journal article·2017-06

Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performance

S. Chevalier, N. Lavielle, B.D. Hatton, A. Bazylak

Publisher page

Abstract

Abstract In this first of a series of two papers, we report an in-depth analysis of the impact of the gas diffusion layer (GDL) structure on the polymer electrolyte membrane (PEM) fuel cell performance through the use of custom GDLs fabricated in-house. Hydrophobic electrospun nanofibrous gas diffusion layers (eGDLs) are fabricated with controlled fibre diameter and alignment. The eGDLs are rendered hydrophobic through direct surface functionalization, and this molecular grafting is achieved in the absence of structural alteration. The fibre diameter, chemical composition, and electrical conductivity of the eGDL are characterized, and the impact of eGDL structure on fuel cell performance is analysed. We observe that the eGDL facilitates higher fuel cell power densities compared to a commercial GDL (Toray TGP-H-60) at highly humidified operating conditions. The ohmic resistance of the fuel cell is found to significantly increase with increasing inter-fiber distance. It is also observed that the addition of a hydrophobic treatment enhances membrane hydration, and fibres perpendicularly aligned to the channel direction may enhance the contact area between the catalyst layer and the GDL.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Gas diffusion layer for proton exchange membrane fuel cells—a review10.1016/j.jpowsour.2009.04.005 ↗
2. Characterization of PEMFC gas diffusion layer porosity10.1149/2.0921506jes ↗
3. Feasibility of combining electrochemical impedance spectroscopy and synchrotron X-ray radiography for determining the influence of liquid water on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2015.10.008 ↗
4. Balancing mass transport resistance and membrane resistance when tailoring MPL thickness for PEM fuel cells10.1016/j.electacta.2015.11.115 ↗
5. In operando measurements of liquid water saturation distributions and effective diffusivities of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2016.05.180 ↗
6. Synchrotron investigation of microporous layer thickness on liquid water distribution in a PEM fuel cell10.1149/2.0221507jes ↗
7. Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs10.1016/j.jpowsour.2012.11.006 ↗
8. Unstructured pore network modeling with heterogeneous PEMFC GDL porosity distributions10.1149/1.3486095 ↗
9. Investigating inlet condition effects on PEMFC GDL liquid water transport through pore network modeling10.1149/2.0191507jes ↗
10. Random pore network modeling of fibrous PEMFC gas diffusion media using voronoi and delaunay tessellations10.1149/2.009308jes ↗
11. Numerical models and experiments on immiscible displacements in porous media10.1017/S0022112088000953 ↗
12. Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells10.1016/j.ijheatmasstransfer.2013.12.059 ↗
13. Saturation dependent effective transport properties of PEFC gas diffusion layers10.1149/2.005209jes ↗
14. Electrospinning jets and polymer nanofibers10.1016/j.polymer.2008.02.002 ↗
15. Nanometre diameter fibres of polymer, produced by electrospinning10.1088/0957-4484/7/3/009 ↗
16. Electrospinning: a fascinating method for the preparation of ultrathin fibers10.1002/anie.200604646 ↗
17. A review of electrospun carbon fibers as electrode materials for energy storage10.2174/1385272811317130006 ↗
18. A review: carbon nanofibers from electrospun polyacrylonitrile and their applications10.1007/s10853-013-7705-y ↗
19. Carbon nanofibers prepared via electrospinning10.1002/adma.201104940 ↗
20. Diffusion media materials and characterisation
21. Controlled formation of poly(ε-caprolactone) ultrathin electrospun nanofibers in a hydrolytic degradation-assisted process10.1016/j.eurpolymj.2013.02.038 ↗
22. Mapping the influence of solubility and dielectric constant on electrospinning polycaprolactone solutions10.1021/ma300656u ↗
23. Collecting electrospun nanofibers with patterned electrodes10.1021/nl0504235 ↗
24. Structuring and molding of electrospun nanofibers: effect of electrical and topographical local properties of micro-patterned collectors10.1002/mame.201100327 ↗
25. Electrospinning of three-dimensional nanofibrous tubes with controllable architectures10.1021/nl801667s ↗
26. Human mesenchymal stem-cell behaviour on direct laser micropatterned electrospun scaffolds with hierarchical structures10.1002/mabi.201200318 ↗
27. Hierarchical structures by wetting porous templates with electrospun polymer fibers10.1021/mz200008e ↗
