Study on (100-x)(70Li 2 S-30P 2 S 5 )-xLi 2 ZrO 3 glass-ceramic electrolyte for all-solid-state lithium-ion batteries
Source abstract
Abstract
Abstract A novel glass-ceramic electrolyte of (100-x)(70Li 2 S-30P 2 S 5 )-xLi 2 ZrO 3 (x = 0, 1, 2, 5) is successfully prepared by a vibratory ball-milling method and followed by a heat-treatment process. Composition of the ternary sulfide electrolyte and the heat-treatment process are optimized by physical characterizations and electrochemical measurements. The testing results show that the optimal substitution quantity of Li 2 ZrO 3 into the Li 2 S-P 2 S 5 electrolyte substrate is 1 mol %. An appropriate heat-treatment temperature of 99(70Li 2 S-30P 2 S 5 )-1Li 2 ZrO 3 glass-ceramic electrolyte is 285 °C. Among the as-prepared ternary electrolyte samples, 99(70Li 2 S-30P 2 S 5 )-1Li 2 ZrO 3 glass-ceramic electrolyte may exhibit the highest conductivity of 2.85 × 10 −3 S cm −1 at room temperature, which is much higher than that of the 70Li 2 S-30P 2 S 5 glass-ceramic electrolyte. Compared to that of the all-solid-state lithium-ion battery of LiCoO 2 /70Li 2 S-30P 2 S 5 /In-Li, discharge capacities of all-solid-state lithium-ion battery of LiCoO 2 /99(70Li 2 S-30P 2 S 5 )-1Li 2 ZrO 3 /In-Li may increase 41.0% at the 10th charge-discharge cycle and 21.9% at the 50th charge-discharge cycle, respectively. Furthermore, electrochemical impedance spectroscopy (EIS) analyses of all-solid-state lithium-ion batteries reveal that addition of Li 2 ZrO 3 into the Li 2 S-P 2 S 5 electrolyte substrate may decrease the interfacial resistance between the electrodes and solid electrolyte. The improvement of electrochemical performances of 99(70Li 2 S-30P 2 S 5 )-1Li 2 ZrO 3 glass-ceramic electrolyte is ascribed to both the stable crystal structure and a high lithium-ion diffusion coefficient of Li 2 ZrO 3 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Electrolyte for solid-state lithium rechargeable batteries: recent advanced and perspectives10.1039/c0cs00081g ↗
2. Lithium and lithium ion batteries for applications in microelectronicdevices: a review10.1016/j.jpowsour.2015.03.164 ↗
3. Electrolytes for Li-ion transport-Review10.1016/j.ssi.2015.02.006 ↗
4. Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies10.1039/C4TA00716F ↗
5. High-power all-solid-state batteries using sulfidesuperionic conductors10.1038/nenergy.2016.30 ↗
6. Li2OHCl crystalline electrolyte for stable metallic lithium anodes10.1021/jacs.5b11851 ↗
7. Progress and prospective of solid-state lithium batteries
8. Preparation of lithium ion conducting solid electrolyte ofNASICON-type Li1+xAlxTi2-x(PO4)3(x=0.3) obtained by using the mechanochemical method and its application as surfacemodification materials of LiCoO2cathode for lithium cell10.1016/j.jpowsour.2013.05.039 ↗
9. Ultra-thin LiPON films Fundamental properties and application in solid state thin film model batteries10.1016/j.jpowsour.2014.10.202 ↗
10. Domain boundaries and their influence on Li migration in solid-state electrolyte (La,Li)TiO310.1016/j.jpowsour.2014.11.139 ↗
11. Nanostructured garnet-type solid electrolytes for lithium batteries:electrospinning synthesis of Li7La3Zr2O12Nanowires and particle size-dependent phase transformation10.1021/acs.jpcc.5b03589 ↗
12. Characterization of Li2S-SiS2-LixMOy (M=Si, P, Ge) amorphous solid electrolytes prepared by melt-quenching and mechanical milling10.1016/S0167-2738(02)00077-2 ↗
13. Preparation of Li2S-P2S5 amorphous solid electrolytes by mechanical milling10.1111/j.1151-2916.2001.tb00685.x ↗
14. Lithium ionic conductor thio-LISICON10.1149/1.1379028 ↗
15. A lithium superionic conductor10.1038/nmat3066 ↗
16. Superionic glass and glass-ceramics in the Li2S-P2S5 system for all-solid-state lithium secondary batteries10.1016/j.ssi.2012.03.013 ↗
17. All-solid-state lithium batteries with Li3PS4 glass as active material10.1016/j.jpowsour.2015.05.073 ↗
18. All-solid-state lithium secondary batteries using the 75Li2S·25P2S5 glass and the 70Li2S·30P2S5 glass–ceramic as solid electrolytes10.1016/j.jpowsour.2013.01.090 ↗
19. Preparation and characterization of lithium ion conducting Li2S -P2S5-GeS2 glasses and glass-ceramics10.1016/j.jnoncrysol.2010.05.016 ↗
20. Electrical and electrochemical properties of glass-ceramic electrolytes in the systems Li2S-P2S5-P2S3 and Li2S-P2S5-P2O510.1016/j.ssi.2010.06.018 ↗
