journal article·2016-03Open access

Performance of advanced automotive fuel cell systems with heat rejection constraint

R.K. Ahluwalia, X. Wang, A.J. Steinbach

Abstract

Abstract Although maintaining polymer electrolyte fuel cells (PEFC) at temperatures below 80 °C is desirable for extended durability and enhanced performance, the automotive application also requires the PEFC stacks to operate at elevated temperatures and meet the heat rejection constraint, stated as Q/ΔT e net power PEFC system and ΔT is the difference between the stack coolant temperature and 40 °C ambient temperature. We have developed a method to determine the optimum design and operating conditions for an automotive stack subject to this Q/ΔT constraint, and illustrate it by applying it to a state-of-the-art stack with nano-structured thin film ternary catalysts in the membrane electrode assemblies. In the illustrative example, stack coolant temperatures >90 °C, stack inlet pressures >2 atm, and cathode stoichiometries 2 Pt loading in the cathode achieves 753 mW cm −2 power density at the optimum conditions for heat rejection, compared to 964 mW cm −2 in the laboratory cell at the same cell voltage (663 mV) and pressure (2.5 atm) but lower temperature (85 °C), higher cathode stoichiometry (2), and 100% relative humidity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Fuel cell systems for transportation: status and trends10.1016/j.jpowsour.2007.10.026 ↗
2. 2013
3. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
4. Thermodynamics and kinetics of platinum dissolution from carbon-supported electrocatalysts in aqueous media under potentiostatic and potentiodynamic conditions10.1149/2.018306jes ↗
5. Dynamics of particle growth and electrochemical surface area loss due to platinum dissolution10.1149/2.051403jes ↗
6. Catalyst durability in PEM fuel cells with low platinum loading10.1149/2.jes113064 ↗
7. Chemical degradation of perfluorinated sulfonic acid membranes, Polymer Electrolyte Fuel Cell Durability
8. Durability aspects of gas-diffusion and microporous layers, Polymer Electrolyte Fuel Cell Durability
9. Membrane performance and durability overview for automotive fuel cell applications
10. Ahluwalia · 2015
11. Impact of micromolar concentrations of externally-provided chloride and sulfide contaminants on PEMFC reversible stability10.1149/1.2781001 ↗
12. Kinetics of oxygen reduction reaction on nanostructured thin-film platinum alloy catalyst10.1016/j.jpowsour.2012.04.077 ↗
13. Kinetics of hydrogen oxidation and hydrogen evolution reactions on nanostructured thin-film platinum alloy catalyst10.1149/2.028303jes ↗
14. Ahluwalia · 2011
15. Performance and cost of automotive fuel cell systems with ultra-low platinum loadings10.1016/j.jpowsour.2011.01.059 ↗
16. James · 2010
17. Performance of cross-flow humidifier with a high flux water vapor transport membrane10.1016/j.jpowsour.2015.05.013 ↗