An alternative composite polymer electrolyte for high performances lithium battery
Source abstract
Abstract
A composite electrolyte consisting of polyethylene-glycol dimethyl-ether (MW 2000 g mol −1 ), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) conducting salt, lithium nitrate (LiNO 3 ) film-forming additive, and nanometric silica (SiO 2 ) filler, is herein obtained by a scalable solvent casting pathway and thoroughly investigated for application in lithium metal polymer battery. Structure and morphology of the electrolyte are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively, while its electrochemical features are revealed by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), chronoamperometry, and galvanostatic cycling tests in lithium cell. The room-temperature structure of the composite electrolyte reflects the combination into a complex of the membrane components, while its morphology appears smooth with uniform distribution of salts and ceramic. The electrolyte shows an ionic conductivity over 10 −4 S cm −1 above 40 °C promoted by repeated heating and cooling, lithium transference number ranging from 0.22 at 45 °C to 0.27 at 70 °C, low interphase resistance and polarization in lithium cell, and an electrochemical stability window extending above 4.4 V. These optimal features allow the membrane to operate in a lithium cell with LiFePO 4 cathode at 50 °C, with specific capacity exceeding 150 mAh g −1 and coulombic efficiency approaching 100% over prolonged cycling.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
2. Lithium-ion batteries for sustainable energy storage: recent advances towards new cell configurations10.1039/C7GC01328K ↗
3. Exceptional long-life performance of lithium-ion batteries using ionic liquid-based electrolytes10.1039/C6EE01295G ↗
4. Prospects and limits of energy storage in batteries10.1021/jz5026273 ↗
5. Extinction risk from climate change10.1038/nature02121 ↗
6. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
7. Recent developments in the ENEA lithium metal battery project10.1016/j.electacta.2005.02.049 ↗
8. A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles10.1038/ncomms10101 ↗
9. A multiple electrolyte concept for lithium-metal batteries10.1016/j.ssi.2017.12.012 ↗
10. Lithium metal battery using LiFe0.5Mn0.5PO4 olivine cathode and pyrrolidinium-based ionic liquid electrolyte10.1021/acsomega.8b01328 ↗
11. Recent developments of the lithium metal anode for rechargeable non-aqueous batteries10.1002/aenm.201600811 ↗
12. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
13. Safety mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.12.002 ↗
14. A gel–polymer Sn–C/LiMn0.5Fe0.5PO4 battery using a fluorine-free salt10.1021/acsami.5b05179 ↗
15. A new, safe, high-rate and high-energy polymer lithium-ion battery10.1002/adma.200900470 ↗
16. Rechargeable lithium battery using non-flammable electrolyte based on tetraethylene glycol dimethyl ether and olivine cathodes10.1016/j.jpowsour.2016.09.164 ↗
17. Glyme-based electrolytes for lithium metal batteries using insertion electrodes: an electrochemical study10.1016/j.electacta.2019.03.051 ↗
18. Comparative study of ether-based electrolytes for application in lithium-sulfur battery10.1021/acsami.5b02160 ↗
19. High capacity semi-liquid lithium sulfur cells with enhanced reversibility for application in new-generation energy storage systems10.1016/j.jpowsour.2018.11.068 ↗
20. Poly(ethylenglycol)dimethylether-lithium bis(trifluoromethanesulfonyl) imide, PEG500DME-LiTFSI, as high viscosity electrolyte for lithium ion batteries10.1016/j.jpowsour.2012.10.059 ↗
21. Polyethylene glycol dimethyl ether (PEGDME)-based electrolyte for lithium metal battery10.1016/j.jpowsour.2015.08.090 ↗
22. Phase diagrams and conductivity behavior of poly(ethylene oxide)-molten salt rubbery electrolytes10.1021/ma00103a034 ↗
23. Hot-pressed, dry, composite, PEO-based electrolyte membranes: I. Ionic conductivity characterization10.1016/S0378-7753(02)00543-8 ↗
24. Review on composite polymer electrolytes for lithium batteries10.1016/j.polymer.2006.05.069 ↗
25. A low-cost, high-energy polymer lithium-sulfur cell using a composite electrode and polyethylene oxide (PEO) electrolyte10.1007/s11581-016-1755-5 ↗
26. Electrochemical properties of a poly(ethylene carbonate)-LiTFSI electrolyte containing a pyrrolidinium-based ionic liquid10.1007/s11581-015-1370-x ↗
27. A QuaternaryPoly(ethylene carbonate)-lithium bis(trifluoromethanesulfonyl)imide-ionic liquid-silica fiber composite polymer electrolyte for lithium batteries10.1016/j.electacta.2015.03.117 ↗
28. A concentrated poly(ethylene carbonate)/poly(trimethylene carbonate) blend electrolyte for all-solid-state Li battery10.1038/s41428-019-0184-5 ↗
29. Interface properties between a lithium metal electrode and a poly(ethylene oxide) based composite polymer electrolyte
30. High performance PEO-based polymer electrolytes and their application in rechargeable lithium polymer batteries10.1007/s11581-007-0137-4 ↗
31. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries10.1039/C5TA03471J ↗
