode material LiNi0.8Co0.1Mn0.1O2 by doping magnesium via co-precipitation method10.1007/s10854-019-01062-0 ↗
83. Effect of fluorine on the electrochemical performance of spherical LiNi0.8Co0.1Mn0.1O2 cathode materials via a low temperature method10.1016/j.powtec.2012.12.061 ↗
84. Improved cyclic stability of LiNi0.8Co0.1Mn0.1O2 via Ti substitution with a cut-off potential of 4.5V10.1016/j.ceramint.2015.02.026 ↗
85. Improved stability of Ni-rich cathode by the substitutive cations with stronger bonds10.1016/j.electacta.2018.01.119 ↗
86. Characterization of multiple metals (Cr, Mg) substituted LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium ion battery10.1016/j.jallcom.2012.01.004 ↗
87. Nanostructured high-energy cathode materials for advanced lithium batteries10.1038/nmat3435 ↗
88. Nanostructured high-energy cathode materials for advanced lithium batteries10.1038/nmat3435 ↗
89. Synthesis of full concentration gradient cathode studied by high energy X-ray diffraction10.1016/j.nanoen.2015.07.019 ↗
90. Full-gradient structured LiNi0.8Co0.1Mn0.1O2 cathode material with improved rate and cycle performance for lithium ion batteries10.1016/j.electacta.2019.04.058 ↗
91. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode via wet-chemical coating of MgO10.1007/s10008-019-04308-3 ↗
92. Improved electrochemical performances of LiNi0.8Co0.1Mn0.1O2 cathode via SiO2 coating10.1016/j.jallcom.2019.03.308 ↗
93. Ultrathin-Y2O3-coated LiNi0.8Co0.1Mn0.1O2 as cathode materials for Li-ion batteries: synthesis, performance and reversibility10.1016/j.ceramint.2018.09.227 ↗
94. Surface modification of LiNi0.8Co0.1Mn0.1O2 by WO3 as a cathode material for LIB10.1016/j.apsusc.2019.03.116 ↗
95. Providing A long-term protection for NCM811 cathode material by Al2O3 coating layer10.1088/1757-899X/735/1/012007 ↗
96. Optimizing Li2O-2B2O3 coating layer on LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material for high-performance lithium-ion batteries10.1080/15435075.2020.1763362 ↗
97. Modification of Ni-rich FCG NMC and NCA cathodes by atomic layer deposition: preventing surface phase transitions for high-voltage lithium-ion batteries10.1038/srep26532 ↗
98. Enhanced electrochemical performance of Li3PO4 modified Li[Ni0.8Co0.1Mn0.1]O2 cathode material via lithium-reactive coating10.1016/j.jallcom.2018.09.237 ↗
99. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials via Li4P2O7 surface modification for Li-ion batteries10.1016/j.ceramint.2018.05.024 ↗
100. An effective etching-induced coating strategy to shield LiNi0.8Co0.1Mn0.1O2 electrode materials by LiAlO210.1016/j.jpowsour.2018.11.062 ↗