journal article·2018-03

Crosslinked wholly aromatic polyether membranes based on quinoline derivatives and their application in high temperature polymer electrolyte membrane fuel cells

K.J. Kallitsis, R. Nannou, A.K. Andreopoulou, M.K. Daletou, D. Papaioannou, S.G. Neophytides, J.K. Kallitsis

Publisher page

Abstract

Abstract An AB type difunctional quinoline based monomer bearing a pentafluorophenyl unit combined with a phenol functionality is being synthesized and homopolymerized to create linear aromatic polyethers as polymer electrolytes for HT-PEM FCs applications. Several conditions are tested for the optimized synthesis of the monomer and homopolymer. Additionally, covalent crosslinking through aromatic polyether bond formation enables the creation of wholly aromatic crosslinked polymeric electrolyte membranes. More specifically, the perfluorophenyl units are crosslinked with other hydroxyl end functionalized moieties, providing membranes with enhanced chemical and mechanical properties that are moreover easily doped with phosphoric acid even at ambient temperatures. All membranes are evaluated for their structural and thermal characteristics and their doping ability with phosphoric acid. Selected crosslinked membranes are further tested in terms of their single cell performance at the temperature range 160 °C–200 °C showing promising performance and high conductivity values even up to 0.2 S cm−1 in some cases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Acid-dopedpoly- benzimidazoles: a new polymer electrolyte10.1149/1.2044337 ↗
2. Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells10.1149/1.1630037 ↗
3. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100oC10.1021/cm0310519 ↗
4. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
5. A quasi-direct methanol fuel cell system based on blend polymer membrane electrolytes10.1149/1.1473335 ↗
6. Miscibility behavior of polybenzimidazole/sulfonated polysulfone blends for use in fuel cell applications10.1021/ma000165s ↗
7. Sulfonated polybenzimidazoles for high temperature PEM fuel cells10.1021/ma1009098 ↗
8. High-temperature polybenzimidazole fuel cell membranes via a sol–gel process10.1021/cm050831+ ↗
9. 1,2,3-Triazole-Functionalized polysulfone synthesis through microwave-assisted copper-catalyzed click chemistry: a highly proton conducting high temperature membrane10.1021/acsami.6b02713 ↗
10. Pyridine Containing Aromatic Polyether Membranes · 2016 · 91
11. Development of an internal reforming alcohol fuel cell: concept, challenges and opportunities10.1016/j.cej.2011.05.094 ↗
12. Th. Ioannides, S. Neophytides. Insights on the effective incorporation of a foam-based methanol reformer in a high temperature polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2015.07.055 ↗
13. Performance evaluation of a proof-of-concept 70W internal reforming methanol fuel cell system10.1016/j.jpowsour.2016.01.029 ↗
14. Demonstrating feasibility of a high temperature polymer electrolyte membrane fuel cell operation with natural gas reformate composition10.1016/j.ijhydene.2017.03.161 ↗
15. Cross-linked polybenzimidazole membranes for fuel cells10.1021/cm0627793 ↗
16. Poly(benzimidazole)-epoxide crosslink membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2011.09.049 ↗
17. Macromolecular covalently cross-linked quaternary ammonium poly(ether ether ketone) with polybenzimidazole for anhydrous high temperature proton exchange membranes10.1039/C4PY00234B ↗
18. Crosslinked hexafluoropropylidene polybenzimidazole membranes with chloromethyl polysulfone for fuel cell applications10.1002/aenm.201200710 ↗
19. A new self-cross-linked, net-structured, proton conducting polymer membrane for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2009.11.061 ↗
20. Cross-linked poly(2,5-benzimidazole) consisting of wholly aromatic groups for high-temperature PEM fuel cell applications10.1016/j.memsci.2011.02.039 ↗
21. Dually cross-linked polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2015.01.191 ↗
22. Blended polybenzimidazole and melamine-co-formaldehyde thermosets10.1016/j.memsci.2016.05.016 ↗
