Silica decorated on porous activated carbon nanofiber composites for high-performance supercapacitors
Source abstract
Abstract
Abstract A hybrid of silica decorated on porous activated carbon nanofibers (ACNFs) is fabricated in the form of a web via electrospinning and an activation process as an electrode material for electrochemical capacitors in an organic electrolyte. The introduction of PhSiH 3 (PS) into the polyacrylonitrile (PAN) solution induces a porous ACNF structure containing silica nanoparticles (NPs) via the spontaneous sol-gel process of PS by steam in the subsequent physical activation process. These inorganic-organic hybrid composites of porous ACNF containing silica NPs show superior specific capacitance and energy density in electrochemical tests, along with good rate capability and excellent cycle life in an organic electrolyte, which is attributed to the combination of ACNF's high surface area and silica's hydrophilicity. The electrochemical performance decreases with increasing PS concentration, and this trend is consistent with the specific surface area results, which reveal the rapid formation of a double layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Energy storage in electrochemical capacitors: designing functional materials to improve performance10.1039/c0ee00004c ↗
2. Synthesis of a graphene/polyaniline/MCM-41 nanocomposite and its application as a supercapacitor10.1039/c3nj00108c ↗
3. Effect of reduced graphene oxide-silica composite in polyaniline: electrode material for high-performance supercapacitor10.1007/s10008-015-2978-5 ↗
4. Face-to-face self-assembly graphene/MnO2 nanocomposites for supercapacitor applications using electrochemically exfoliated graphene10.1016/j.electacta.2015.03.098 ↗
5. Fabrication of three-dimensional porous graphene-manganese dioxide composites as electrode materials for supercapacitors10.1016/j.colsurfa.2014.10.043 ↗
6. Organic-inorganic nanocomposite polymer electrolyte membranes for fuel cell applications10.1016/j.progpolymsci.2010.12.005 ↗
7. Novel organic-inorganic poly (3,4-ethylenedioxythiophene) based nanohybrid materials for rechargeable lithium batteries and supercapacitors10.1016/j.jpowsour.2006.04.033 ↗
8. Fiber mats of poly(vinyl alcohol)/silica composite via Electrospinning10.1016/S0167-577X(02)01036-4 ↗
9. Studies on the performances of silica aerogel electrodes for the application of supercapacitor10.1007/s11581-009-0315-7 ↗
10. Improvement of electrochemical capacitor electrodes using SiO2 nanoparticles10.1016/j.electacta.2011.08.116 ↗
11. Free-standing highly ordered mesoporous carbon-silica composite thin films10.1039/c3ta12925j ↗
12. Polyacrylonitrile-based nanofibers-A state-of-the-art review10.1016/j.progpolymsci.2011.07.001 ↗
13. Chung · 1994
14. Chemical structure evolution and mechanism during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350–600 °C10.1016/j.polymdegradstab.2007.05.020 ↗
15. High-energy radiation technique treat on the surface of carbon fiber10.1016/j.matchemphys.2005.05.007 ↗
16. Influence of KOH followed by oxidation pretreatment on the electrochemical performance of phenolic based activated carbon fibers10.1016/j.jelechem.2007.09.003 ↗
17. Structural, compositional and electrical characterization of Si-rich SiOx layers suitable for application in light sensors10.1016/j.mssp.2015.03.040 ↗
18. XPS study of the surface chemical state of a Pd/(SiO2+TiO2) catalyst after methane oxidation and SO2 treatment10.1016/j.jcat.2014.01.008 ↗
19. Influence of heat treatment on physical-chemical properties of PAN-based carbon fiber10.1016/j.ceramint.2005.02.014 ↗
20. Dry sol-gel polycondensation of hydrosilanes to organosilicas catalyzed by colloidal nickel nanoparticles10.1166/jnn.2007.084 ↗
21. Pore structure analysis of activated carbon fiber by microdomain-based model10.1021/la9000347 ↗
22. Hierarchical porous carbons with controlled micropores and mesopores for supercapacitor electrode materials10.1016/j.carbon.2008.07.018 ↗
23. Fabrication of mesoporous polymer/silica hybrid using surfactant-mediated sol-gel method10.1016/j.jnoncrysol.2006.08.013 ↗
24. Charge storage mechanism of MnO2 electrode used in aqueous electrochemical capacitor10.1021/cm049649j ↗
25. Hollow SnO2@Co3O4 core-shell spheres encapsulated in three dimensional graphene foams for high performance supercapacitors and lithium-ion batteries10.1016/j.jpowsour.2015.08.043 ↗
26. Sulfur and phosphorus co-doping of hierarchically porous graphene aerogels for enhancing supercapacitor performance10.1016/j.carbon.2016.01.073 ↗
27. Free-standing boron and oxygen co-doped carbon nanofiber films for large volumetric capacitance and high rate capability supercapacitors10.1016/j.nanoen.2015.04.017 ↗
28. The electrochemical capacitive behaviors of NiO nanoparticles10.1016/j.electacta.2014.01.144 ↗
29. Facile sonochemical synthesis of nanostructured NiO with different particle sizes and its electrochemical properties for supercapacitor application10.1016/j.jcis.2016.03.013 ↗
30. A facile low-temperature synthesis of highly distributed and size-tunable cobalt oxide nanoparticles anchored on activated carbon for supercapacitors10.1016/j.jpowsour.2014.09.168 ↗