journal article·2019-03

Characterisation of lithium-ion battery anodes fabricated via in-situ Cu6Sn5 growth on a copper current collector

Xin Fu Tan, Stuart D. McDonald, Qinfen Gu, Yuxiang Hu, Lianzhou Wang, Syo Matsumura, Tetsuro Nishimura, Kazuhiro Nogita

Publisher page

Abstract

Li-ion batteries (LIBs) are favoured in many applications due to their high energy density and good cyclic performance. However, some safety concerns remain with respect to the risk of fires and explosions with LIBs. Carbon-based anode materials in LIBs operate close to the Li metal reduction potential, therefore Li dendrites can grow during voltage fluctuations, causing short circuits which may lead to fires. The CuSn anodes has the lithiation potential at about 0.4 V vs Li/Li and therefore less prone to Li metal plating. A new manufacturing method involving direct in-situ formation of CuSn on a Cu current collector via melt-solid contact is proposed. This method combines the active material production and the anode fabrication into a single process. Lithiation and delithiation mechanisms of the anode produced are studied by in-situ synchrotron X-ray powder diffraction (XRPD) and ex-situ high voltage transmission electron microscope (HV-TEM). The in-situ XRPD study shows a reversible two-step reaction during cycling, and also reveals the differences in the reaction mechanisms at higher charge/discharge rates than those in published data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. L. Vries, Exploding Cell Phones Spur Recalls. CBS News. Last accessed: August 18, 2018. Available from: https://www.cbsnews.com/news/exploding-cell-phones-spur-recalls/.
2. CPSC, Verizon Wireless Announce Recall of Counterfeit Cell Phone Batteries. United States Consumer Product Safety Commission. Last accessed: December 4, 2017. Available from: https://www.cpsc.gov/recalls/2004/cpsc-verizon-wireless-announce-recall-of-counterfeit-cell-phone-batteries/.
3. Kyocera—Mobile Phone Batteries. Australian Competition & Consumer Commission. Last accessed: August 18, 2018. Available from: http://www.productsafety.gov.au/recall/kyocera-mobile-phone-batteries.
4. CPSC, Kyocera Wireless Corp. Announce Recall of Cell Phone Batteries. United States Consumer Product Safety Commission. Last accessed: August 18, 2018. Available from: https://www.cpsc.gov/Recalls/2004/cpsc-kyocera-wireless-corp-announce-recall-of-cell-phone-batteries.
5. Lithium-ion rechargeable batteries with LiCoO2 and carbon electrodes: the LiCoO2/C system10.1016/0167-2738(94)90411-1 ↗
6. Steiger · 2015
7. High-capacity anode materials for lithium- ion batteries: choice of elements and structures for active particles10.1002/ppsc.201300231 ↗
8. Chemical diffusion in intermediate phases in the lithium-tin system10.1016/0022-4596(80)90535-6 ↗
9. Thermodynamic study of the lithium-tin system10.1149/1.2127590 ↗
10. Sn-based intermetallic alloy anode materials for the application of lithium ion batteries10.1016/j.electacta.2015.02.057 ↗
11. The dimensionality of Sn anodes in Li-ion batteries10.1016/S1369-7021(13)70012-9 ↗
12. High capacity group-IV elements (Si, Ge, Sn) based anodes for lithium-ion batteries10.1016/j.jmat.2015.06.002 ↗
13. Ni3Sn4 electrodes for Li-ion batteries: Li-Sn alloying process and electrode/electrolyte interface phenomena10.1021/cm8006099 ↗
14. Comparison of thermal stability between lithiated Sn30Co30C40, LiSi, or Li0.81C6 and 1M LiPF6 EC:DEC electrolyte at high temperature10.1149/1.2988060 ↗
15. A novel multiphase Sn-Sb-Cu alloy electrodeposited on 3D interconnected microporous Cu current collector as negative electrode for lithium ion battery10.1007/s40553-017-0106-4 ↗
16. Characteristic performance of SnO/Sn/Cu6Sn5 three-layer anode for Li-ion battery10.1016/j.electacta.2013.07.060 ↗
