Carbon coated Li3VO4 microsphere: Ultrafast solvothermal synthesis and excellent performance as lithium-ion battery anode
Source abstract
Abstract
Abstract Li3VO4 is a promising anode material for next-generation lithium ion batteries. However, inferior electronic conductivity and cumbersomely preparing route limit its further development. Herein, we prepared Li3VO4 microspheres with average diameter of 1.8 μm by solvothermal route in only 10 min. When used as anode material for the lithium ion battery, the uniform microspheres of Li3VO4 delivered a discharge capacity of 233 mA h g−1 after 1000 cycles at 4 A g−1. Even at a high rate of 10 A g−1, a discharge capacity of 152 mA h g−1 was achieved. Detail microstructure and electrochemical characterization demonstrates that the excellent performance of as-prepared anode originates from the uniform microsphere morphology and the presence of ~2 nm carbon substance on the surface of microsphere. More importantly, when Li3VO4 microsphere anode packages into full cell with commercial LiFePO4, three cells in series steadily light three red LEDs, implying an outstanding potential of Li3VO4 microsphere anode for practical application in lithium ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
2. Extra storage capacity in transition metal oxide lithium-ion batteries revealed by in situ magnetometry
3. A disordered rock salt anode for fast-charging lithium-ion batteries10.1038/s41586-020-2637-6 ↗
4. Rich atomic interfaces between sub-1 nm RuOx clusters and porous Co3O4 nanosheets boost oxygen electrocatalysis bifunctionality for advanced Zn-air batteries10.1016/j.ensm.2020.06.015 ↗
5. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries
6. Facile synthesis of Fe4N/Fe2O3/Fe porous N-doped carbon nanosheet as high-performance anode for lithium-ion batteries10.1016/j.jpowsour.2018.02.071 ↗
7. Identifying the components of the solid-electrolyte interphase in Li-ion batteries10.1038/s41557-019-0304-z ↗
8. Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques10.1039/D0EE01694B ↗
9. Tuning shell thickness of MnO/C core-shell nanowires for optimum performance of lithium-ion batteries10.1007/s40242-017-7223-6 ↗
10. High-performance metal-organic framework-perovskite hybrid as an important component of the air-electrode for rechargeable Zn-air battery10.1016/j.jpowsour.2020.228377 ↗
11. Boosting the deep discharging/charging lithium storage performances of Li3VO4 through double-carbon decoration10.1021/acsami.8b08483 ↗
12. Three-dimensional porous hierarchically architectured Li3VO4 anode materials for high-performance lithium-ion batteries
13. Li3VO4 nanoparticles in N-doped carbon with porous structure as an advanced anode material for lithium-ion batteries10.1016/j.cej.2019.03.167 ↗
14. Niobium-based oxide anodes toward fast and safe energy storage: a review
15. In-situ implanted carbon nanofilms into lithium titanate with 3D porous structure as fast kinetics anode for high-performance dual-ion battery10.1016/j.cej.2020.125834 ↗
16. Carbon-coated Li3VO4 spheres as constituents of an advanced anode material for high-rate long-life lithium-ion batteries10.1002/adma.201701571 ↗
17. Si-doping mediated phase control from β- to γ-form Li3VO4 toward smoothing Li insertion/extraction10.1002/aenm.201701621 ↗
18. Partial surface phase transformation of Li3VO4 that enables superior rate performance and fast lithium-ion storage10.1007/s42864-019-00028-3 ↗
19. Morphology inheritance synthesis of carbon-coated Li3VO4 rods as anode for lithium-ion battery10.1007/s40843-019-9424-9 ↗
20. A safe and fast-charging lithium-ion battery anode using MXene supported Li3VO410.1039/C9TA02037C ↗
21. Nanoporous TiNb2O7/C composite microspheres with three-dimensional conductive network for long-cycle-life and high-rate capability anode materials for lithium-ion batteries10.1021/acsami.7b13246 ↗
22. Li3VO4: a promising insertion anode material for lithium‐ion batteries10.1002/aenm.201200833 ↗
23. Synthesis of carbon-coated Li3VO4 and its high electrochemical performance as anode material for lithium-ion batteries10.1016/j.jpowsour.2013.12.019 ↗
24. One-pot synthesis of Li3VO4@C nanofibers by electrospinning with enhanced electrochemical performance for lithium-ion batteries10.1016/j.scib.2017.07.001 ↗
25. Peapod-like Li3VO4/N-doped carbon nanowires with pseudocapacitive properties as advanced materials for high-energy lithium-ion capacitors10.1002/adma.201700142 ↗
26. A unique hollow Li3VO4/carbon nanotube composite anode for high rate long-life lithium-ion batteries10.1039/C4NR03119A ↗
27. Effect of different solvent ratios (Water/Ethylene glycol) on the growth process of CaMoO4 crystals and their optical properties10.1021/cg100584b ↗
28. Surface charge‐driven nanoengineering of monodisperse carbon nanospheres with tunable surface roughness
29. Well-dispersed Na3V2(PO4)2F3@rGO with improved kinetics for high-power sodium-ion batteries10.1039/D0TA00130A ↗
30. Solvent effect on synthesis of indium tin oxide nano-powders by a solvothermal process10.1016/j.jeurceramsoc.2004.08.022 ↗
31. Microwave-assisted synthesis and characterization of SrMoO4 and SrWO4 nanocrystals10.1007/s11051-009-9797-5 ↗