23. Phosphoric acid-doped cross-linked sulfonated poly (imide-benzimidazole) for proton exchange membrane fuel cell applications10.1016/j.memsci.2015.11.045 ↗
24. Building bridges: crosslinking of sulfonated aromatic polymers—a review10.1016/j.memsci.2012.07.038 ↗
25. Polyelectrolyte composite membranes of polybenzimidazole and crosslinked polybenzimidazole-polybenzoxazine electrospun nanofibers for proton exchange membrane fuel cells10.1039/C2TA00270A ↗
26. Crosslinked polybenzimidazole via a Diels–Alder reaction for proton conducting membranes10.1039/c2jm33725h ↗
27. Polymer electrolyte membranes for high-temperature fuel cells based on aromatic polyethers bearing pyridine units10.1002/pi.2661 ↗
28. Preparation and characterization of novel pyridine-containing polybenzimidazole membrane for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2015.12.006 ↗
29. High performance polymer electrolytes based on main and side chain pyridine aromatic polyethers for high and medium temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2011.06.031 ↗
30. Advanced Energy Technologies S.A. — Advent S.A., http://www.advent-energy.com/.
31. Cross-linking of side chain unsaturated aromatic polyethers for high temperature polymer electrolyte membrane fuel cell applications10.1021/ma200351z ↗
32. Cross-linked high temperature polymer electrolytes through oxadiazole bond formation and their applications in HT PEM fuel cells10.1039/C2TA00610C ↗
33. Thermal cross- linking of aromatic polyethers bearing pyridine groups for use as high temperature polymer electrolytes10.1016/j.memsci.2012.04.057 ↗
34. Covalent cross-linking in phosphoric acid of pyridine based aromatic polyethers bearing side double bonds for use in high temperature polymer electrolyte membrane fuel cells10.1016/j.memsci.2012.12.051 ↗
35. K. Kallitsis, S. Kakogianni, A. Andreopoulou, M. Daletou, S. Neophytides, J. Kallitsis, “Crosslinked wholly aromatic polymeric electrolyte proton conductors based on quinoline units” Granted Greek Patent 20160100491/26.09.2016.
36. Evaluation of the electronic properties of perfluorophenyl functionalized quinolines and their hybrids with carbon nanostructures10.1039/C5CP06016H ↗
37. A novel proton conducting polyelectrolyte composed of an aromatic polyether containing main-chain pyridine units for fuel cells applications10.1021/cm0347382 ↗
38. Synthesis and properties of alkaline stable pyridinium containing anion exchange membranes10.1039/C4RA07616H ↗
39. Polymer and hybrid electron accepting materials based on a semiconducting perfluorophenylquinoline10.1021/ma100961y ↗
40. Palladium-catalyzed cross-coupling reactions of organoboron compounds10.1021/cr00039a007 ↗
41. From Terphenyl-Dendronized Macromonomers to Aromatic-Aliphatic Polyethers bearing two Pendant Dendrons per Repeating Unit10.1021/ma020255s ↗
42. Synthesis and characterization of highly fluorinated cross-linked aromatic polyethers for polymer electrolytes10.1021/cm101405h ↗
43. An alternative methodology for anchoring organic sensitizers onto TiO2 semiconductors for photoelectrochemical applications10.1039/C4TA04515G ↗
44. Synthesis and optical properties of new end functionalized polyquinolines10.1021/cm047909r ↗
45. The interaction of water vapors with H3PO4 imbibed electrolyte based on PBI/polysulfone copolymer blends10.1016/j.memsci.2008.09.040 ↗
46. The interaction of H3PO4 and steam with PBI and TPS polymeric membranes. A TGA and Raman study10.1039/C3TA13335D ↗
47. PBI-based polymer membranes for high temperature Fuel Cells-Preparation, characterization and Fuel Cell operation10.1002/fuce.200400020 ↗
48. Synthesis and characterization of pyridine-based polybenzimidazoles for high temperature Polymer Electrolyte Membrane Fuel Cell applications10.1002/fuce.200400067 ↗
49. A comparative study of phosphoric acid-doped m-PBI membranes10.1002/polb.23403 ↗
50. PBI Membranes Via the PPA Process · 2016 · 217
51. Long-term durability of HT-PEM fuel cells based on thermally crosslinked polybenzimidazole10.1016/j.jpowsour.2016.12.075 ↗
52. The role of phosphoric acid in the anodic electrocatalytic layer in high temperature PEM fuel cells10.1007/s10800-013-0626-2 ↗