21. Electrochemical properties of amorphous solid electrolytes in the system Li2S-Al2S3-P2S510.1016/j.ssi.2012.03.003 ↗
22. Conductivity of 70Li2S-30P2S5 glass and glass-ceramics added with lithium halides10.1016/j.ssi.2014.05.002 ↗
23. Preparation and electrochemical characterization of (100-x)(0.7Li2S· 0.3P2S5)· xLiBr glass-ceramic electrolytes10.1007/s40243-013-0018-x ↗
24. Preparation and ionic conductivity of (100-x)(0.8Li2S·0.2P2S5)·xLiI glass-ceramic electrolytes10.1007/s10008-012-1900-7 ↗
25. Preparation and ionic conductivities of (100-x)(0.75LiS·0.25P2S5)·LiBH4 glass electrolytes10.1016/j.jpowsour.2012.12.001 ↗
26. High-temperature performance of all-solid-state battery assembled with95(0.7Li2S-0.3P2S5)-5Li3PO4glass electrolyte10.1016/j.ssi.2016.09.002 ↗
27. Suppression of H2S gas generation from 75Li2S·25P2S510.1007/s10853-013-7226-8 ↗
28. Improvement of chemical stability of Li3PS4 glass electrolytes by adding MxOy (M=Fe, Zn, and Bi) nanoparticles10.1039/c3ta10247e ↗
29. Improved chemical stability in Li2S-P2S5-P2O5-ZnO composite electrolytes for all-solid-state rechargeable lithium batteries10.1016/j.jallcom.2013.12.191 ↗
30. Characteristics of the Li2O-Li2S-P2S5 glasses synthesized by the two-step mechanical milling10.1016/j.jnoncrysol.2012.12.044 ↗
31. A citrate sol–gel method to synthesize Li2ZrO3 nanocrystals with improved CO2 capture properties10.1039/c0jm03243c ↗
32. Synthesis and CO2 capture property of high aspect-ratio Li2ZrO3 nanotubes arrays10.1016/j.apsusc.2011.04.116 ↗
33. Electrochemical performance and lithium-ion insertion/extraction mechanism studies of the novel Li2ZrO3anode materials10.1016/j.electacta.2015.01.220 ↗
34. Unraveling the multiple effects of Li2ZrO3coating on the structural and electrochemical performances of LiCoO2as high-voltage cathode materials10.1016/j.electacta.2016.05.066 ↗
35. Effect of heat-treatment on Li2ZrO3-coated LiNi1/3Co1/3Mn1/3O2and its high voltage electrochemical performance10.1016/j.jallcom.2015.08.114 ↗
36. Preparation of magnesium ion conducting MgS–P2S5–MgI2 glasses by a mechanochemical technique10.1016/j.ssi.2013.10.037 ↗
37. Structure and properties of the 70Li2S · (30 − x)P2S5 · xP2O5oxysulfide glasses and glass–ceramics10.1016/j.jnoncrysol.2007.07.059 ↗
38. Structure change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere10.1016/j.ssi.2010.10.013 ↗
39. Fast lithium-ion conducting glass-ceramics in the system Li2S-SiS2-P2S510.1149/1.1540792 ↗
40. Lithium ion conducting solid electrolytes prepared from Li2S, elemental P and S10.1016/j.ssi.2006.04.024 ↗
41. Characterization of amorphous and crystalline Li2S–P2S5–P2Se5 solid electrolytes for all-solid-state lithium ion batteries10.1016/j.ssi.2012.05.013 ↗
42. Formation of the high lithium ion conducting phase from mechanically milled amorphous Li2S-P2S5 system10.1016/j.jpowsour.2010.12.020 ↗
43. Li2ZrO3-coated 0.4Li2MnO3.0.6LiNi1/3Co1/3Mn1/3O2for high performance cathode material in lithium-ion battery10.1016/j.jpowsour.2014.04.068 ↗
44. Structure, ionic conductivity and electrochemical stability of Li2S–P2S5–LiI glass and glass–ceramic electrolytes10.1016/j.ssi.2012.01.017 ↗
45. A new lithium-ion conducting glass ceramic in the composition of 75Li2S-5P2S3-20P2S5(mol%)10.1016/j.ssi.2013.08.023 ↗
46. Li3PO4-doped Li7P3S11 glass-ceramic electrolytes with enhanced lithium ion conductivities and application in all-solid-state batteries10.1016/j.jpowsour.2015.02.160 ↗
47. Preparation and characterization of superionic conducting Li7P3S11 crystal glassy liquids10.2109/jcersj2.118.305 ↗
48. Preparation of Li2S-GeSe2-P2S5 electrolyte by a single step ball-milling for all-solid-state lithium secondary batteries10.1016/j.jpowsour.2010.02.042 ↗
49. Electrochemical performance of all-solid-state lithium secondary batteries with Li–Ni–Co–Mn oxide positive electrodes10.1016/j.electacta.2010.07.066 ↗
50. Space–charge layer effect at interface between oxide cathode and sulfide electrolyte in all-solid-state lithium-ion battery10.1021/cm5016959 ↗
51. Interface-engineered all-solid-state Li-Ion batteries based on garnet-type fast Li conductors10.1002/aenm.201600736 ↗
52. In-situ Li7La3Zr2O12/LiCoO2 interface modification for advanced all-solid-state battery10.1016/j.jpowsour.2014.02.102 ↗
53. Negating interfacial impedance in garnet-based solid-state Li metal batteries10.1038/nmat4821 ↗
54. A review of lithium and non-lithium based solid state batteries10.1016/j.jpowsour.2015.02.054 ↗