Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part I: Microstructure optimization
Source abstract
Abstract
The main drawback of Ni/YSZ anode supports for solid oxide fuel cell application is their low tolerance to reducing and oxidizing (RedOx) atmosphere changes, owing to the Ni/NiO volume variation. This work describes a structured approach based on design of experiments for optimizing the microstructure for RedOx stability enhancement. A full factorial hypercube design and the response surface methodology are applied with the variables and their variation range defined as: (1) NiO proportion (40-60 wt% of the ceramic powders), (2) pore-former proportion (0-30 wt% corresponding to 0-64 vol.%), (3) NiO particle size (0.5-8 mu m) and (4) 8YSZ particle size (0.6-9 mu m).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Singhal · 2003
2. Faes · J. Power Sources · 2009 · 193 · 5510.1016/j.jpowsour.2008.12.118 ↗
3. Klemensoe · 2005
4. Sarantaridis · 2006 · P0728
5. Wuillemin · J. Fuel Cell Sci. Technol. · 2008 · 5 · 011016110.1115/1.2784333 ↗
6. Waldbillig · Solid State Ionics · 2005 · 176 · 84710.1016/j.ssi.2004.12.002 ↗
7. Pihlatie · J. Power Sources · 2009 · 193 · 32210.1016/j.jpowsour.2008.11.140 ↗
8. Jiang · J. Mater. Sci. · 2004 · 39 · 440510.1023/B:JMSC.0000034135.52164.6b ↗
9. Dees · J. Electrochem. Soc. · 1987 · l34 · 214110.1149/1.2100839 ↗
10. Lee · Solid State Ionics · 2002 · 148 · 1510.1016/S0167-2738(02)00050-4 ↗
11. Simwonis · Solid State Ionics · 2000 · 132 · 24110.1016/S0167-2738(00)00650-0 ↗
12. Faes · Fuel cells · 2009 · 9 · 84110.1002/fuce.200800147 ↗
13. Fischer · 1925
14. Fischer · 1935
15. Box · 2005
16. Myers · 2009
17. Wang · J. Therm. Spray Technol. · 2008 · 17 · 69210.1007/s11666-008-9227-8 ↗
18. Rajaram · Int. J. Manuf. Res. · 2008 · 3 · 35010.1504/IJMR.2008.019215 ↗
19. Wahdame · IEEE Trans. Energy Convers. · 2008 · 23 · 109310.1109/TEC.2008.2001449 ↗
20. 1973
21. Cleland · Ind. Eng. Chem. Res. · 1944 · 16 · 161
22. Van herle · J. Eur. Ceram. Soc. · 2001 · 21 · 185510.1016/S0955-2219(01)00130-3 ↗
23. Simwonis · J. Mater. Process. Technol. · 1999 · 92–93 · 10710.1016/S0924-0136(99)00214-9 ↗
24. Bowen · J. Dispers. Sci. Technol. · 2002 · 23 · 63110.1081/DIS-120015368 ↗
25. Radovic · Acta Mater. · 2004 · 52 · 574710.1016/j.actamat.2004.08.023 ↗
26. Clemmer · Solid State Ionics · 2009 · 180 · 72110.1016/j.ssi.2009.02.030 ↗
27. Baumgartner · J. Electrochem. Soc. · 1984 · 131 · 221710.1149/1.2115228 ↗
28. Costamagna · Electrochim. Acta · 1998 · 43 · 37510.1016/S0013-4686(97)00063-7 ↗
29. Luebbe · Solid State Ionics · 2009 · 180 · 80510.1016/j.ssi.2009.01.010 ↗
30. Wei · J. Electrochem. Soc. · 2005 · 152 · C51310.1149/1.1938027 ↗
31. A. Muller, PhD Thesis, Fakultät für Elektotechnik und Informationstechnik, Universität Fridericiana zu Karlsruhe genehmigte, Karlsrhue, Germany, 2004.