journal article·2013-12

Effect of mixing method on the properties of composite cathodes for all-solid-state lithium batteries using Li2S–P2S5 solid electrolytes

Junghoon Kim, Minyong Eom, Sungwoo Noh, Dongwook Shin

Publisher page

Abstract

Abstract Composite cathodes comprising the solid powders of LiCoO 2 , electrolyte and Super P carbon are prepared using three different mixing methods to apply to all-solid-state lithium batteries, and their morphological and electrochemical properties are compared. By applying the wet-mixing method, composite cathodes with greater homogenous distribution of solid particles are obtained when compared to those prepared by dry-mixing. As a result of this favorable feature, a higher discharge capacity of 84 mAh g −1 and a capacity retention of 73% are maintained at the 50th cycle in the all-solid-state cell using the composite cathode prepared by wet-mixing with a ball mixer, which resulted from the smaller interfacial resistance for the intercalation/deintercalation of the Li ions in this composite cathode. This is determined to be due to the homogenous distribution of the constituent particles leading to significantly reduced electrode polarization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Hayashi · J. Non-cryst. Solids · 2009 · 355 · 191910.1016/j.jnoncrysol.2008.12.020 ↗
2. Hayashi · J. Non-cryst. Solids · 2010 · 356 · 267010.1016/j.jnoncrysol.2010.04.048 ↗
3. Kamaya · Nat. Mater. · 2011 · 10 · 68210.1038/nmat3066 ↗
4. Adams · J. Mater. Chem. · 2012 · 22 · 768710.1039/c2jm16688g ↗
5. Mizuno · J. Power Sources · 2005 · 146 · 71110.1016/j.jpowsour.2005.03.161 ↗
6. Sakuda · J. Power Sources · 2010 · 195 · 59910.1016/j.jpowsour.2009.07.037 ↗
7. Yersak · J. Power Sources · 2011 · 196 · 983010.1016/j.jpowsour.2011.07.059 ↗
8. Kim · J. Power Sources · 2011 · 196 · 692010.1016/j.jpowsour.2010.12.020 ↗
9. Kim · Electron. Mater. Lett. · 2012 · 8 · 20910.1007/s13391-012-2037-7 ↗
10. Hong · J. Power Sources · 2002 · 111 · 9010.1016/S0378-7753(02)00264-1 ↗
11. Sakuda · J. Electrochem. Soc. · 2009 · 156 · A2710.1149/1.3005972 ↗
12. Ohta · Adv. Mater. · 2006 · 18 · 222610.1002/adma.200502604 ↗
13. Ohta · Electrochem. Commun. · 2007 · 9 · 148610.1016/j.elecom.2007.02.008 ↗
14. Sakuda · Chem. Mater. · 2010 · 22 · 94910.1021/cm901819c ↗
15. Zhang · J. Power Sources · 2000 · 91 · 12210.1016/S0378-7753(00)00469-9 ↗
16. Dong · Mater. Chem. Phys. · 2009 · 115 · 24510.1016/j.matchemphys.2008.11.063 ↗