journal article·2015-12Open access

Membrane patterned by pulsed laser micromachining for proton exchange membrane fuel cell with sputtered ultra-low catalyst loadings

S. Cuynet, A. Caillard, S. Kaya-Boussougou, T. Lecas, N. Semmar, J. Bigarré, P. Buvat, P. Brault

Abstract

Abstract Proton exchange membranes were nano- and micro-patterned on their cathode side by pressing them against stainless steel molds previously irradiated by a Ti:Sapphire femtosecond laser. The membranes were associated to ultra-low loaded thin catalytic layers (25 μgPt cm−2) prepared by plasma magnetron sputtering. The Pt catalyst was sputtered either on the membrane or on the porous electrode. The fuel cell performance in dry conditions were found to be highly dependent on the morphology of the membrane surface. When nanometric ripples covered by a Pt catalyst were introduced on the surface of the membrane, the fuel cell outperformed the conventional one with a flat membrane. By combining nano- and micro-patterns (nanometric ripples and 11–24 μm deep craters), the performance of the cells was clearly enhanced. The maximum power density achieved by the fuel cell was multiplied by a factor of 3.6 (at 50 °C and 3 bar): 438 mW cm−2 vs 122 mW cm−2. This improvement is due to high catalyst utilization with a high membrane conductivity. When Pt is sputtered on the porous electrode (and not on the membrane), the contribution of the patterned membrane to the fuel cell efficiency was less significant, except in the presence of nanometric ripples. This result suggests that the patterning of the membrane must be consistent with the way the catalyst is synthesized, on the membrane or on the porous electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. High Performance plasma sputtered PdPt fuel cell electrodes with ultra low loading10.1016/j.ijhydene.2011.04.080 ↗
2. Plasma based platinum nanoaggregates deposited on carbon nanofibers improve fuel cell efficiency10.1063/1.2745210 ↗
3. Performance of plasma sputtered fuel cell electrodes with ultra-low Pt loadings10.1016/j.elecom.2009.02.012 ↗
4. S. Cuynet, A. Caillard, P. Brault, J. Bigarré, P. Buvat, High power impulse magnetron sputtering deposition of Pt inside fuel cell electrodes, J. Phys. D. Appl. Phys. Fast Track Communication, 47, 2014, 272001.10.1088/0022-3727/47/27/272001 ↗
5. Performance of proton exchange membrane fuel cell electrodes prepared by direct deposition of ultrathin platinum on the membrane surface10.1149/1.1392591 ↗
6. Novel catalysts, catalysts support and catalysts coated membrane methods
7. A sharp peak in the performance of sputtered platinum fuel cells at ultra-low platinum loading10.1016/S0378-7753(02)00238-0 ↗
8. Fabrication and performance test of a catalyst-coated membrane from direct spray deposition10.1016/j.ssi.2008.01.081 ↗
9. Improvement of direct methanol fuel cell performance by modifying catalyst coated membrane structure10.1016/j.elecom.2005.07.003 ↗
10. Modification of proton conducting membrane for reducing methanol crossover in direct-methanol fuel cell10.1016/S0378-7753(00)00602-9 ↗
11. Effects of platinum loading on performance of proton-exchange membrane fuel cells using surface-modified Nafion® membranes10.1016/j.jpowsour.2006.01.071 ↗
12. Surface modified Nafion® membrane by ion beam, bombardment for fuel cell applications10.1016/j.jpowsour.2005.05.040 ↗
13. Performance enhancement of membrane electrode assemblies with plasma etched polymer electrolyte membrane in PEM fuel cell10.1016/j.ijhydene.2010.07.175 ↗
14. Surface modification of nafion membranes using atmospheric-pressure low-temperature plasmas for electrochemical applications10.1002/ppap.200700108 ↗
15. Effect of micro-patterned membranes on the cathode performances for pem fuel cells under low humidity10.1149/2.085304jes ↗
16. Pillar structured membranes for suppressing cathodic concentration overvoltage in pemfcs at elevated temperature/low relative humidity10.1149/1.3502613 ↗
17. Nanoimprinted electrodes for micro-fuel cell applications10.1016/j.jpowsour.2007.01.026 ↗
18. Micro-patterned Nafion membranes for direct methanol fuel cell applications10.1016/j.memsci.2009.11.050 ↗
19. Microstructured membrane electrode assembly for direct methanol fuel cell10.1149/1.2767406 ↗
20. Electron beam assisted patterning and dry etching of nafion membranes10.1149/1.3615938 ↗
21. Electron beam patterned Nafion membranes for DMFC applications10.1016/j.jpowsour.2012.11.076 ↗
22. Fabrication of surface-patterned membranes by means of a zno nanorod templating method for polymer electrolyte membrane fuel-cell applications
23. Highly ordered and periodic mesoporous Nafion membranes via colloidal silica mediated self-assembly for fuel cells10.1039/c3cc42011f ↗
24. Molded, high surface area polymer electrolyte membranes from cured liquid precursors10.1021/ja064391e ↗
25. Membrane electrode assembly with enhanced membrane/electrode interface for proton exchange membrane fuel cells10.1021/jp306887p ↗
26. Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughen ss bearing steel10.1016/j.apsusc.2014.08.111 ↗
27. Genesis of femtosecond-induced nanostructures on solid surfaces10.1364/AO.53.000I10 ↗
28. Laser fluence dependence of periodic grating structures formed on metal surfaces under femtosecond laser pulse irradiation10.1103/PhysRevB.82.165417 ↗
29. Localization of platinum in low catalyst loading electrodes to attain high power densities in SPE fuel cells10.1149/1.2096240 ↗
30. Hirano · Electrochim. Acta · 1997 · 42 · 158710.1016/S0013-4686(96)00320-9 ↗
31. Colorizing metals with femtosecond laser pulses
32. Dependence of ablation threshold and LIPSS formation on copper thin films by accumulative UV picosecond laser shots10.1007/s00339-014-8255-0 ↗
33. A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells10.1016/j.ijhydene.2009.09.017 ↗
34. Wang · 2011 · 15–35 · 17