Hollow porous bowl-shaped lithium-rich cathode material for lithium-ion batteries with exceptional rate capability and stability
Source abstract
Abstract
Abstract Although lithium-rich layered composite cathode materials can meet the requirements of high discharge capacities and energy densities of lithium-ion batteries (LIBs), the drawbacks of encountering structural reconstruction, sharp voltage decay during cycling as well as low packing density still exist, which retard their further commercial development. This paper presents a novel approach to construct hollow porous bowl-shaped Li1.2Mn0.54Ni0.13Co0.13O2 (denoted as HPB-LMNCO) particles, which involves bowl-shaped carbonaceous particles as the predominant template and polyvinylpyrrolidone as an assistant soft template. One crucial step during the synthetic process is the controlled growth of metal ions with specific molar ratios in the bowl-shaped carbonaceous particles, and the key control parameter is the heating rate to ensure the prepared particles own the desired hollow porous bowl-shaped morphology. Of particular note is the desirable architecture which not only inherits the merits of hollow structures but also facilitates the tight particles packing. Owing to these advantages, utilizing this HPB-LMNCO as a cathode material manifests impressive rate capability and exceptional cycling stability at high rates with capacity retention of above 82% over 100 cycles. These results reveal that structural design of cathode materials play a pivotal role in developing high-performance LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Lithium batteries and cathode materials10.1021/cr020731c ↗
2. Building better batteries10.1038/451652a ↗
3. Where do batteries end and supercapacitors begin10.1126/science.1249625 ↗
4. A review on design strategies for carbon based metal oxides and sulfides nanocomposites for high performance Li and Na ion battery anodes10.1002/aenm.201601424 ↗
5. Recent progress in the design of advanced cathode materials and battery models for high-performance lithium-X (X = O2, S, Se, Te, I2, Br2)
6. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
7. One-pot synthesis of lithium-rich cathode material with hierarchical morphology10.1021/acs.nanolett.6b03296 ↗
8. Synthesis and structural characterization of a novel layered lithium manganese oxide, Li0.36Mn0.91O2, and its lithiated derivative, Li1.09Mn0.91O210.1006/jssc.1993.1182 ↗
9. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗
10. Synthesis, structure, and electrochemical behavior of Li[NixLi1/3-2x/3Mn2/3-x/3]O210.1149/1.1471541 ↗
11. Spinel/layered heterostructured cathode material for high-capacity and high-rate Li-ion batteries10.1002/adma.201300598 ↗
12. Charge-compensation in 3D-transition-metaloxide intercalation cathodes through the generation of localized electron holes on oxygen10.1038/nchem.2471 ↗
13. A new anion receptor for improving the interface between lithium and manganese-rich layered oxide cathode and the electrolyte10.1021/acs.chemmater.6b04784 ↗
14. On the localized nature of the structural transformations of Li2MnO3 following electrochemical cycling10.1002/aenm.201501252 ↗
15. A new spinel-layered Li-rich microsphere as a high-rate cathode material for Li-ion batteries10.1002/aenm.201400062 ↗
16. Enhanced electrochemical performance of layered lithium-rich cathode materials by constructing spinel-structure skin and ferric oxide islands10.1021/acsami.6b14862 ↗
17. High-performance Li(Li0.18Ni0.15Co0.15Mn0.52)O2@Li4M5O12 heterostructured cathode material coated with a lithium borate oxide glass layer10.1021/acs.chemmater.5b02331 ↗
18. Sphere-shaped hierarchical cathode with enhanced growth of nanocrystal planes for high-rate and cycling-stable Li-ion batteries10.1021/nl5041594 ↗
19. Structural and chemical evolution of Li- and Mn-rich layered cathode material10.1021/cm5045978 ↗
20. A 3D porous Li-rich cathode material with an in situ modified surface for high performance lithium ion batteries with reduced voltage decay10.1039/C6TA01448H ↗
21. Dahn, Synthesis and characterization of the lithium-rich core-shell cathodes with low irreversible capacity and mitigated voltage fade10.1021/acs.chemmater.5b00617 ↗
