Effect of polyacrylonitrile on triethylene glycol diacetate-2-propenoic acid butyl ester gel polymer electrolytes with interpenetrating crosslinked network for flexible lithium ion batteries
Source abstract
Abstract
Abstract A new flexible gel polymer electrolytes (GPE) with interpenetrating cross-linked network is fabricated by blending long-chain polyacrylonitrile (PAN) polymer matrix and short-chain triethylene glycol diacetate-2-propenoic acid butyl ester (TEGDA-BA) framework, with the purpose of enhancing the mechanical stability of the GPE frameworks via synergistic effects of the linear polymers and crosslinked monomers. The as fabricated frameworks enable the liquid electrolytes to be firmly entrapped in the polymeric matrices, which significantly improves the mechanical bendability and interface stability of the resultant GPE. The GPE with 5 wt% PAN exhibits high ionic conductivity up to 5.9 × 10−3 S cm−1 at 25 °C with a stable electrochemical window observed (>5.0 V vs. Li/Li+). The Li|GPE|LiFePO4 half cells demonstrate remarkably stable capacity retention and rate ability during cycling tests. As expected, the LiFePO4|GPE|Li4Ti5O12 full cells also exhibit discharge capacity of 125.2 mAh g−1 coupled with high columbic efficiency greater than 98% after 100 cycles. The excellent mechanical flexibility and charge/discharge performance suggest that the GPE holds great application potential in flexible LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Nanostructured materials for electrochemical energy conversion and storage devices10.1002/adma.200800627 ↗
2. Progress in flexible lithium batteries and future prospects10.1039/C3EE43182G ↗
3. Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies10.1039/C4TA00716F ↗
4. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
5. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
6. Stable polymer electrolytes based on polyether-grafted ZnO nanoparticles for all-solid-state lithium batteries10.1039/b514346b ↗
7. Factors affecting cyclic durability of all-solid-state lithium polymer batteries using poly(ethylene oxide)-based solid polymer electrolytes10.1039/c0ee00266f ↗
8. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
9. Review on gel polymer electrolytes for lithium batteries10.1016/j.eurpolymj.2005.09.017 ↗
10. Design of poly(acrylonitrile)-based gel electrolytes for high-performance lithium ion batteries10.1021/am505448a ↗
11. Lithium ion conduction in ionic liquid-based gel polymer electrolyte10.1016/j.jpowsour.2007.10.063 ↗
12. Poly(ethylene oxide)-co-Poly(propylene oxide)-based gel electrolyte with high ionic conductivity and mechanical integrity for lithium-ion batteries10.1021/am4019115 ↗
13. Preparation and characterization of porous polyacrylonitrile membranes for lithium-ion polymer batteries10.1016/S0378-7753(03)00206-4 ↗
14. Preparation and electrochemical characterization of gel polymer electrolyte based on electrospun polyacrylonitrile nonwoven membranes for lithium batteries10.1016/j.jpowsour.2010.10.089 ↗
15. An Electrospun poly(vinylidene fluoride) nanofibrous membrane and its battery applications10.1002/adma.200304617 ↗
16. Characterization of electrospun PVDF fiber-based polymer electrolytes10.1021/cm060223+ ↗
17. Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion battery10.1039/C2EE23564A ↗
18. Unique core–shell structured SiO2 (Li+) nanoparticles for high-performance composite polymer electrolytes10.1039/C2TA00556E ↗
19. Effect of urea as pore-forming agent on properties of poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte10.1016/j.jpowsour.2013.11.110 ↗
20. Nanodispersed polymer gel electrolytes: conductivity modification with the addition of PMMA and fumed silica10.1016/j.ssi.2007.01.017 ↗
21. Self-supported poly (methyl methacrylate–acrylonitrile–vinyl acetate)-based gel electrolyte for lithium ion battery10.1016/j.jpowsour.2008.10.027 ↗
22. A novel polymer electrolyte with improved high-temperature-tolerance up to 170 °C for high-temperature lithium-ion batteries10.1016/j.jpowsour.2013.01.148 ↗
23. Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries10.1016/j.electacta.2014.04.053 ↗
24. A novel high-performance gel polymer electrolyte membrane basing on electrospinning technique for lithium rechargeable batteries10.1016/j.jpowsour.2011.04.062 ↗
25. Seamless integration of an elastomer with electrode matrix and its in-situ conversion into a solid state electrolyte for robust Li-ion batteries10.1002/adfm.201301124 ↗
26. Gel electrolyte derived from poly(ethylene glycol) blending poly(acrylonitrile) applicable to roll-to-roll assembly of electric double layer capacitors10.1002/adfm.201201342 ↗
27. Graphene based all-solid-state supercapacitors with ionic liquid incorporated polyacrylonitrile electrolyte10.1016/j.energy.2012.11.037 ↗
