Investigation of vanadium redox flow batteries performance through locally-resolved polarisation curves and impedance spectroscopy: Insight into the effects of electrolyte, flow field geometry and electrode thickness
Source abstract
Abstract
Abstract The inhomogeneous distribution of electrolyte over the porous electrode is one of the main issues hindering vanadium flow battery performance, limiting the system power density. Moreover, the interplay between fluid dynamics in distribution channels and morphology of porous electrodes is not well understood at local level throughout the cell active area, where local reactant starvation may occur and further limit system performance. Therefore, a systematic local characterization is fundamental to improve the understanding of system operation and to enhance system power density. This work discusses the implementation of a 10 regions macro-segmented flow battery with 25 cm2 active area, that permits the local measurement of polarisation curves and impedance spectra. Both positive and negative symmetric cells, as well as all-vanadium configuration, are adopted, combining carbon paper electrodes of different thickness with single serpentine and interdigitated distributors. The characterization evidences that single serpentine presents poor performance towards cell outlet, while interdigitated geometry is limited in the central region of active area. In most of the investigated operating conditions, single serpentine induces a more heterogeneous operation, especially if coupled with thinner electrode and positive electrolyte. Moreover, the representativeness at local level of symmetric cells compared to all-vanadium one is analysed and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
2. Redox flow batteries for the storage of renewable energy: a review10.1016/j.rser.2013.08.001 ↗
3. A novel high-energy-density positive electrolyte with multiple redox couples for redox flow batteries10.1016/j.apenergy.2014.09.076 ↗
4. Application of carbon materials in redox flow batteries10.1016/j.jpowsour.2013.12.038 ↗
5. In situ localized current distribution measurements in all-vanadium redox flow batteries10.1149/2.0241601jes ↗
6. A highly permeable and enhanced surface area carbon-cloth electrode for vanadium redox flow batteries10.1016/j.jpowsour.2016.08.085 ↗
7. Carbon felt supported carbon nanotubes catalysts composite electrode for vanadium redox flow battery application10.1016/j.jpowsour.2012.07.081 ↗
8. The influence of electrode and channel configurations on flow battery performance10.1149/2.0941409jes ↗
9. Effect of flow field on the performance of an all-vanadium redox flow battery10.1016/j.jpowsour.2016.01.048 ↗
10. An optimal strategy of electrolyte flow rate for vanadium redox flow battery10.1016/j.jpowsour.2011.11.036 ↗
11. A locally resolved investigation on direct methanol fuel cell uneven components fading: steady state and degradation local analysis10.1016/j.jpowsour.2018.07.034 ↗
12. Measurement of local current density of all-vanadium redox flow batteries10.1016/j.jpowsour.2014.06.081 ↗
13. Measurement of localized current distribution in a vanadium redox flow battery10.1149/05837.0009ecst ↗
14. Study of fl ow behavior in all-vanadium redox fl ow battery using spatially resolved voltage distribution10.1016/j.jpowsour.2017.06.039 ↗
15. In situ potential distribution measurement in an all-vanadium flow battery10.1039/c3cc42092b ↗
16. In situ potential distribution measurement and validated model for all-vanadium redox flow battery10.1149/2.0211601jes ↗
17. Barsukov · 2005
18. Electrochemical analysis of the performance loss in all vanadium redox flow batteries using different cut-off voltages10.1016/j.electacta.2016.12.043 ↗
19. Physically-based impedance modeling of the negative electrode in All-Vanadium Redox Flow Batteries: insight into mass transport issues10.1016/j.electacta.2017.07.166 ↗
20. Analysis of flow field design on vanadium redox flow battery performance: development of 3D computational fluid dynamic model and experimental validation10.1016/j.apenergy.2018.06.148 ↗