28. Electrospun fibrous scaffolds with multiscale and photopatterned porosity10.1002/mabi.200900363 ↗
29. The effect of processing variables on the morphology of electrospun nanofibers and textiles10.1016/S0032-3861(00)00250-0 ↗
30. Self-assembly of electrospun polymer nanofibers: a general phenomenon generating honeycomb-patterned nanofibrous structures10.1021/la1047936 ↗
31. From self-assembly of electrospun nanofibers to 3D cm thick hierarchical foams10.1039/c2sm27543k ↗
32. Simultaneous electrospinning and electrospraying: a straightforward approach for fabricating hierarchically structured composite membranes10.1021/am402676m ↗
33. Continuous electrospinning of aligned polymer nanofibers onto a wire drum collector10.1021/nl0486158 ↗
34. Morphologically controlled fuel cell transport layers enabled via electrospun carbon nonwovens10.1016/j.jpowsour.2014.09.095 ↗
35. Synthesis of transport layers with controlled anisotropy and application thereof to study proton exchange membrane fuel cell performance10.1016/j.jpowsour.2016.02.031 ↗
36. Influence of anisotropic bending stiffness of gas diffusion layers on the electrochemical performances of polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2010.08.061 ↗
37. Transport properties of electrospun fibrous membranes with controlled anisotropy10.1016/j.memsci.2014.09.017 ↗
38. Performance and liquid water distribution in PEFCs with different anisotropic fiber directions of the GDL10.1016/j.jpowsour.2010.10.080 ↗
39. Effects of anisotropic bending stiffness of gas diffusion layer on the MEA degradation of polymer electrolyte membrane fuel cells by wet/dry gas10.1016/j.ijhydene.2013.09.043 ↗
40. Influence of local carbon fibre orientation on the water transport in the gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.elecom.2014.12.013 ↗
41. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell10.1016/j.electacta.2004.04.009 ↗
42. Engineered water highways in fuel cells: radiation grafting of gas diffusion layers10.1002/adma.201503557 ↗
43. New method for super hydrophobic treatment of gas diffusion layers for proton exchange membrane fuel cells using electrochemical reduction of diazonium salts10.1021/acsami.5b04428 ↗
44. Perfluoropolyether-functionalized gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2014.02.025 ↗
45. Design of properties and performances of innovative gas diffusion media for polymer electrolyte membrane fuel cells10.1016/j.porgcoat.2014.05.028 ↗
46. Effects of polytetrafluoroethylene treatment and compression on gas diffusion layer microstructure using high-resolution X-ray computed tomography10.1016/j.jpowsour.2014.05.004 ↗
47. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs I. PTFE effect10.1149/1.3594578 ↗
48. CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies10.1016/j.jpowsour.2006.03.066 ↗
49. Hydrophobic gas-diffusion media for polymer-electrolyte fuel cells by direct fluorination10.1149/2.0411514jes ↗
50. Van Der Voort · Silylation Silica Surf. A Rev. · 1996
51. Alkylchlorosilane reactions at the silica surface10.1016/0927-7757(95)03298-5 ↗
52. Chemical vapor surface modification of porous glass with fluoroalkyl-functional silanes. 1. Characterization of the molecular layer10.1021/la00017a025 ↗
53. Chemical vapor surface modification of porous glass with fluoroalkyl-functionalized silanes. 2. Resistance to water10.1021/la00001a025 ↗
54. Encoding complex wettability patterns in chemically functionalized 3D photonic crystals10.1021/ja2053013 ↗
55. An experimental study of the liquid water saturation level in the cathode gas diffusion layer of a PEM fuel cell10.1016/j.jpowsour.2011.09.036 ↗
56. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
57. Modeling of proton exchange membrane fuel cell performance with an empirical equation10.1149/1.2050072 ↗
58. Barbir · 2013
59. 2010
60. Electrochemical performances of polyacrylonitrile nanofiber-based nonwoven separator for lithium-ion battery10.1149/1.2730727 ↗
61. Fabrication of polymer-converted carbon films containing Ag, Pd nanoparticles10.1088/0957-4484/15/12/011 ↗
62. A review of electrospun carbon fibers as electrode materials for energy storage10.2174/1385272811317130006 ↗
63. Electrode Base Mater. Fuel Cell Phys. Prop. Table · 2016
64. A technical review on gas diffusion, mechanism and medium of PEM fuel cell
65. Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties10.1016/j.polymer.2009.04.058 ↗
66. Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: part II. In operando synchrotron imaging for microscale liquid water transport characterization10.1016/j.jpowsour.2017.01.114 ↗