Safety performance and failure prediction model of cylindrical lithium-ion battery
Source abstract
Abstract
Abstract In this paper, the safety performance model of cylindrical lithium-ion batteries, which is based on a second-order oscillation feature that is subjected to mechanical abuse is proposed via a discrete Fourier transformation of experimental data. Combined with the safety performance model and Crushable-Foam material model, the simulation results show that the average predictive error of the force-displacement and failure displacement is less than 8.8% and 4.0%, respectively. A battery fracture angle model is proposed, the fracture angle is only related to the load property, and the state-of-charge has minimal influence under the same load conditions. Furthermore, the failure prediction model of the soft short-circuit and the failure warning verification system are proposed. The experimental results show that the failure prediction model can warn the soft short-circuit in time with a certain safety margin. With further research, the safety performance model and the failure prediction model, which is based on mechanical penetration displacement, can be combined with other failure signals to provide more reliable information about battery safety. The failure warning device has the advantages of low cost and simple structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A real-time insulation detection method for battery packs used in electric vehicles10.1016/j.jpowsour.2018.03.018 ↗
2. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
3. Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells10.1016/j.jpowsour.2013.04.135 ↗
4. Clay-like mechanical properties for the jellyroll of cylindrical Lithium-ion cells10.1016/j.apenergy.2017.01.062 ↗
5. Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact10.1016/j.jpowsour.2014.08.014 ↗
6. Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing10.1016/j.engfailanal.2015.03.025 ↗
7. Mechanical behavior of a battery separator in electrolyte solutions10.1016/j.jpowsour.2011.06.026 ↗
8. A novel phenomenological multi-physics model of Li-ion battery cells10.1016/j.jpowsour.2016.07.019 ↗
9. Phenomenological force and swelling models for rechargeable lithium-ion battery cells10.1016/j.jpowsour.2016.01.103 ↗
10. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells10.1016/j.jpowsour.2013.08.056 ↗
11. Damage of cells and battery packs due to ground impact10.1016/j.jpowsour.2014.05.078 ↗
12. Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios10.1016/j.jpowsour.2016.04.005 ↗
13. Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse10.1016/j.jpowsour.2015.04.162 ↗
14. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity10.1016/j.jpowsour.2011.10.094 ↗
15. A representative-sandwich model for simultaneously coupled mechanical electrical thermal simulation of a lithium-ion cell under quasi-static indentation tests10.1016/j.jpowsour.2015.08.049 ↗
16. Deformation and failure mechanisms of 18650 battery cells under axial compression10.1016/j.jpowsour.2016.10.064 ↗
17. Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries10.1016/j.jpowsour.2017.04.103 ↗
18. Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies10.1016/j.apenergy.2016.03.108 ↗
19. J. Xu, B.H. Liu, D.Y. Hu. State of charge dependent mechanical integrity behavior of 18650 lithium-ion batteries. Sci. Rep. 6: 21829 DOI: 10.1038/srep21829.10.1038/srep21829 ↗
20. Mechanical damage in a lithium-ion pouch cell under indentation loads10.1016/j.jpowsour.2017.04.101 ↗
21. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells10.1016/j.jpowsour.2012.04.055 ↗
22. Finite element model approach of a cylindrical lithium ion battery cell with a focus on minimization of the computational effort and short circuit prediction10.1016/j.jpowsour.2017.06.028 ↗
23. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions10.1016/j.jpowsour.2012.07.057 ↗
24. Fail-safe design for large capacity lithium-ion battery systems10.1016/j.jpowsour.2012.03.015 ↗
25. Internal short circuit detection method for battery pack based on circuit topology10.1007/s11431-017-9299-3 ↗
26. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
27. Wang · 2005 · 375
28. Internal short circuit detection for battery pack using equivalent parameter and consistency method10.1016/j.jpowsour.2015.06.087 ↗
29. Enhancing Li-ion battery safety by early detection of nascent internal shorts10.1149/2.0431701jes ↗
30. Internal strain and temperature discrimination with optical fiber hybrid sensors in Li-ion batteries10.1016/j.jpowsour.2018.10.096 ↗
31. Real time thermal monitoring of lithium batteries with fiber sensors and thermocouples: a comparative study10.1016/j.measurement.2017.07.049 ↗
32. Ichimura · 2007 · 687
33. Schembri
34. State of charge-dependent failure prediction model for cylindrical lithium-ion batteries under mechanical abuse10.1016/j.apenergy.2019.113365 ↗
35. Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading10.1016/j.electacta.2017.10.045 ↗
36. Dynamic impact tests on lithium-ion cells10.1016/j.ijimpeng.2017.04.025 ↗
37. Thermal runaway detection of cylindrical 18650 lithium-ion battery under quasi-static loading conditions10.1016/j.jpowsour.2017.10.013 ↗
38. Progressive mechanical indentation of large-format Li-ion cells10.1016/j.jpowsour.2016.11.094 ↗
39. Failure in lithium-ion batteries under transverse indentation loading10.1016/j.jpowsour.2018.04.003 ↗
40. Internal configuration of prismatic lithium-ion cells at the onset of mechanically induced short circuit10.1016/j.jpowsour.2015.12.026 ↗
41. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
42. Comparative study of mechanical-electrical-thermal responses of pouch, cylindrical, and prismatic lithium-ion cells under mechanical abuse10.1007/s11431-017-9296-0 ↗