journal article·2016-04

Evaluation of electrode materials for all-copper hybrid flow batteries

Puiki Leung, Jesus Palma, Enrique Garcia-Quismondo, Laura Sanz, M.R. Mohamed, Marc Anderson

Publisher page

Abstract

This work evaluates a number of two- and three-dimensional electrodes for the reactions of an all-copper hybrid flow battery. Half- and full-cell experiments are conducted by minimizing the crossover effect of the copper(II) species. The battery incorporates a Nafion® cation exchange membrane and the negative electrolyte is maintained at the monovalent (colourless) state by the incorporating copper turnings in the electrolyte reservoir. Under such conditions, the half-cell coulombic efficiencies of the negative electrode reactions are all higher than 90% regardless of electrode materials and the state-of-charge (SOC). With charge–discharge cycling the half-cell from a 0% SOC, the coulombic efficiencies of the positive electrode reactions are lower than 76% with the planar carbon electrode, which further decrease in shorter charge–discharge cycles. Polarization and half-cell charge–discharge experiments suggest that the high-surface-area electrodes effectively reduce the overpotentials and improve the coulombic efficiencies of both electrode reactions. When copper fibres and carbon felt are used as the negative and positive electrodes, the average coulombic and voltage efficiencies of an all-copper flow battery are as high as c.a. 99% and c.a. 60% at 50 mA cm−2 for 35 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Electrochemical energy storage for green grid10.1021/cr100290v ↗
2. Performance and polarization studies of the magnesium-antimony liquid metal battery with the in-situ reference electrode10.1039/C5RA08606J ↗
3. High-potential zinc-lead dioxide rechargeable cells10.1016/j.electacta.2012.06.089 ↗
4. Recent progress in redox flow battery research and development10.1002/adfm.201200694 ↗
5. Progress in redox flow batteries, remaining challenges and their applications in energy storage10.1039/c2ra21342g ↗
6. Vanadium flow battery for energy storage: prospects and challenges10.1021/jz4001032 ↗
7. Performance characterization of a vanadium redox flow battery at different operating parameters under a standarized test-bed system10.1016/j.apenergy.2014.10.042 ↗
8. The effect of chloride ion complexation on reversibility and redox potential of the Cu(II)/Cu(I) couple for use in redox flow batteries10.1016/j.jpowsour.2012.10.005 ↗
9. Study and characterization of positive electrolytes for application in the aqueous all-copper redox flow battery10.1016/j.jpowsour.2014.12.034 ↗
10. Description and performance of a novel aqueous all-copper redox flow battery10.1016/j.jpowsour.2014.06.008 ↗
11. A secondary battery based on the copper(II)(I) and (I)(0) couples in acetonitrile10.1149/1.2401935 ↗
12. Simultaneous characterization of electrode kinetics and electrolyte properties in ionic liquids using a rotating disc electrode10.1016/j.electacta.2012.02.104 ↗
13. The development of an all copper hybrid redox flow battery using deep eutectic solvents10.1016/j.electacta.2013.03.130 ↗
14. Copper: a key enabler of resource efficiency
15. Leaching of chalcopyrite in cupric chloride solution10.1016/j.hydromet.2004.10.013 ↗
16. The cuprex metal extraction process: recovering copper from sulfide ores10.1007/BF03221105 ↗
17. Preparation of a cost-effective, scalable and energy efficient all-copper redox flow battery10.1016/j.jpowsour.2015.04.176 ↗
18. Characterization of a zinc-cerium flow battery10.1016/j.jpowsour.2011.01.095 ↗
19. R.C. Tangirala, C.T.J. Low, C. Ponce-de-Leon, S.A. Campbell, F.C. Walsh, Copper deposition at segmented, reticulated vitreous carbon in Hull cell, 88, 2010, pp. 84–92.10.1179/174591910X12646070884872 ↗
20. Bard · 2000
21. The influence of operational parameters on the performance of an undivided zinc-cerium flow battery10.1016/j.electacta.2012.06.074 ↗
22. Characterization of a carbon felt electrode: structural and physical properties10.1039/a805823g ↗
23. Reticulated vitreous carbon as an electrode material10.1016/j.jelechem.2003.07.019 ↗
24. Investigation on the performance evaluation method of flow batteries10.1016/j.jpowsour.2014.04.148 ↗
25. Impact of proton concentration on equilibrium potential and polarization of vanadium flow batteries10.1002/cplu.201402040 ↗
26. Performance characteristics of carbon plastic electrodes in the all-vanadium redox cell10.1149/1.2097588 ↗
27. A mixed acid based vanadium-cerium redox flow battery with a zero-gap serpentine architecture10.1016/j.jpowsour.2014.10.034 ↗
28. Preparation of silica nanocomposite anion-exchange membranes with low vanadium-ion crossover for vanadium redox flow batteries10.1016/j.electacta.2013.04.155 ↗