journal article·2020-07

In-situ tailored 3D Li2O@Cu nanowires array enabling stable lithium metal anode with ultra-high coulombic efficiency

Lei Tan, Xinhai Li, Meng Cheng, Tiancheng Liu, Zhixing Wang, Huajun Guo, Guochun Yan, Lingjun Li, Yong Liu, Jiexi Wang

Publisher page

Abstract

Abstract Suffering from uncontrollable dendrite growth and volume expansion, Li metal batteries have the drawbacks of low coulombic efficiency and short cycle life, which severely limits its practical application. Herein, a multifunctional 3D skeleton of Li2O@Cu composite nanowires array on Cu foam (Li2O@CuNA/CF), in which the Li2O is homogenously distributed onto the Cu nanowires array through the in-situ spontaneous reaction between CuO nanowire and Li metal or electrochemical lithiation of CuO, is designed and serves as lithium storage host for Li metal anode. The lithiophilic Li2O@CuNA provides enough Li nucleation sites for regulating the distribution of Li ions and homogenizing the repeated plating/stripping of Li. The Li2O@CuNA/CF hierarchical structure ensures the rapid charge transfer and inhibits of Li volume expansion. As a result, Li is well accommodated in the Li2O@CuNA/CF skeleton and no distinct Li dendrite is observed. More importantly, the coulombic efficiency is up to 98.5% after 300 cycles in half-cell. The corresponding Li2O@CuNA/CF/Li symmetric cell exhibits superior stable voltage profile with ultra-low voltage hysteresis (15 mV) for 600 h. This work provides a guide for building a 3D Li2O-metal lithiophilic framework for safe and stable Li anode in Li metal batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
2. A comprehensive review of lithium salts and beyond for rechargeable batteries: progress and perspectives10.1016/j.mser.2018.07.001 ↗
3. Fiber-based wearable electronics: a review of materials, fabrication, devices, and applications10.1002/adma.201400633 ↗
4. In-situ visualization of lithium plating in all-solid-state lithium-metal battery10.1016/j.nanoen.2019.103895 ↗
5. Electrospun ceramic nanofibers as 1D solid electrolytes for lithium batteries10.1016/j.elecom.2019.106483 ↗
6. Towards high-safe lithium metal anodes: suppressing lithium dendrites via tuning surface energy10.1002/advs.201600168 ↗
7. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
8. RuO2 particles anchored on brush-like 3D carbon cloth guide homogenous Li/Na nucleation framework for stable Li/Na anode10.1002/smll.201903725 ↗
9. Modeling of lithium plating and lithium stripping in lithium-ion batteries10.1016/j.jpowsour.2018.12.084 ↗
10. Lithiophilic Ag/Li composite anodes via a spontaneous reaction for Li nucleation with a reduced barrier10.1039/C9TA05335B ↗
11. Interfacial chemistry regulation via a skin-grafting strategy enables high-performance lithium-metal batteries10.1021/jacs.7b06437 ↗
12. Ionic-liquid-nanoparticle hybrid electrolytes: applications in lithium metal batteries10.1002/anie.201307137 ↗
13. Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive10.1016/j.nanoen.2015.04.009 ↗
14. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism10.1021/ja312241y ↗
15. Highly fluorinated interphases enable high-voltage Li-metal batteries
16. Fast ion transport at solid–solid interfaces in hybrid battery anodes10.1038/s41560-018-0096-1 ↗
17. Stabilizing Li/electrolyte interface with a transplantable protective layer based on nanoscale LiF domains10.1016/j.nanoen.2017.07.052 ↗
18. Natural SEI-inspired dual-protective layers via atomic/molecular layer deposition for long-life metallic lithium anode10.1016/j.matt.2019.06.020 ↗
19. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
20. A facile surface chemistry route to a stabilized lithium metal anode10.1038/nenergy.2017.119 ↗
21. A platinum nanolayer on lithium metal as an interfacial barrier to shuttle effect in Li-S batteries10.1016/j.jpowsour.2019.04.078 ↗
