Electrospun carbon nanofiber catalyst layers for polymer electrolyte membrane fuel cells: Structure and performance
Source abstract
Abstract
Abstract Carbon nanofiber-based fuel cell catalyst layers are prepared by electrospinning random and orthogonally-aligned structures using various structural and compositional parameters. Specifically, the influence of the level of fiber alignment, Platinum (Pt) loading, ionomer loading and distribution, deposition methods, and fiber support carbonization temperature on the support microstructure and fuel cell performance are studied and characterized by physicochemical methods. The effects of these controlled fabrication parameters were evaluated in-situ, specifically in the activation, ohmic, and mass transport overpotential regions. SEM/TEM observations reveals continuous fibrous conductive network formed by ionomer bridges between the fibers. It is found that ionomer/carbon of 0.158 with a thickness of ∼60 nm achieved the highest current density under normal operating conditions. Thicker ionomer layer resulted in high oxygen transport resistance, decreasing performance at high potentials. Carbon nanofiber (CNF) samples with 157 μg cm−2 Pt loading and I/C 0.158 achieve 5× higher current density compared to conventional V50 carbon black at 600 mV. Although the effect of orthogonally organized fibers is not clear, the results prove the advantage of using CNF as a catalyst support with tailorable material properties. Further process optimization may advance the CNF/Pt structure, while developing an understanding of the role of microstructure and organization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. The role of carbon in fuel cells10.1016/j.jpowsour.2006.02.054 ↗
2. Influence of carbon nanofiber properties as electrocatalyst support on the electrochemical performance for PEM fuel cells10.1016/j.ijhydene.2009.12.004 ↗
3. Carbon nanofiber-based active layers for fuel cell cathodes – preparation and characterization10.1016/j.elecom.2005.02.009 ↗
4. Support materials for PEMFC and DMFC electrocatalysts—a review10.1016/j.jpowsour.2012.02.011 ↗
5. The synthesis, characterization, and performance of carbon nanotubes and carbon nanofibres with controlled size and morphology as a catalyst support material for a polymer electrolyte membrane fuel cell10.1088/0957-4484/15/10/017 ↗
6. A review of accelerated stress tests of MEA durability in PEM fuel cells10.1016/j.ijhydene.2008.10.012 ↗
7. A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: causes, consequences, and mitigation strategies10.1016/j.jpowsour.2012.01.059 ↗
8. Instability of supported platinum nanoparticles in low-temperature fuel cells10.1007/s11244-007-9000-0 ↗
9. The triple phase boundary
10. Catalyst layer structure and operation
11. Platinum nanopaticles supported on stacked-cup carbon nanofibers as electrocatalysts for proton exchange membrane fuel cell10.1016/j.carbon.2009.11.017 ↗
12. Pt–Ru catalysts supported on carbon xerogels for PEM fuel cells10.1016/j.ijhydene.2011.12.029 ↗
13. Nanotubes, nanofibers and nanowires as supports for catalysts
14. High-performance nanofiber fuel cell electrodes10.1002/cssc.201100245 ↗
15. Effects of electrospun polyacrylonitrile-based carbon nanofibers as catalyst support in PEMFC10.1007/s10800-009-9787-4 ↗
16. High loading and monodispersed Pt nanoparticles on multiwalled carbon nanotubes for high performance proton exchange membrane fuel cells10.1016/j.jpowsour.2007.11.036 ↗
17. Carbon nanotubes reinforced electrospun polymer nanofibres
18. Ordered mesoporous carbons with controlled particle sizes as catalyst supports for direct methanol fuel cell cathodes10.1016/j.carbon.2008.08.015 ↗
19. Platinum supported on functionalized ordered mesoporous carbon as electrocatalyst for direct methanol fuel cells10.1016/j.jpowsour.2007.01.042 ↗
20. Highly efficient anode electrode materials for direct methanol fuel cell prepared with ordered and disordered arrays of carbon nanofibers10.1016/j.carbon.2005.05.041 ↗
21. 3D-ordered layers of vertically aligned carbon nanofilaments as a model approach to study electrocatalysis on nanomaterials10.1016/j.electacta.2012.03.134 ↗
22. Ko · 2014
23. Kim · 2014
24. A review on electrospinning design and nanofibre assemblies10.1088/0957-4484/17/14/R01 ↗
25. Technological advances in electrospinning of nanofibers10.1088/1468-6996/12/1/013002 ↗
26. Electrospun carbon nanofiber based catalyst support for proton exchange membrane fuel cell
27. Plasma nitriding induced growth of Pt-nanowire arrays as high performance electrocatalysts for fuel cells10.1038/srep06439 ↗
28. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
29. Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells10.1016/j.ijheatmasstransfer.2013.12.059 ↗
30. Yamashita · 2008 · vol 33 · 345
31. Analytic determination of the effective thermal conductivity of PEM fuel cell gas diffusion layers10.1016/j.jpowsour.2007.12.058 ↗
32. A novel approach to determine the in-plane thermal conductivity of gas diffusion layers in proton exchange membrane fuel cells10.1016/j.jpowsour.2010.11.151 ↗
33. Electrochemical surface area measurements of platinum- and palladium-based nanoparticles10.1016/j.elecom.2013.03.011 ↗
34. Measurement of oxygen reduction activities via the rotating disc electrode method: from Pt model surfaces to carbon-supported high surface area catalysts10.1016/j.electacta.2007.11.057 ↗
35. Characterization of high-surface-area electrocatalysts using a rotating disk electrode configuration10.1149/1.1838642 ↗
36. Synthesis and characterization of platinum nanoparticles on in situ grown carbon nanotubes based carbon paper for proton exchange membrane fuel cell cathode10.1016/j.jpowsour.2008.11.084 ↗
37. Larminie · 2001
38. Transport and electrochemical phenomena
39. Fuel cell basic chemistry, electrochemistry and thermodynamics frano barbir
40. Carbon supports for low-temperature fuel cell catalysts10.1016/j.apcatb.2008.09.030 ↗
41. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
42. Fabrication, in-situ performance, and durability of nanofiber fuel cell electrodes10.1149/2.0651501jes ↗
43. Graphene-doped electrospun nanofiber membrane electrodes and proton exchange membrane fuel cell performance10.1016/j.jpowsour.2016.07.083 ↗
44. Highly active and stable platinum catalyst supported on porous carbon nanofibers for improved performance of PEMFC10.1016/j.electacta.2015.01.134 ↗
45. Freestanding catalyst layers: a novel electrode fabrication technique for PEM fuel cells via electrospinning10.1002/celc.201600530 ↗