Structural and electrochemical analysis of Zn doped Na3Ni2SbO6 cathode for Na-ion battery
Source abstract
Abstract
Abstract The effect of Zn 2+ substitution on the electrochemical performance and the structural evolution upon cycling of Na 3 Ni 2 SbO 6 and Na 3 Zn 0.5 Ni 1.5 SbO 6 is reported. Samples were synthesized by solid state route and characterised by ex-situ X-ray diffraction and ex-situ 23 Na solid state NMR, the results show that the partial substitution of Ni 2+ by Zn 2+ alters the superstructure symmetry and leads to a disordered lattice. This structural reorganisation has direct consequences on the electrochemical performances of Na 3 Zn 0.5 Ni 1.5 SbO 6 with an average voltage of ∼3.3 V and with a specific capacity increase up to 145 mAh.g −1 at C/10. We observe that Zn 2+ cations are inhomogeneously distributed in the structure, leading to different Na + environments which are characterized by NMR. The phase transitions observed at high voltage in Na 3 Ni 2 SbO 6 are suppressed in Na 3 Ni 1.5 Zn 0.5 SbO 6 resulting in a smooth electrochemical profile with a low polarization. The presence of an irreversible phase at the end of the discharge was also detected in the undoped material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
3. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
4. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
5. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
6. Research development on sodium-ion batteries10.1021/cr500192f ↗
7. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
8. Ambient temperature cycling of an Na - TiS2 cell10.1149/1.2129353 ↗
9. A study of the Na x TiO2 system by electrochemical deintercalation10.1007/BF00658014 ↗
10. Comportement electrochimique des phases NaxCoO210.1016/0025-5408(80)90199-3 ↗
11. Electrochemical intercalation of sodium in NaxCoO2 bronzes10.1016/0167-2738(81)90076-X ↗
12. LixCoO2 (0<x<-1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
13. Electrochemical intercalation and deintercalation of NaxMnO2bronzes10.1016/0022-4596(85)90194-X ↗
14. Manganese oxides for lithium batteries10.1016/S0079-6786(97)81003-5 ↗
15. A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries10.1039/C4EE03192J ↗
16. Electrochemical properties of monoclinic NaNiO210.1149/2.023302jes ↗
17. Electrochemistry and structural chemistry of LiNiO2 (R3̅m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
18. Alkali metal-nickel oxides of the type MNiO210.1021/ja01635a012 ↗
19. Electrochemically reversible sodium intercalation of layered NaNi0.5Mn0.5O2 and NaCrO210.1149/1.3112727 ↗
20. Layered Na[Ni1/3Fe1/3Mn1/3]O2 cathodes for Na-ion battery application10.1016/j.elecom.2012.02.020 ↗
21. A quinary layer transition metal oxide of NaNi1/4Co1/4Fe1/4Mn1/8Ti1/8O2 as a high-rate-capability and long-cycle-life cathode material for rechargeable sodium ion batteries
22. A new family of fast sodium ion conductors: Na2M2TeO6 (M = Ni, Co, Zn, Mg)10.1021/cm102629g ↗
23. Studies on solid solutions based on layered honeycomb-ordered phases P2-Na2M2TeO6 (M=Co, Ni, Zn)10.1016/j.jssc.2012.06.022 ↗
24. Structure and basic magnetic properties of the honeycomb lattice compounds Na2Co2TeO6 and Na3Co2SbO610.1016/j.jssc.2007.01.002 ↗
25. A honeycomb-layered Na3Ni2SbO6: a high-rate and cycle-stable cathode for sodium-ion batteries10.1002/adma.201401946 ↗
26. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
27. Goodenough, Na2Ni2TeO6: evaluation as a cathode for sodium battery10.1016/j.jpowsour.2013.06.073 ↗
28. Study on the reversible electrode reaction of Na1–xNi0.5Mn0.5O2 for a rechargeable sodium-ion battery10.1021/ic300357d ↗
29. Ordered and disordered polymorphs of Na(Ni2/3Sb1/3)O2: honeycomb-ordered cathodes for Na-Ion batteries10.1021/cm504339y ↗
30. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
31. New O2/P2-type Li-Excess layered manganese oxides as promising multi-functional electrode materials for rechargeable Li/Na batteries10.1002/aenm.201301453 ↗
32. Mixed oxides of sodium, antimony (5+) and divalent metals (Ni, Co, Zn or Mg)10.1016/j.jssc.2009.12.002 ↗
33. Formation of honeycomb ordered monoclinic Li2M2TeO6 (M = Cu, Ni) and disordered orthorhombic Li2Ni2TeO6 oxides10.1039/c3dt51604k ↗
34. Applied to the study of electrode materials for lithium batteries10.1021/cr800344k ↗
35. Raman spectroscopy of smithsonite10.1002/jrs.1835 ↗
36. Ex situ and in situ Raman microscopic investigation of the differences between stoichiometric LiMO2 and high-energy xLi2MnO3•(1–x)LiMO2 (M = Ni, Co, Mn)10.1016/j.electacta.2014.03.004 ↗
37. Wasylishen · 2012
38. Nmr studies of cathode materials for lithium-ion rechargeable batteries10.1021/cr020734p ↗
39. Synthesis and characterization of pure P2- and O3-Na2/3Fe2/3Mn1/3O2 as cathode materials for Na ion batteries10.1039/C4TA03991B ↗
40. Study of the transition metal ordering in layered naxnix/2Mn1–x/2O2 (2/3 ≤x ≤ 1) and consequences of Na/Li exchange10.1021/ic400579w ↗
41. Intermediate honeycomb ordering to trigger oxygen redox chemistry in layered battery electrode10.1038/ncomms11397 ↗