17. Electrochemical performances of Sn anode electrodeposited on porous Cu foam for Li-ion batteries10.1016/j.electacta.2012.01.084 ↗
18. Electrodeposited Sn-Ni alloy film as a high capacity anode material for lithium-ion secondary batteries10.1149/1.1602331 ↗
19. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
20. Copper–tin anodes for rechargeable lithium batteries: an example of the matrix effect in an intermetallic system10.1016/S0378-7753(99)00111-1 ↗
21. Peled · 2004 · 1
22. Three-Dimensional porous copper-tin alloy electrodes for rechargeable lithium batteries10.1002/adfm.200305165 ↗
23. Mössbauer spectra as a “fingerprint” in tin–lithium compounds: applications to Li-ion batteries10.1016/j.jssc.2006.10.026 ↗
24. Tin-based materials as advanced anode materials for lithium ion batteries: a review
25. A three-dimensional tin-coated nanoporous copper for lithium-ion battery anodes10.1016/j.jpowsour.2010.12.021 ↗
26. The phase transformations and cycling performance of copper–tin alloy anode materials synthesized by sputtering10.1016/j.jallcom.2010.08.148 ↗
27. Commentary: the Materials Project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
28. Zhang · 2015
29. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
30. Wolfenstine · 2006
31. LixCu6Sn5 (0<x<13): an Intermetallic Insertion Electrode for Rechargeable Lithium Batteries10.1149/1.1390819 ↗
32. In situ X-ray study of the electrochemical reaction of Li with ηʹ-Cu6Sn510.1149/1.1393413 ↗
33. Nano-scale Cu6Sn5 anodes10.1016/S0378-7753(02)00061-7 ↗
34. Structural transformations in lithiated η'-Cu6Sn5 electrodes probed by in situ Mossbauer spectroscopy and X-ray diffraction10.1149/1.1471888 ↗
35. Solution route synthesis of dendrite Cu6Sn5 powders, anode material for lithium-ion batteries10.1007/s10853-006-0029-4 ↗
36. XPS study of electrode/electrolyte interfaces of η-Cu6Sn5 electrodes in Li-ion batteries10.1016/j.jpowsour.2007.06.043 ↗
37. High-capacity, microporous Cu6Sn5–Sn anodes for Li-ion batteries10.1149/1.3094033 ↗
38. Electrochemical properties of Cu6Sn5 alloy powders directly prepared by spray pyrolysis10.1016/j.jpowsour.2008.10.020 ↗
39. Three-dimensional Sn rich Cu6Sn5 negative electrodes for Li ion batteries10.1016/j.ijhydene.2016.03.097 ↗
40. Three-dimensional nanoporous Cu6Sn5/Cu composite from dealloying as anode for lithium ion batteries10.1016/j.micromeso.2016.11.036 ↗
41. Cyclic durable high-capacity Sn/Cu6Sn5 composite thin film anodes for lithium ion batteries prepared by electron-beam evaporation deposition10.1016/j.electacta.2008.11.021 ↗
42. Nanocolumnar structured porous Cu-Sn thin film as anode material for lithium-ion batteries10.1021/am405994b ↗
43. Cracking and phase stability in reaction layers between Sn-Cu-Ni solders and Cu substrates
44. Nickel-stabilized hexagonal (Cu,Ni)6Sn5 in Sn–Cu–Ni lead-free solder alloys10.1016/j.scriptamat.2008.03.002 ↗
45. Stabilisation of Cu6Sn5 by Ni in Sn-0.7Cu-0.05Ni lead-free solder alloys10.1016/j.intermet.2009.07.005 ↗
46. Solving key challenges in battery research using in situ synchrotron and neutron techniques10.1002/aenm.201602831 ↗
47. Growth orientations and mechanical properties of Cu6Sn5 and (Cu,Ni)6Sn5 on poly-crystalline Cu10.1016/j.jallcom.2012.04.110 ↗
48. An investigation of effects of Sb on the intermetallic formation in Sn-3.5Ag-0.7Cu solder joints10.1109/TCAPT.2005.848573 ↗
49. Growth kinetics of Cu6Sn5 intermetallic compound at liquid-solid interfaces in Cu/Sn/Cu interconnects under temperature gradient10.1038/srep13491 ↗
50. Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability10.1063/1.1839637 ↗
51. Rigaku Corporation and its Global Subsidiaries, Particle size and shape. Last accessed: 19 Feb. Available from: https://www.rigaku.com/en/applications/particle_size_shape.