A selective hybrid stochastic strategy for fuel-cell multi-parameter identification
Source abstract
Abstract
Abstract The in situ identification of fuel-cell material parameters is crucial both for guiding the research for advanced functionalized materials and for fitting multiphysics models, which can be used in fuel cell performance evaluation and optimization. However, this identification still remains challenging when dealing with direct measurements. This paper presents a method for achieving this aim by stochastic optimization. Such techniques have been applied to the analysis of fuel cells for ten years, but typically to specific problems and by means of semi-empirical models, with an increased number of articles published in the last years. We present an original formulation that makes use of an accurate zero-dimensional multi-physical model of a polymer electrolyte membrane fuel cell and of two cooperating stochastic algorithms, particle swarm optimization and differential evolution, to extract multiple material parameters (exchange current density, mass transfer coefficient, diffusivity, conductivity, activation barriers …) from the experimental data of polarization curves (i.e. in situ measurements) under some controlled temperature, gas back pressure and humidification. The method is suitable for application in other fields where fitting of multiphysics nonlinear models is involved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
2. Multi-physic 3D dynamic modelling of polymer membranes with a proper generalized decomposition model reduction approach10.1016/j.electacta.2011.07.019 ↗
3. A dynamic circuit model of a small direct methanol fuel cell for portable electronic devices10.1109/TIE.2009.2027916 ↗
4. Ex situ and in situ stability studies of PEMFC catalysts effect of carbon type and humidification on degradation of the carbon10.1149/1.2097361 ↗
5. AC impedance technique in PEM fuel cell diagnosis-A review10.1016/j.ijhydene.2007.05.036 ↗
6. Cross-laboratory experimental study of non-noble-metal electrocatalysts for the oxygen reduction reaction10.1021/am900219g ↗
7. Water management studies in PEM fuel cells, Part I: fuel cell design and in situ water distributions10.1016/j.ijhydene.2008.12.100 ↗
8. Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers10.1016/j.jpowsour.2006.09.045 ↗
9. In situ high-resolution neutron radiography of cross-sectional liquid water profiles in proton exchange membrane fuel cells10.1149/1.2826287 ↗
10. Bellman · 1957
11. Schrijver · 1998
12. Bazaraa · 2005
13. No free-lunch theorems for optimization10.1109/4235.585893 ↗
14. Stochastic methods for parameter estimation of multiphysics models of fuel cells10.1109/TMAG.2013.2283889 ↗
15. Modeling the performance of H2-O2 unitized regenerative PEM fuel cells for energy storage10.1016/j.jpowsour.2015.07.067 ↗
16. Bard · 2006
17. NIST Chemistry WebBook - Standard Reference Database Number 69. http://webbook.nist.gov/chemistry/.
18. O'Hayre · 2009 · 195
19. Development of nano-electrocatalysts based on carbon nitride supports for the ORR Processes in PEM Fuel Cells10.1016/j.electacta.2009.11.032 ↗
20. Temperature dependence of the electrode kinetics of oxygen reduction at the platinum/Nafion® interface – a microelectrode investigation10.1149/1.2221258 ↗
21. A two-phase flow and transport model for the cathode of PEM fuel cells10.1016/S0017-9310(01)00322-2 ↗
22. Kays · 1993
23. Mench · 2008
24. Polymer electrolytes for a hydrogen economy10.1016/j.ijhydene.2012.01.080 ↗
25. Polymer electrolyte fuel cell models10.1149/1.2085971 ↗
26. Dielectric relaxations and conductivity mechanism of Nafion: studies based on broadband dielectric spectroscopy10.1149/1.2981960 ↗
27. Sequeira · 2010 · 219
28. A formalism relating the conductivity of functionalized nanoparticles to constituent ligand molecules and application to water-containing silica10.1039/b924811k ↗
29. In situ diagnostics for water transport in proton exchange membrane fuel cells10.1016/j.pecs.2010.06.001 ↗
30. Local measurements of hydrogen crossover rate in polymer electrolyte membrane fuel cells10.1016/j.apenergy.2012.06.034 ↗
31. The effect of hydrogen crossover on open-circuit voltage in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.10.023 ↗
32. Systematic parameter estimation for PEM fuel cell models10.1016/j.jpowsour.2004.12.024 ↗
33. Multiphysics DC and AC models of a PEMFC for the detection of degraded cell parameters10.1016/j.ijhydene.2013.04.057 ↗
34. Online identification of semi-empirical model parameters for PEMFCs10.1016/j.ijhydene.2014.10.045 ↗
35. Modeling a PEMFC by a support vector machine10.1016/j.jpowsour.2006.01.040 ↗
36. Modeling and control of PEMFC based on least squares support vector machines10.1016/j.enconman.2005.04.002 ↗
37. Online diagnosis of PEMFC by combining support vector machine and fluidic model10.1002/fuce.201300197 ↗
38. Numerical optimization of proton exchange membrane fuel cell cathodes10.1016/j.electacta.2006.09.049 ↗
39. Design for geometric parameters of PEM fuel cell by integrating computational fluid dynamics code with optimization method10.1016/j.jpowsour.2006.12.040 ↗
40. Flow field optimization for proton Exchange membrane fuel cells with varying channel heights and widths10.1016/j.electacta.2009.04.051 ↗
41. Modeling, shape analysis and computation of the equilibrium pore shape near a PEM-PEM intersection10.1016/j.jmaa.2013.08.012 ↗
42. A review on model-based diagnosis methodologies for PEMFCs10.1016/j.ijhydene.2013.03.106 ↗
43. Validation of genetic algorithm results in fuel cell model
44. An adaptive RNA genetic algorithm for modeling of proton exchange membrane fuel cells10.1016/j.ijhydene.2012.10.026 ↗
45. Parameter identification for PEM fuel-cell mechanism model based on effective informed adaptive particle swarm optimization10.1109/TIE.2010.2060456 ↗
46. Equivalent circuit parameters estimation for PEM fuel cell using RBF neural network and enhanced Particle Swarm Optimization10.1155/2013/672681 ↗
47. Parameter optimization of the biohydrogen real time power generation system using differential evolution algorithm10.1016/j.ijhydene.2010.04.038 ↗
48. PEM fuel cell modeling using differential evolution10.1016/j.energy.2012.01.039 ↗
49. Classifier systems and genetic algorithms10.1016/0004-3702(89)90050-7 ↗
50. Particle swarm optimization
51. Storn · 1995
52. Differential evolution – a simple and efficient heuristic for global optimization over continuous spaces10.1023/A:1008202821328 ↗
53. An extensively valid and stable method for derivation of all parameters of a solar cell from a single current–voltage characteristic10.1063/1.2895396 ↗
54. An easy parameter estimation procedure for modeling a HT-PEMFC10.1016/j.ijhydene.2012.04.157 ↗
55. Application of current switching method to estimate the model parameters of proton exchange membrane fuel cell
56. Estimating equivalent circuit parameters of proton exchange membrane fuel cell using the current change method10.1016/j.ijepes.2013.05.031 ↗
57. Synthesis, studies and fuel cell performance of “core-shell” electrocatalysts for oxygen reduction reaction based on a PtNix carbon nitride “shell” and a pyrolyzed polyketone nanoball “core”10.1016/j.ijhydene.2013.08.054 ↗
58. New inorganic–organic proton conducting membranes based on Nafion® and [(ZrO2)·(SiO2)0.67] nanoparticles: synthesis vibrational studies and conductivity10.1016/j.jpowsour.2007.09.043 ↗