32. A robust strategy for crafting monodisperse Li4Ti5O12 nanospheres as superior rate anode for lithium ion batteries10.1016/j.nanoen.2016.01.005 ↗
33. Pristine surface investigation of Li1.2Mn0.54Ni0.13Co0.13O2 towards improving capacity and rate-capability for lithium-ion batteries10.1016/j.electacta.2017.05.091 ↗
34. Facile synthesis of carbon-coated Li3VO4 anode material and its application in full cells10.1002/ente.201800186 ↗
35. Hierarchically porous Li3VO4/C nanocomposite as an advanced anode material for high-performance lithium-ion capacitors10.1016/j.jpowsour.2018.03.007 ↗
36. F doped Li3VO4: an advanced anode material with optimized rate capability and durable lifetime10.1016/j.electacta.2020.136655 ↗
37. Morphology controlled lithium storage in Li3VO4 anodes10.1039/C7TA09023D ↗
38. In situ synthesis of Mn3O4 nanoparticles on hollow carbon nanofiber as high-performance lithium-ion battery anode10.1002/chem.201801196 ↗
39. Fast synthesis of Co1.8V1.2O4/rGO as a high-rate anode material for lithium-ion batteries10.1039/C8CC03239D ↗
40. Enhancing the performance of Li3VO4 by combining nanotechnology and surface carbon coating for lithium ion batteries10.1039/C5TA02094H ↗
41. In situ synthesis of V2O3 nanorods anchored on reduced graphene oxide as high‐performance lithium ion battery anode10.1002/slct.201802730 ↗
42. Manganese oxide/carbon yolk-shell nanorod anodes for high capacity lithium batteries10.1021/nl504427d ↗
43. Hollow-cuboid Li3VO4/C as high-performance anodes for lithium-ion batteries10.1021/acsami.5b09810 ↗
44. A hierarchical structure of carbon-coated Li3VO4 nanoparticles embedded in expanded graphite for high performance lithium ion battery10.1016/j.jpowsour.2015.11.015 ↗
45. Fast and reversible Li ion insertion in carbon-encapsulated Li3VO4 as anode for lithium-ion battery10.1002/adfm.201500644 ↗
46. Encapsulated Li3VO4/carbon with a continuous conductive carbon framework as an anode for high‐performance lithium‐ion batteries10.1002/celc.202000949 ↗
47. Heterogeneous nucleation of Li3VO4 regulated in dense graphene aerogel for lithium ion capacitors10.1016/j.jpowsour.2020.228364 ↗
48. Computational investigation of Li insertion in Li3VO410.1021/acs.chemmater.6b01519 ↗
49. MoSe2 nanosheets embedded in nitrogen/phosphorus Co-doped carbon/graphene composite anodes for Ultrafast sodium storage10.1016/j.jpowsour.2020.228660 ↗
50. Lithiated bimetallic oxide, Li3Fe(MoO4)3, as a high-performance anode material for lithium-ion batteries and its multielectron reaction mechanism10.1016/j.jpowsour.2020.228656 ↗
51. Reconstructing the surface structure of Li-rich cathodes for high-energy lithium-ion batteries10.1021/acsami.9b02827 ↗
52. A cation/anion Co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries10.1016/j.nanoen.2019.01.080 ↗
53. Enhancing the rate performance of a Li3VO4 anode through Cu doping10.1002/celc.201701172 ↗
54. Organic-inorganic-induced polymer intercalation into layered composites for aqueous zinc-ion battery10.1016/j.chempr.2020.02.001 ↗
55. Micron-sized nanoporous vanadium pentoxide arrays for high-performance gel zinc-ion batteries and potassium batteries10.1021/acs.chemmater.0c00787 ↗
56. Boosting zinc-ion storage capability by effectively suppressing vanadium dissolution based on robust layered barium vanadate10.1021/acs.nanolett.0c00732 ↗
57. 2D amorphous V2O5/graphene heterostructures for high‐safety aqueous Zn‐ion batteries with unprecedented capacity and ultrahigh rate capability
58. Monolayer InP3 as A reversible anode material for Ultrafast charging lithium- and sodium-ion batteries: a theoretical study10.1039/C7TA10248H ↗
59. Fiber-in-Tube design of Co9S8-carbon/Co9S8: enabling efficient sodium storage10.1002/anie.201900076 ↗
60. The fabrication of Li3VO4/Ni composite material and its electrochemical performance as anode for Li-ion battery10.1016/j.electacta.2014.03.120 ↗
61. Enhancing the performance of Li3VO4 by combining nanotechnology and surface carbon coating for lithium ion batteries10.1039/C5TA02094H ↗
62. Superior electrochemical performance of Li3VO4/NiO/Ni electrode via a coordinated electrochemical reconstruction10.1016/j.jpowsour.2015.05.015 ↗
63. Superior electrochemical performance of Li3VO4/N-doped C as an anode for Li-ion batteries10.1039/C5TA04402B ↗
64. Li3VO4/N-doped graphene with high capacity and excellent cycle stability as anode for lithium ion batteries10.1016/j.jpowsour.2015.07.053 ↗
65. Constructing highly graphitized carbon-wrapped Li3VO4 nanoparticles with hierarchically porous structure as a long life and high capacity anode for lithium-ion batteries10.1021/acsami.5b05269 ↗
66. Enhanced conductivity and structure stability of Ti4+ doped Li3VO4 as anodes for lithium-ion batteries10.1021/acs.jpcc.7b08197 ↗
67. Enhanced electrochemical properties of Li3VO4 with controlled oxygen vacancies as Li-ion battery anode10.1002/chem.201700150 ↗
68. Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.10.025 ↗
69. Cell degradation in commercial LiFePO4 cells with high-power and high-energy designs10.1016/j.jpowsour.2014.02.052 ↗
70. Identify capacity fading mechanism in a commercial LiFePO4 cell10.1016/j.jpowsour.2009.05.036 ↗
71. Probing the capacity loss of Li3VO4 anode upon Li insertion and extraction10.1016/j.jpowsour.2017.02.075 ↗