journal article·2019-10

Fast chargeable P2–K~2/3[Ni1/3Mn2/3]O2 for potassium ion battery cathodes

Muthu Gnana Theresa Nathan, Nirmalesh Naveen, Woon Bae Park, Kee-Sun Sohn, Myoungho Pyo

Publisher page

Abstract

Abstract A novel layered P2–K~2/3[Ni1/3Mn2/3]O2 (K0·64Na0·04[Ni1/3Mn2/3]O2, KNMO) is presented as a high-performance cathode for K+-ion batteries. KNMO is prepared via an electrochemical ion-exchange of P2–Na0.64[Ni1/3Mn2/3]O2 (NNMO). During 50 charge/discharge (C/D) cycles within a P2-phase range, NNMO gradually turns to KNMO and finally reaches KNMO through a biphasic state. The as-prepared KNMO shows a P2–O2 transition at 4.65 V vs. K/K+, which implies that K+-preference in the prismatic sites of KNMO leads to the formation of O2-phases at higher voltages than that predicted from NNMO. Thanks to the retardation of the P2–O2 transition and fast diffusion during K+ extraction (0.57 × 10−11 cm2 s−1), KNMO can be quickly charged within the P2-phase region without a significant loss in discharge capacities. For example, comparable capacities of 82 and 75 mAh·g−1 during discharge (0.5C) are obtained after charging at 0.5 and 15C (2580 mA g−1), respectively. This behavior is contrasted with a significant reduction in capacities when cycled at the same C/D rates or when cycled at C/D rates of 0.5/15C, respectively. KNMO also shows excellent cyclability during fast charging, retaining a reversible capacity of 73 mAh·g−1 after 200C/D cycles (0.01 mAh·g−1·cycle−1).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. 30 Years of lithium-ion batteries10.1002/adma.201800561 ↗
2. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
3. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries
4. Li-ion batteries: basics, progress, and challenges10.1002/ese3.95 ↗
5. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
6. Recent progress in flexible non-lithium based rechargeable batteries10.1039/C8TA10258A ↗
7. Recent progress of layered transition metal oxide cathodes for sodium-ion batteries
8. Sodium intercalation chemistry in graphite10.1039/C5EE02051D ↗
9. Expanded graphite as superior anode for sodium-ion batteries10.1038/ncomms5033 ↗
10. Sodium-ion battery materials and electrochemical properties reviewed10.1002/aenm.201800079 ↗
11. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors10.1016/j.elecom.2015.09.002 ↗
12. Electrochemical intercalation of potassium into graphite10.1002/adfm.201602248 ↗
13. Reversible K+-insertion/deinsertion and concomitant Na+-redistribution in P′3-Na0.52CrO2 for high-performance potassium-ion battery cathodes10.1021/acs.chemmater.7b05329 ↗
14. An initial review of the status of electrode materials for potassium-ion batteries10.1002/aenm.201602911 ↗
15. Recent research progress in non-aqueous potassium-ion batteries10.1039/C7CP03852F ↗
16. Non-aqueous potassium-ion batteries: a review10.1016/j.coelec.2018.03.031 ↗
17. Theoretical analysis of interactions between potassium ions and organic electrolyte solvents: a comparison with lithium, sodium, and magnesium ions10.1149/2.0211702jes ↗
18. Investigation of potassium storage in layered P3-type K0.5MnO2 cathode10.1002/adma.201702480 ↗
19. P2- and P3-KxCoO2 as an electrochemical potassium intercalation host10.1039/C7CC00806F ↗
20. K-ion batteries based on a P2-type K0.6CoO2 cathode10.1002/aenm.201700098 ↗
21. Earth abundant Fe/Mn-based layered oxide interconnected nanowires for advanced K-ion full batteries10.1021/acs.nanolett.6b04611 ↗
22. Development of P3-K0.69CrO2 as an ultra-high performance cathode material for K-ion batteries10.1039/C8EE01365A ↗
23. Stoichiometric layered potassium transition metal oxide for rechargeable potassium batteries10.1021/acs.chemmater.8b03228 ↗
24. K0.67Ni0.17Co0.17Mn0.66O2: a cathode material for potassium-ion battery10.1016/j.elecom.2017.08.008 ↗
25. Recent progresses and prospects of cathode materials for non-aqueous potassium-ion batteries10.1007/s41918-018-0019-7 ↗
26. Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries10.1021/am403684z ↗
27. New insight into structural evolution in layered NaCrO2 during electrochemical sodium extraction10.1021/jp5105888 ↗
28. In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O210.1149/1.1407247 ↗
29. Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: the capacity decay mechanism and Al2O3 surface modification10.1016/j.nanoen.2016.06.026 ↗
30. P2-type Na2/3Ni1/3Mn2/3-xTixO2 as a new positive electrode for higher energy Na-ion batteries10.1039/C3CC49856E ↗
31. Electrochemical and structural study of layered P2-Type Na2/3Ni1/3Mn2/3O2 as cathode material for sodium-ion battery10.1002/asia.201403134 ↗
32. An advanced cathode for Na-ion batteries with high rate and excellent structural stability10.1039/c2cp44467d ↗
33. P2-type Na2/3Ni1/3Mn2/3O2 as a cathode material with high-rate and long-life for sodium ion storage10.1039/C8TA11927A ↗
34. A high-capacity P2 Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries with oxygen activity10.1016/j.jpowsour.2018.05.026 ↗
35. Poly-γ-glutamate binder to enhance electrode performances of P2-Na2/3Ni1/3Mn2/3O2 for Na-ion batteries10.1021/acsami.8b01362 ↗
36. Improvement of the cathode electrolyte interphase on P2-Na2/3Ni1/3Mn2/3O2 by atomic layer deposition10.1021/acsami.7b05326 ↗
37. High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3-xMgxMn2/3O2 (0 ≤ x ≤ 0.2) cathodes from diffraction, electrochemical and ab initio studies10.1039/C7EE02995K ↗
38. Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 cathode material with suppressed P2-O2 phase transition toward high-performance sodium-ion battery10.1021/acsami.8b12204 ↗
39. Non-aqueous K-ion battery based on layered K0.3MnO2 and hard carbon/carbon black10.1149/2.0921607jes ↗
40. KCrS2 cathode with considerable cyclability and high rate performance: the first K+ stoichiometric layered compound for potassium-ion batteries10.1002/smll.201803495 ↗
41. Highly stable P’3-K0.8CrO2 cathode with limited dimensional changes for potassium ion batteries10.1016/j.jpowsour.2019.05.017 ↗
42. High voltage Mg-doped Na0.67Ni0.3–xMgxMn0.7O2 (x = 0.05, 0.1) Na-ion cathodes with enhanced stability and rate capability10.1021/acs.chemmater.6b01935 ↗
43. Layered P2-type K0.65Fe0.5Mn0.5O2 microspheres as superior cathode for high-energy potassium-ion batteries10.1002/adfm.201800219 ↗
44. Insights into the effects of zinc doping on structural phase transition of P2-type sodium nickel manganese oxide cathodes for high-energy sodium ion batteries10.1021/acsami.6b06701 ↗
45. New insights into understanding the exceptional electrochemical performance of P2-type manganese-based layered oxide cathode for sodium ion batteries10.1016/j.ensm.2018.05.001 ↗
46. Ca-doped NaxCoO2 for improved cyclability in sodium ion batteries10.1016/j.jpowsour.2014.11.150 ↗
47. Two-dimensional lithium diffusion behavior and probable hybrid phase transformation kinetics in olivine lithium iron phosphate10.1038/s41467-017-01315-8 ↗
48. First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)310.1039/c4ta00230j ↗