journal article·2010-03

Effects of anode air bleeding on the performance of CO-poisoned proton-exchange membrane fuel cells

Lung-Yu Sung, Bing-Joe Hwang, Kan-Lin Hsueh, Fang-Hei Tsau

Journal of Power Sources· Volume 195· Issue 6
Publisher page

Abstract

Abstract In the present work, the dynamic behavior of a PEM fuel cell under CO-poisoning and the effects of air bleeding on the recovery ratio are reported. Pt–Ru catalyst is used as the anode in a single cell and the hydrogen is pre-mixed with 53 ppm of CO as the fuel. The result indicates that even using a CO-tolerant catalyst, CO-poisoning cannot be avoided with the operating conditions in our study. About 80% of the output current is lost within 20 min. Upon anode air bleeding with 5% air, 90% of the current is recovered within 1 min. Higher air bleeding ratio only results in minor improvement of the cell performance. We have developed a transient model to estimate the current reduction due to CO-poisoning and to evaluate the amount of air bleeding needed for a given recovery ratio. A long-term durability test has also been conducted using simulated reformatted gas, in which 1% O2 is injected into the fuel stream. After more than 3000 h, the cell voltage degradation is less than 3%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Choudhary · Catal. Today · 2002 · 77 · 6510.1016/S0920-5861(02)00233-X ↗
2. Galvita · Chem. Eng. J. · 2007 · 134 · 16810.1016/j.cej.2007.03.046 ↗
3. Cheekatamarla · J. Power Sources · 2005 · 147 · 17810.1016/j.jpowsour.2005.01.027 ↗
4. Adams · J. Power Sources · 2005 · 145 · 5510.1016/j.jpowsour.2004.12.049 ↗
5. Murthy · J. Electrochem. Soc. · 2003 · 150 · 2910.1149/1.1522383 ↗
6. Zhang · J. Electrochem. Soc. · 2002 · 149 · 76510.1149/1.1475686 ↗
7. Lee · Electrochim. Acta · 1999 · 44 · 328310.1016/S0013-4686(99)00052-3 ↗
8. Qi · J. Power Sources · 2003 · 113 · 11510.1016/S0378-7753(02)00489-5 ↗
9. Yu · J. Power Sources · 2002 · 105 · 5210.1016/S0378-7753(01)00957-0 ↗
10. Divisek · Electrochim. Acta · 1998 · 43 · 381110.1016/S0013-4686(98)00140-6 ↗
11. Gottesfeld · J. Electrochem. Soc. · 1988 · 135 · 265110.1149/1.2095401 ↗
12. Shi · J. Power Sources · 2007 · 174 · 16410.1016/j.jpowsour.2007.08.092 ↗
13. Inaba · J. Power Sources · 2008 · 178 · 69910.1016/j.jpowsour.2007.08.040 ↗
14. Springer · J. Electrochem. Soc. · 2001 · 148 · A1110.1149/1.1344516 ↗
15. Bhatia · Electrochim. Acta · 2004 · 49 · 233310.1016/j.electacta.2004.01.014 ↗
16. Baschuk · Int. J. Energy Res. · 2003 · 27 · 109510.1002/er.934 ↗
17. Zamel · Int. J. Hydrogen Energy · 2008 · 33 · 133510.1016/j.ijhydene.2007.12.060 ↗
18. Chu · J. Power Sources · 2006 · 159 · 107110.1016/j.jpowsour.2005.12.045 ↗
19. Wang · J. Power Sources · 2006 · 159 · 102510.1016/j.jpowsour.2005.12.004 ↗
20. Wang · J. Power Sources · 2007 · 170 · 23510.1016/j.jpowsour.2007.03.070 ↗
21. Chan · Electrochim. Acta · 2003 · 48 · 190510.1016/S0013-4686(03)00269-X ↗
22. Brett · Int. J. Hydrogen Energy · 2007 · 32 · 86310.1016/j.ijhydene.2007.01.019 ↗
23. Farrell · J. Power Sources · 2007 · 171 · 28210.1016/j.jpowsour.2007.07.006 ↗