32. CrystalliCrystalline and amorphous phases in the poly(ethylene oxide)−LiCF3SO3 system10.1021/ma9812682 ↗
33. Mechanism of ion transport in PEO/LiTFSI complexes: effect of temperature, molecular weight and end groups10.1016/j.ssi.2012.09.020 ↗
34. Solid polymer electrolytes based on polyethylene oxide and lithium trifluoro- Methane sulfonate (PEO-LiCF3SO3): ionic conductivity and dielectric relaxation10.1016/j.ssi.2008.04.034 ↗
35. Ionic conductivity of plasticized(PEO)-LiCF3SO3 electrolytes10.1016/S0013-4686(97)10082-2 ↗
36. The effect of plasticizers on transport and electrochemical properties of PEO-based electrolytes for lithium rechargeable batteries10.1016/S0167-2738(02)00130-3 ↗
37. Characterization of solvent-free polymer electrolytes consisting of ternary PEO–LiTFSI–PYR14TFSI10.1149/1.2211928 ↗
38. Quaternary polyethylene oxide electrolytes containing ionic liquid for lithium polymer battery10.1149/2.0241607jes ↗
39. Highly conductive, ionic liquid-based polymer electrolytes10.1149/2.0331701jes ↗
40. Nanocomposite polymer electrolytes for lithium batteries10.1038/28818 ↗
41. Physical and chemical properties of nanocomposite polymer electrolytes10.1021/jp992307u ↗
42. Enhanced lithium battery with polyethylene oxide-based electrolyte containing silane-Al2O3 ceramic filler10.1002/cssc.201300296 ↗
43. Some insight into stability of amorphous poly(ethylene glycol) dimethyl ether polymers based on molecular dynamics simulations10.1021/jz4008855 ↗
44. Cross-linked polymer electrolyte and its application to lithium polymer battery10.1016/j.electacta.2018.11.155 ↗
45. The effect of interactions and reduction products of LiNO3, the anti-shuttle agent, in Li-S battery systems10.1149/2.0861503jes ↗
46. The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth10.1038/ncomms8436 ↗
47. Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium-sulfur batteries10.1016/j.electacta.2012.07.118 ↗
48. Electrochemical measurement of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
49. A high power Sn–C/C–LiFePO4 lithium ion battery10.1016/j.jpowsour.2012.05.102 ↗
50. A Nonlinear Least Squares Fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
51. A package for impedance/admittance data analysis10.1016/0167-2738(86)90100-1 ↗
52. Factors influencing the conductivity of crystalline polymer electrolytes10.1039/B601945E ↗
53. 2012
54. The influence of interface polarization on the determination of lithium transference numbers of salt in polyethylene oxide electrolytes10.1016/j.electacta.2013.09.138 ↗
55. High-performance solid polymer electrolytes for lithium batteries operational at ambient temperature10.1016/j.jpowsour.2015.08.035 ↗
56. Hot-pressed, solvent-free, nanocomposite, PEO-based electrolyte membranes: II. All solid-state Li/LiFePO4 polymer batteries10.1016/S0378-7753(03)00611-6 ↗
57. A long-life lithium ion battery with enhanced electrode/electrolyte interface by using an ionic liquid solution10.1002/chem.201505192 ↗
58. Multiwalled carbon nanotubes anode in lithium-ion battery with LiCoO2, Li[Ni1/3Co1/3Mn1/3]O2 , and LiFe1/4Mn1/2Co1/4PO4 cathodes10.1021/acssuschemeng.7b03395 ↗
59. A simple approach for making a viable, safe, and high-performances lithium-sulfur battery10.1016/j.jpowsour.2017.11.079 ↗
60. Solvent-free, PYR1ATFSI ionic liquid-based ternary polymer electrolyte systems. I. Electrochemical characterization10.1016/j.jpowsour.2007.07.020 ↗
61. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗
62. A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode10.1149/1.1449302 ↗
63. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
64. Lithium metal stripping/plating mechanisms studies: a metallurgical approach10.1016/j.elecom.2006.07.037 ↗
65. Composite poly(ethylene oxide)-electrolytes plasticized by N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide for lithium batteries10.1002/cssc.201300105 ↗
66. Modern generation of polymer electrolytes based on lithium conductive imidazole salts10.1016/j.jpowsour.2009.03.050 ↗
67. A composite polymer electrolyte protect layer between lithium and water stable ceramics for aqueous lithium-air batteries10.1149/2.020306jes ↗
68. Effect of plasticizers on ionic association and conductivity in the (PEO)9LiCF3SO3 system10.1021/ma9515644 ↗
69. Effect of plasticizers (EC or PC) on the ionic conductivity and thermal properties of the (PEO)9LiTf: Al2O3 nanocomposite polymer electrolyte system10.1007/s10008-008-0505-7 ↗
70. Effect of poly(ethylene oxide) on ionic conductivity and electrochemical properties of poly(vinylidenefluoride)-based polymer gel electrolytes prepared by electrospinning for lithium ion batteries10.1016/j.jpowsour.2013.05.178 ↗
71. Exploring low temperature Li+ ion conducting plastic battery electrolyte10.1007/s11581-013-0898-x ↗
72. Phase behavior and electrochemical characterization of blends of perfluoropolyether, poly(ethylene glycol), and a lithium salt10.1021/cm504228a ↗
73. Lithium polymer battery development for electric vehicle application10.1016/S0378-7753(97)02646-3 ↗
74. Electrolyte additives for lithium metal anodes and rechargeable lithium metal batteries: progress and perspectives10.1002/anie.201712702 ↗