Failure analysis of LiNi0·83Co0·12Mn0·05O2/graphite–SiOx pouch batteries cycled at high temperature
Source abstract
Abstract
Abstract The combination of Ni-rich layered oxide and graphite–SiOx is regarded as a high-energy-density system for the lithium-ion power batteries. It is significant to elaborate the failure mechanism of the two materials in full batteries, especially at high temperature. In this study, the failure behavior of LiNi0·83Co0·12Mn0·05O2/graphite–SiOx pouch batteries (≥50 Ah) cycled at 45 °C has been studied by using the non-destructive electrochemical methods and physico-chemical methods for the cathode and anode materials. Compared with the failure mechanism of lithium-ion batteries cycled at room temperature, it is more inclined to occur at high temperature that transition metal ions dissolve out from cathode and deposit on the anode, electrolyte decomposes, and solid electrolyte interphase grows. The resulting phenomena show that the cathode deterioration is slight, and the anode degradation is the main factor of pouch battery degradation. After failure analysis, the concentration-gradient NCM cathode and nitrile-containing electrolyte additive are assembled into the pouch batteries, and the capacity retention increases from 75.24% (pristine batteries at 280 cycles) to 83.44% (improved batteries at 1500 cycles). Therefore, we suggest that power batteries operating at high temperature should be with minimized transition metal dissolution of cathode materials and stable solid electrolyte interphase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Temperature dependence of oxygen release from LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode materials for Li-ion batteries10.1149/2.1261811jes ↗
2. Capacity fading of Ni-rich NCA cathodes: effect of microcracking extent10.1021/acsenergylett.9b02302 ↗
3. The design of a Li-ion full cell battery using a nano silicon and nano multi-layer graphene composite anode10.1016/j.jpowsour.2013.10.087 ↗
4. Silicon based lithium-ion battery anodes: a chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
5. Structural origin of overcharge-induced thermal instability of Ni-containing layered-cathodes for high-energy-density lithium batteries10.1021/cm201452q ↗
6. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
7. Investigation of changes in the surface structure of LixNi0.8Co0.15Al0.05O2 cathode materials induced by the initial charge10.1021/cm403332s ↗
8. Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries10.1039/C8EE00227D ↗
9. Layered oxide cathodes for Li-ion batteries: oxygen loss and vacancy evolution10.1021/acs.chemmater.9b03245 ↗
10. A high-performance ternary Si composite anode material with crystal graphite core and amorphous carbon shell10.1016/j.jpowsour.2018.03.008 ↗
11. Fundamentals and challenges of lithium ion batteries at temperatures between −40 and 60 °C
12. A mathematical model to study capacity fading in lithium ion batteries: formation and dissolution reactions10.1149/2.0221504jes ↗
13. A novel polymer electrolyte with improved high-temperature tolerance up to 170 oC for high-temperature lithium-ion batteries10.1016/j.jpowsour.2013.01.148 ↗
14. Facile Mn surface doping of Ni-rich layered cathode materials for lithium ion batteries10.1021/acsami.8b13766 ↗
15. Improving the long-term cycling performance of lithium-ion batteries at elevated temperature with electrolyte additives10.1016/j.jpowsour.2015.04.070 ↗
16. Impact of temperature and discharge rate on the aging of a LiCoO2/LiNi0.8Co0.15Al0.05O2 lithium-ion pouch cell10.1149/2.0401707jes ↗
17. Aging process analysis of LiNi0.88Co0.09Al0.03O2/graphite–SiOx pouch cell10.1016/j.electacta.2018.07.224 ↗
18. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles10.1038/s41560-019-0390-6 ↗
19. Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite–SiOx power batteries under high temperature and discharge cycling conditions10.1039/C7TA08703A ↗
20. High-precision differential capacity analysis of LiMn2O4/graphite cells10.1149/1.3543569 ↗
21. User-friendly differential voltage analysis freeware for the analysis of degradation mechanisms in Li-Ion batteries10.1149/2.013209jes ↗
22. Long-term low-rate cycling of LiCoO2/graphite li-ion cells at 55 oC10.1149/2.056206jes ↗
23. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries10.1039/C7TA11346C ↗
24. Temperature dependent ageing mechanisms in lithium-ion batteries – a post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
25. Review–Post-mortem analysis of aged lithium-ion batteries: disassembly methodology and physico-chemical analysis techniques10.1149/2.1211609jes ↗
26. Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries10.1038/ncomms14589 ↗
27. Influence of manganese dissolution on the degradation of surface films on edge plane graphite negative-electrodes for lithium-ion batteries10.1149/2.031207jes ↗
28. Tris (trimethylsilyl) borate as an electrolyte additive for high-voltage lithium-ion batteries using LiNi1/3Mn1/3Co1/3O2 cathode10.1016/j.jechem.2016.04.010 ↗
29. Understanding interfacial chemistry and stability for performance improvement and fade of high-energy Li-ion battery of LiNi0.5Co0.2Mn0.3O2//silicon-graphite10.1016/j.jpowsour.2015.10.089 ↗
30. Quantification on growing mass of solid electrolyte interphase and deposited Mn(II) on the silicon anode of LiMn2O4 full lithium-ion cells10.1021/acsami.9b07400 ↗
31. 3, 3’-sulfonyldipropionitrile: a novel electrolyte additive that can augment the high-voltage performance of LiNi1/3Co1/3Mn1/3O2/graphite batteries10.1016/j.jpowsour.2016.04.053 ↗
32. Acrylic acid nitrile, a film-forming electrolyte component for lithium-ion batteries, which belongs to the family of additives containing vinyl group10.1016/S0378-7753(03)00268-4 ↗
33. Constructing unique cathode interface by manipulating functional groups of electrolyte additive for graphite/LiNi0.6Co0.2Mn0.2O2 cells at high voltage10.1021/acs.jpclett.8b01099 ↗