22. Facile and scalable engineering of a heterogeneous microstructure for uniform, stable and fast lithium plating/stripping10.1039/C9TA06500H ↗
23. Rational design of robust-flexible protective layer for safe lithium metal battery10.1016/j.ensm.2018.09.015 ↗
24. An armored mixed conductor interphase on a dendrite-free lithium-metal anode10.1002/adma.201804461 ↗
25. Metal oxide nanoparticles induced step-edge nucleation of stable Li metal anode working under an ultrahigh current density of 15 mA cm −210.1016/j.nanoen.2017.12.055 ↗
26. Uniform lithium nucleation/growth induced by lightweight nitrogen-doped graphitic carbon foams for high-performance lithium metal anodes
27. Lithiophilic LiC6 layers on carbon hosts enabling stable Li metal anode in working batteries10.1002/adma.201807131 ↗
28. Interlayered dendrite-free lithium plating for high-performance lithium-metal batteries10.1002/adma.201901662 ↗
29. Prestoring lithium into stable 3D nickel foam host as dendrite-free lithium metal anode10.1002/adfm.201700348 ↗
30. Compact 3D copper with uniform porous structure derived by electrochemical dealloying as dendrite-free lithium metal anode current collector10.1002/aenm.201800266 ↗
31. Stable metal anode enabled by porous lithium foam with superior ion accessibility10.1002/adma.201802156 ↗
32. A highly stable host for lithium metal anode enabled by Li9Al4-Li3N-AlN structure10.1016/j.nanoen.2019.02.033 ↗
33. Ultrahigh-current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework10.1126/sciadv.1701301 ↗
34. Fluidized bed reaction towards crystalline embedded amorphous Si anode with much enhanced cycling stability10.1039/C8CC00575C ↗
35. A novel dried plum-like yolk–shell architecture of tin oxide nanodots embedded into a carbon matrix: ultra-fast assembly and superior lithium storage properties10.1039/C8TA12399C ↗
36. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
37. Chemical dealloying derived 3D porous current collector for Li metal anodes10.1002/adma.201601409 ↗
38. Unique 3D nanoporous/macroporous structure Cu current collector for dendrite-free lithium deposition10.1016/j.ensm.2018.07.010 ↗
39. Stable Li metal anodes via regulating lithium plating/stripping in vertically aligned microchannels10.1002/adma.201703729 ↗
40. Lithium metal anode on a copper dendritic superstructure10.1016/j.elecom.2018.12.015 ↗
41. 3D porous Cu current collector/Li-metal composite anode for stable lithium-metal batteries
42. Lithiophilic Ag nanoparticle layer on Cu current collector toward stable Li metal anode10.1021/acsami.9b01521 ↗
43. Fabrication of lithiophilic copper foam with interfacial modulation toward high-rate lithium metal anodes10.1021/acsami.8b07362 ↗
44. Vertically aligned lithiophilic CuO nanosheets on a Cu collector to stabilize lithium deposition for lithium metal batteries
45. Graphene anchored on Cu foam as a lithiophilic 3D current collector for a stable and dendrite-free lithium metal anode10.1039/C8TA02810A ↗
46. Hierarchical Co3O4 nanofiber–carbon sheet skeleton with superior Na/Li-philic property enabling highly stable Alkali metal batteries
47. Cu nanowires shelled with NiFe layered double hydroxide nanosheets as bifunctional electrocatalysts for overall water splitting10.1039/C7EE01571B ↗
48. Yucca fern shaped CuO nanowires on Cu foam for remitting capacity fading of Li-ion battery anodes
49. CoO nanofiber decorated nickel foams as lithium dendrite suppressing host skeletons for high energy lithium metal batteries10.1016/j.ensm.2018.05.017 ↗
50. 3D porous Cu current collectors derived by hydrogen bubble dynamic template for enhanced Li metal anode performance10.1002/adfm.201808468 ↗
51. Synthesis and characterization of a hierarchically structured three-dimensional conducting scaffold for highly stable Li metal anodes10.1039/C9TA03062J ↗