journal article·2016-05

Structure analyses using X-ray photoelectron spectroscopy and X-ray absorption near edge structure for amorphous MS3 (M: Ti, Mo) electrodes in all-solid-state lithium batteries

Takuya Matsuyama, Minako Deguchi, Kei Mitsuhara, Toshiaki Ohta, Takuya Mori, Yuki Orikasa, Yoshiharu Uchimoto, Yoshiyuki Kowada, Akitoshi Hayashi, Masahiro Tatsumisago

Publisher page

Abstract

Abstract Electronic structure changes of sulfurs in amorphous TiS3 and MoS3 for positive electrodes of all-solid-state lithium batteries are examined by X-ray photoelectron spectroscopy (XPS) and the X-ray absorption near edge structure (XANES). The all-solid-state cell with amorphous TiS3 electrode shows the reversible capacity of about 510 mAh g−1 for 10 cycles with sulfur-redox in amorphous TiS3 during charge-discharge process. On the other hand, the cell with amorphous MoS3 shows the 1st reversible capacity of about 720 mAh g−1. The obtained capacity is based on the redox of both sulfur and molybdenum in amorphous MoS3. The irreversible capacity of about 50 mAh g−1 is observed at the 1st cycle, which is attributed to the irreversible electronic structure change of sulfur during the 1st cycle. The electronic structure of sulfur in amorphous MoS3 after the 10th charge is similar to that after the 1st charge. Therefore, the all-solid-state cell with amorphous MoS3 electrode shows relatively good cyclability after the 1st cycle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
3. Solid state lithium secondary batteries using an amorphous solid electrolyte in the system (100−x)(0.6Li2S·0.4SiS2)·xLi4SiO4 obtained by mechanochemical synthesis10.1016/S0167-2738(01)00711-1 ↗
4. All solid-state lithium secondary batteries using high lithium ion conducting Li2S-P2S5 glass-ceramics10.1246/cl.2002.1244 ↗
5. Design of composite positive electrode in all-solid-state secondary batteries with Li2S-P2S5 glass-ceramic electrolytes10.1016/j.jpowsour.2005.03.161 ↗
6. All-solid-state lithium secondary batteries using sulfide-based glass ceramic electrolytes10.1142/S1793604708000071 ↗
7. Electrical properties of lithium conductive silicon sulfide glasses prepared by twin roller quenching10.1016/0167-2738(86)90139-6 ↗
8. New, highly ion-conductive crystals precipitated from Li2S-P2S5 glasses10.1002/adma.200401286 ↗
9. Superionic conduction in Li2S-P2S5-LiI-glasses10.1016/0167-2738(81)90341-6 ↗
10. A lithium superionic conductor10.1038/nmat3066 ↗
11. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
12. Transition metal sulfides as cathodes for secondary lithium batteries-II. titanium sulfides10.1016/0013-4686(77)85134-7 ↗
13. Electrochemical characteristics of transition-metal trichalcogenides in the secondary lithium battery10.1016/0167-2738(83)90024-3 ↗
14. XPS investigations of TiOySz amorphous thin films used as positive electrode in lithium microbatteries10.1016/j.ssi.2005.04.007 ↗
15. Amorphous titanium sulfide electrode for all-solid-state rechargeable lithium batteries with high capacity10.1246/cl.2012.886 ↗
16. Electrochemical properties of all-solid-state lithium batteries with amorphous MoS3 electrodes prepared by mechanical milling10.1039/C5TA02263K ↗
17. Amorphous TiS4 positive electrode for lithium-sulfur secondary batteries10.1016/j.elecom.2013.03.004 ↗
18. Composite positive electrode based on amorphous titanium polysulfide for application in all-solid-state lithium secondary batteries10.1016/j.ssi.2013.09.044 ↗
19. Amorphous niobium sulfides as novel positive-electrode materials10.1149/2.0091407eel ↗
20. Electrochemical properties of all-solid-state lithium batteries with amorphous titanium sulfide electrodes prepared by mechanical milling10.1007/s10008-013-2157-5 ↗
21. Improved electrochemical performance of amorphous TiS3 electrodes compared to its crystal for all-solid-state rechargeable lithium batteries10.2109/jcersj2.15299 ↗
22. Structure analyses of amorphous MoS3 active materials in all-solid-state lithium batteries10.5796/electrochemistry.83.889 ↗
23. Insights into Li-S battery cathode capacity fading mechanisms: irreversible oxidation of active mass during cycling10.1149/2.020211jes ↗
24. Thermal reactions of lithiated and delithiated sulfur electrodes in lithium-sulfur batteries10.1149/2.009404eel ↗
25. A highly efficient polysulphide mediator for lithium sulfur batteries10.1038/ncomms6682 ↗
26. Long-life, high-efficiency lithium-sulfur battery from a nanoassembled cathode10.1021/acs.chemmater.5b02533 ↗
27. Single step transformation of sulphur to Li2S2/Li2S in Li-S batteries10.1038/srep12146 ↗
28. Effects of liquid electrolytes on the charge-discharge performance of rechargeable lithium/sulfur batteries: electrochemical and in-situ X-ray absorption spectroscopic studies10.1021/jp207714c ↗
29. Sulfur speciation in Li-S batteries determined by operando X-ray absorption spectroscopy10.1021/jz401763d ↗
30. Unique behavior of nonsolvents for polysulphides in lithium-sulphur batteries10.1039/C4EE00372A ↗
31. Mechanistic insights into operational lithium-sulfur batteries by in situ X-ray diffraction and absorption spectroscopy10.1039/c4ra01388c ↗
32. Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries10.1038/ncomms5759 ↗
33. Radical or not radical: revisiting lithium-sulfur electrochemistry in non-aqueous electrolytes10.1002/aenm.201401801 ↗
34. Operando characterization of intermediates produced in a lithium-sulfur battery10.1149/2.0081507jes ↗
35. Analytical detection of polysulfides in the presence of adsorption additives by operando X-ray absorption spectroscopy10.1021/acs.jpcc.5b05609 ↗
36. Polarized X-ray absorption spectroscopy and XPS of TiS3: S K- and Ti L-edge XANES and S and Ti S2p XPS10.1016/j.susc.2005.03.048 ↗
37. Formation of superionic crystals from mechanically milled Li2S-P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
38. Single-layer semiconducting nanosheets: high-yield preparation and device fabrication10.1002/anie.201106004 ↗
39. Structural and electronic properties of MX3 (M = Ti, Zr and Hf; X = S, Se, Te) from first principles calculations10.1140/epjb/e2015-60005-x ↗
40. X-ray photoelectron, emission, and absorption studies of the electronic structure of molybdenum and tungsten trisulfides and their intercalates10.1007/BF02578114 ↗