journal article·2017-06

Effect of the thickness of the anode electrode catalyst layers on the performance in direct methanol fuel cells

Dean E. Glass, George A. Olah, G.K. Surya Prakash

Publisher page

Abstract

Abstract For the large scale fuel cell manufacture, the catalyst loading and layer thickness are critical factors affecting the performance and cost of membrane electrode assemblies (MEAs). The influence of catalyst layer thicknesses at the anode of a PEM based direct methanol fuel cell (DMFC) has been investigated. Catalysts were applied with the drawdown method with varied thicknesses ranging from 1 mil to 8 mils (1 mil = 25.4 μm) with a Pt/Ru anode loading of 0.25 mg cm-2 to 2.0 mg cm-2. The MEAs with the thicker individual layers (8 mils and 4 mils) performed better overall compared to the those with the thinner layers (1 mil and painted). The peak power densities for the different loading levels followed an exponential decrease of Pt/Ru utilization at the higher loading levels. The highest power density achieved was 49 mW cm-2 with the 4 mil layers at 2.0 mg cm-2 catalyst loading whereas the highest normalized power density was 116 mW mg-1 with the 8 mil layers at 0.25 mg cm-2 loading. The 8 mil drawdowns displayed a 50% and 23% increase in normalized power density compared to the 1 mil drawdowns at 0.25 mg cm-2 and 0.5 mg cm-2 loadings, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Advances in direct oxidation methanol fuel cells10.1016/0378-7753(94)87016-0 ↗
2. 2009
3. Direct methanol fuel cells
4. Prakash, G.K.S.; Surampudi, S.; Narayanan, S.R.; Vamos, E.; Frank, H.A.; Halpert, G.; Olah, G.A., US Patent #6,248,460, 2001.
5. Prakash, G.K.S.; Surampudi, S.; Narayanan, S.R.; Vamos, E.; Frank, H.A.; Halpert, G.; Olah, G.A., US Patent #6,740,434, 2004.
6. Prakash, G.K.S.; Surampudi, S.; Narayanan, S.R.; Vamos, E.; Frank, H.A.; Halpert, G.; Olah, G.A., E.U. Patent 0755576B1, 2008.
7. Prakash, G.K.S.; Vamos, E.; Surampudi, S.; Narayanan, S.R.; Frank, H.A.; Halpert, G.; Olah, G.A., US Patent #7,445,859, 2008.
8. Prakash, G.K.S.; Narayanan, S.R.; Atti, A.; Olah, G.A.; US Patent #7,147,958, 2006.
9. Recent advances in catalysts for direct methanol fuel cells10.1039/c1ee01307f ↗
10. Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices10.1016/j.ijhydene.2009.06.013 ↗
11. Thickness control over ionomer coatings on nano patterned three-phase zones for a highly efficient electrode10.1149/2.041207jes ↗
12. Performance of a direct methanol fuel cell operating close to room temperature10.1115/1.4002311 ↗
13. A model for DMFC cathode impedance: the effect of methanol crossover10.1016/j.elecom.2012.08.002 ↗
14. High activity and durability of Pt catalyst toward methanol electrooxidation in intermediate temperature alkaline media10.1016/j.jpowsour.2012.02.108 ↗
15. On-time determination of Ru crossover in DMFC10.1149/1.3248348 ↗
16. Controlling the adsorption of carbon monoxide on platinum clusters by dopant-induced electronic structure modification10.1002/anie.201604269 ↗
17. Methanol oxidation efficiencies on carbon-nanotube-supported platinum and platinum–ruthenium nanoparticles prepared by pulsed electrodeposition10.1016/j.ijhydene.2011.03.107 ↗
18. Effect of titanium dioxide supports on the activity of Pt-Ru toward electrochemical oxidation of methanol10.1149/1.3559495 ↗
19. Modeling the cathode catalyst layer of a direct methanol fuel cell10.1016/j.jpowsour.2013.05.122 ↗
20. Modeling of coupled multiphase transport in direct methanol fuel cell diffusion layers10.1149/1.3603974 ↗