22. Measurements of interdiffusion coefficients of transition metals in layered Li-Ni-Mn-Co oxide core-shell materials during sintering10.1021/acs.chemmater.5b03499 ↗
23. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
24. Structure dependent electrochemical performance of Li-rich layered oxides in lithium-ion batteries10.1016/j.nanoen.2017.04.005 ↗
25. Hollow porous hierarchical-structured 0.5Li2MnO3•0.5LiMn0.4Co0.3Ni0.3O2 as a high-performance cathode material for lithium-ion batteries10.1021/acsami.6b09118 ↗
26. Asymmetric flask-like hollow carbonaceous nanoparticles fabricated by the synergistic interaction between soft template and biomass10.1021/jacs.6b10841 ↗
27. Formation of ZnMn2O4 ball-in-ball hollow microspheres as a high-performance anode for lithium-ion batteries10.1002/adma.201201779 ↗
28. Nanoarchitecture multi-structural cathode materials for high capacity lithium batteries10.1002/adfm.201200536 ↗
29. Direct atomic-resolution observation of two phases in the Li1.2Mn0.567Ni0.166Co0.067O2 cathode material for lithium-ion batteries10.1002/anie.201301236 ↗
30. Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni(OH)2 structure10.1016/0167-2738(90)90049-W ↗
31. XPS studies of solvated metal atom dispersed catalysts. Evidence for layered cobalt-manganese particles on alumina and silica10.1021/ja00003a019 ↗
32. Layered lithium-rich oxide nanoparticles doped with spinel phase: acidic sucrose-assistant synthesis and excellent performance as cathode of lithium ion battery10.1021/acsami.5b10219 ↗
33. A new three-volt spinel Li1+xMn1.5Ni0.5O4 for secondary lithium batteries10.1149/1.1836686 ↗
34. Lithium extraction mechanism in Li-rich Li2MnO3 involving oxygen hole formation and dimerization10.1021/acs.chemmater.6b02870 ↗
35. Lithium- and manganese-rich oxide cathode materials for high-energy lithium ion batteries10.1002/aenm.201600906 ↗
36. Understanding the anomalous capacity of Li/Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 cells using in situ X-ray diffraction and electrochemical studies10.1149/1.1480014 ↗
37. Uniform Li1.2Mn0.54Ni0.13Co0.13O2 hollow microspheres with improved electrochemical performance by a facile solvothermal method for lithium ion batteries10.1016/j.electacta.2017.10.119 ↗
38. Li-rich nanoplates of Li1.2Mn0.54Ni0.13Co0.13O2 layered oxide with exposed {010} planes as a high-performance cathode for lithium-ion batteries10.1016/j.jallcom.2017.10.285 ↗
39. A peanut-like hierarchical micro/nano-Li1.2Mn0.54Ni0.13Co0.13O2 cathode material for lithium-ion batteries with enhanced electrochemical performance10.1039/C5TA02915E ↗
40. Facile design and synthesis of Li-rich nanoplates cathodes with habit-tuned crystal for lithium ion batteries10.1016/j.jpowsour.2016.09.150 ↗
41. Full microwave synthesis of advanced Li-rich manganese based cathode material for lithium ion batteries10.1016/j.jpowsour.2016.10.107 ↗
42. Rapid self-assembly spherical Li1.2Mn0.56Ni0.16Co0.08O2 with improved performances by microwave hydrothermal method as cathode for lithium-ion batteries10.1021/acsami.6b01683 ↗
43. Tailoring anisotropic Li-ion transport tunnels on orthogonally arranged Li-rich layered oxide nanoplates toward high-performance Li-ion batteries10.1021/acs.nanolett.6b04951 ↗
44. Facile synthesis of platelike hierarchical Li1.2Mn0.54Ni0.13Co0.13O2 with exposed {010} planes for high-rate and long cycling-stable lithium ion batteries10.1021/acsami.6b08835 ↗
45. Mesoporous Li1.2Mn0.54Ni0.13Co0.13O2 nanotubes for high-performance cathodes in Li-ion batteries10.1016/j.jpowsour.2016.01.031 ↗
46. Li1.2Mn0.54Ni0.13Co0.13O2 hollow hierarchical microspheres with enhanced electrochemical performances as cathode material for lithium-ion battery application10.1016/j.electacta.2017.03.201 ↗
47. Structural and electrochemical evidence of layered to spinel phase transformation of Li and Mn rich layered cathode materials of the formulae xLi[Li1/3Mn2/3]O2•(1-x)LiMn1/3Ni1/3Co1/3O2 (x = 0.2, 0.4, 0.6) upon cycling10.1149/2.0101410jes ↗
48. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade10.1002/anie.201506408 ↗
49. Facile synthesis of the Li-rich layered oxide Li1.23Ni0.09Co0.12Mn0.56O2 with superior lithium storage performance and new insights into structural transformation of the layered oxide material during charge-discharge cycle: in situ XRD characterization10.1021/am405844b ↗