Modeling and in situ characterization of lithiation-induced stress in electrodes during the coupled mechano-electro-chemical process
Source abstract
Abstract
Abstract Stress is one of the key factors leading to capacity fading and triggering safety issues in lithium-ion batteries. In this paper, the stress in layered electrodes during the electrochemical process is investigated. Considering the electrochemically induced changes in the elastic modulus of the electrode material, a stress model is established to obtain a modified Stoney stress equation. In addition, in situ bending deformation of the Si composite electrode during lithiation and delithiation is measured to be determined as a function of Li concentration. Combined with the established stress model, the lithiation-induced stress in the Si composite electrode material is quantitatively characterized. It is shown that the maximum compressive stress is 8.53 MPa. Furthermore, the differences between the established stress model and the classical Stoney stress equation are compared and discussed. Lithiation results in softening of the Si composite electrode material, which affects the stress during lithiation. The experimental results clearly demonstrate that softening of the Si composite electrode material significantly decreases and alleviates the stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effects of stress on lithium transport in amorphous silicon electrodes for lithium-ion batteries10.1016/j.nanoen.2015.02.020 ↗
2. Effects of surface tension and electrochemical reactions in Li-ion battery electrode nanoparticles10.1016/j.jpowsour.2016.09.085 ↗
3. Voltage hysteresis of lithium ion batteries caused by mechanical stress10.1039/C5CP06179B ↗
4. Self-limiting lithiation in silicon nanowires10.1021/nn305282d ↗
5. Investigation of failure mechanisms in silicon based half cells during the first cycle by micro X-ray tomography and radiography10.1016/j.jpowsour.2016.04.126 ↗
6. Real-time measurement of stress and damage evolution during initial lithiation of crystalline silicon10.1103/PhysRevLett.107.045503 ↗
7. Mechanics of high-capacity electrodes in lithium-ion batteries10.1088/1674-1056/25/1/014601 ↗
8. Influence of the Si particle size on the mechanical stability of Si-based electrodes evaluated by in-operando dilatometry and acoustic emission10.1016/j.jpowsour.2016.09.017 ↗
9. Time to delamination onset and critical size of patterned thin film electrodes of lithium ion batteries10.1016/j.jpowsour.2015.04.128 ↗
10. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation10.1016/j.jpowsour.2010.02.013 ↗
11. Safety focused modeling of lithium-ion batteries: a review10.1016/j.jpowsour.2015.11.100 ↗
12. Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation10.1016/j.jpowsour.2009.01.021 ↗
13. Stress generation and fracture in lithium insertion materials10.1007/s10008-006-0095-1 ↗
14. Modeling diffusion-induced stress in nanowire electrode structures10.1016/j.jpowsour.2010.02.021 ↗
15. Anisotropic swelling and fracture of silicon nanowires during lithiation10.1021/nl201684d ↗
16. A diffusion and curvature dependent surface elastic model with application to stress analysis of anode in lithium ion battery10.1016/j.ijengsci.2012.06.018 ↗
17. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
18. Lithiation-induced tensile stress and surface cracking in silicon thin film anode for rechargeable lithium battery10.1063/1.4764329 ↗
19. A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell10.1016/j.jmps.2011.01.003 ↗
20. Diffusion induced stress in layered Li-ion battery electrode plates10.1016/j.jpowsour.2012.02.104 ↗
21. Role of material properties and mechanical constraint on stress-assisted diffusion in plate electrodes of lithium ion batteries10.1088/0022-3727/46/10/105307 ↗
22. Threefold increase in the young's modulus of graphite negative electrode during lithium intercalation10.1149/1.3327913 ↗
23. In situ measurement of the deformation and elastic modulus evolution in Si composite electrodes during electrochemical lithiation and delithiation10.1149/2.0801613jes ↗
24. Effects of concentration-dependent elastic modulus on diffusion-induced stresses for battery applications10.1149/1.3454762 ↗
25. The effects of elastic stiffening on the evolution of the stress field within a spherical electrode particle of lithium-ion batteries10.1142/S1758825113500403 ↗
26. Effects of concentration-dependent elastic modulus on the diffusion of lithium ions and diffusion induced stress in layered battery electrodes10.1016/j.jpowsour.2013.09.118 ↗
27. Effects of hydrostatic pressure and modulus softening on electrode curvature and stress in a bilayer electrode plate10.1016/j.commatsci.2014.04.019 ↗
28. Identification of the elastic stiffness of composites using the virtual fields method and digital image correlation10.1007/s10409-015-0410-0 ↗
29. Quantitative assessment of the surface crack density in thermal barrier coatings10.1007/s10409-014-0019-8 ↗
30. Three types of Portevin–Le Chatelier effects: experiment and modelling10.1016/j.actamat.2006.10.029 ↗
31. Investigation of capillary adhesion between the microcantilever and the substrate with electronic speckle pattern interferometry10.1063/1.2403187 ↗
32. An application of Raman spectroscopy on the measurement of residual stress in porous silicon10.1016/j.optlaseng.2004.09.005 ↗
33. A bi-material microcantilever temperature sensor based on optical readout10.1016/j.measurement.2012.04.003 ↗
34. Stress evolution in composite silicon electrodes during lithiation/delithiation10.1149/2.021306jes ↗
35. Real-time stress measurements in lithium-ion battery negative-electrodes10.1016/j.jpowsour.2012.01.036 ↗
36. Thin film graphite electrodes with low stress generation during Li-intercalation10.1016/j.carbon.2011.02.067 ↗
37. Mechanical stresses and morphology evolution in germanium thin film electrodes during lithiation and delithiation10.1016/j.jpowsour.2015.06.155 ↗
38. Nano-silicon/polyaniline composites with an enhanced reversible capacity as anode materials for lithium ion batteries10.1007/s10008-015-2807-x ↗
39. Freund · 2004