21. One-dimensional model for a direct methanol fuel cell with a 3D anode structure10.1149/1.3505039 ↗
22. The regimes of catalyst layer operation in a fuel cell10.1016/j.electacta.2010.06.053 ↗
23. A one-dimensional, two-phase model for direct methanol fuel cells – Part I: model development and parametric study10.1016/j.energy.2010.01.034 ↗
24. Three-dimensional multiscale analysis of degradation of nano- and micro-structure in direct methanol fuel cell electrodes after methanol starvation10.1016/j.jpowsour.2016.07.094 ↗
25. Large-scale DMFC stack model: feed disturbances and their impact on stack performance10.1002/fuce.201200042 ↗
26. High performance membrane electrode assemblies by optimization of coating process and catalyst layer structure in direct methanol fuel cells10.1016/j.ijhydene.2011.01.068 ↗
27. The influence of Pt loading, support and nafion content on the performance of direct methanol fuel cells: examined on the example of the cathode10.1002/fuce.200900204 ↗
28. Enhanced performance of a passive direct methanol fuel cell with decreased Nafion aggregate size within the anode catalytic layer10.1016/j.ijhydene.2011.05.059 ↗
29. Anode catalyst layer with novel microstructure for a direct methanol fuel cell10.1016/j.ijhydene.2012.02.040 ↗
30. Effect of design of multilayer electrodes in direct methanol fuel cells (DMFCs)10.1016/j.ijhydene.2013.04.069 ↗
31. Nanostructure catalysts prepared by multi-sputtering deposition process for enhanced methanol electrooxidation reaction10.1016/j.apcatb.2012.11.044 ↗
32. Novel O2-enhanced methanol oxidation performance at Pt–Ru–C sputtered anode in direct methanol fuel cell10.1016/j.jpowsour.2013.06.054 ↗
33. The use of a dynamic hydrogen electrode as an electrochemical tool to evaluate plasma activated carbon as electrocatalyst support for direct methanol fuel cell10.1016/j.materresbull.2008.04.007 ↗
34. Discussion on the challenges of DMFC catalyst loading process for mass production10.1016/j.egypro.2012.08.042 ↗
35. Poly(arylene ether sulfone)s containing pendant sulfonic acid groups as membrane materials for direct methanol fuel cells10.1016/j.memsci.2008.12.043 ↗
36. Formation of an integrated catalyst-coated membrane using electrohydrodynamic atomization Layer-by-Layer deposition for direct methanol fuel cells10.1016/j.jpowsour.2012.09.092 ↗
37. Fabrication of catalyst-coated membrane-electrode assemblies by doctor blade method and their performance in fuel cells10.1016/j.jpowsour.2010.05.004 ↗
38. Influence of ionomer content on the proton conduction and oxygen transport in the carbon-supported catalyst layers in DMFC10.1016/j.ijhydene.2012.03.107 ↗
39. Construction of porous anode by sacrificial template for a passive direct methanol fuel cell10.1016/j.jpowsour.2014.03.121 ↗
40. Development of high-power electrodes for a liquid-feed direct methanol fuel cell10.1016/S0378-7753(02)00541-4 ↗
41. Determination of proton conductivity in anode catalyst layers of the direct methanol fuel cell (DMFC)10.1016/j.jelechem.2003.12.047 ↗
42. Determination of ionic resistance and optimal composition in the anodic catalyst layers of DMFC using AC impedance10.1016/j.ijhydene.2005.01.006 ↗
43. Charge transport in nanostructured PS–PEO–PS triblock copolymer electrolytes10.1021/ma500420w ↗
44. Estimation of diffusion parameters in functionalized silicas with modulated porosity10.1016/j.chroma.2005.03.046 ↗
45. A comparative study of CCM and hot-pressed MEAs for PEM fuel cells10.1016/j.jpowsour.2007.03.062 ↗
46. Havránek · Eur. Fuel Cell Forum · 2001 · 221