28. High performance of transferring lithium ion for polyacrylonitrile-interpenetrating crosslinked polyoxyethylene network as gel polymer electrolyte10.1021/am404248b ↗
29. Review on composite polymer electrolytes for lithium batteries10.1016/j.polymer.2006.05.069 ↗
30. Cycling characteristics of lithium powder polymer batteries assembled with composite gel polymer electrolytes and lithium powder anode10.1002/adfm.201200692 ↗
31. A novel solid composite polymer electrolyte based on poly(ethylene oxide) segmented polysulfone copolymers for rechargeable lithium batteries10.1016/j.memsci.2012.09.038 ↗
32. Effect of micro-sized SiO2-particle on the performance of PVDF blend membranes via TIPS10.1016/j.memsci.2010.05.023 ↗
33. High-modulus, high-conductivity nanostructured polymer electrolyte membranes via polymerization-induced phase separation10.1021/nl4034818 ↗
34. Study of a novel porous gel polymer electrolyte based on thermoplastic polyurethane/poly(vinylidene fluoride-co-hexafluoropropylene) by electrospinning technique10.1016/j.jpowsour.2014.03.140 ↗
35. A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning10.1039/c0ee00348d ↗
36. Polymer gel electrolytes based on oligomeric polyether/cross-linked PMMA blends prepared via in situ polymerization10.1016/j.elecom.2005.04.034 ↗
37. In situ prepared nano-crystalline TiO2-poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries10.1039/c3ta00086a ↗
38. Cycling performance of a lithium-ion polymer cell assembled by in-situ chemical cross-linking with fluorinated phosphorous-based cross-linking agent10.1016/j.jpowsour.2009.11.065 ↗
39. Novel polysilsesquioxane hybrid polymer electrolytes for lithium ion batteries10.1039/C3TA14290F ↗
40. Imprintable, bendable, and shape-conformable polymer electrolytes for versatile-shaped lithium-ion batteries10.1002/adma.201204182 ↗
41. Compliant polymer network-mediated fabrication of a bendable plastic crystal polymer electrolyte for flexible lithium-ion batteries10.1039/c3ta10368d ↗
42. Preparation of rechargeable lithium batteries with poly(methyl methacrylate) based gel polymer electrolyte by in situ γ-ray irradiation-induced polymerization10.1007/s10800-004-2726-5 ↗
43. Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives10.1039/c0cs00081g ↗
44. Investigation on modified natural rubber gel polymer electrolytes for lithium polymer battery10.1016/j.jpowsour.2013.01.002 ↗
45. A gel polymer electrolyte based on initiator-free photopolymerization for lithium secondary batteries10.1016/j.electacta.2011.10.072 ↗
46. Compliant gel polymer electrolyte based on poly(methyl acrylate-co-acrylonitrile)/poly(vinyl alcohol) for flexible lithium-ion batteries10.1016/j.electacta.2013.10.169 ↗
47. A shape-deformable and thermally stable solid state electrolyte based on a plastic crystal composite polymer electrolyte for flexible/safer lithium-ion batteries10.1039/C4TA00494A ↗
48. Interaction of silica nanoparticle/polymer nanocomposite cluster network structure: revisiting the reinforcement mechanism10.1021/jp400200s ↗
49. UV-curable semi-interpenetrating polymer network-integrated, highly bendable plastic crystal composite electrolytes for shape-conformable all-solid-state lithium ion batteries10.1039/c2ee03025j ↗
50. Preparation and electrochemical properties of gel polymer electrolytes using triethylene glycol diacetate-2-propenoic acid butyl ester copolymer for high energy density Lithium-ion batteries10.1016/j.jpowsour.2013.10.112 ↗
51. A strategy for scalable synthesis of Li4Ti5O12/reduced graphene oxide toward high rate lithium-ion batteries10.1016/j.elecom.2013.12.016 ↗
52. Effect of alumina on triethylene glycol diacetate-2-propenoic acid butyl ester composite polymer electrolytes for flexible lithium ion Batteries10.1016/j.jpowsour.2015.01.035 ↗
53. Electrochemical performance of trimethylolpropane trimethylacrylate-based gel polymer electrolyte prepared by in situ thermal polymerization10.1016/j.electacta.2012.11.090 ↗
54. Gel electrolytes based on an ether-abundant polymeric framework for high-rate and long-cycle life lithium ion batteries10.1039/C4TA01527D ↗
55. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
56. Stable lithium electrodeposition in liquid and nanoporous solid electrolytes10.1038/nmat4041 ↗
57. Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries10.1016/j.jpowsour.2007.11.110 ↗
58. Reduction of carbonate electrolytes and the formation of solid-electrolyte interface (SEI) in lithium-ion batteries. 1. Spectroscopic observations of radical intermediates generated in one-electron reduction of carbonates10.1021/jp406274e ↗
59. Bar · J. Phys. Chem. C · 2014 · 118 · 15910.1021/jp409533r ↗
60. Nanoscale LiFePO4 and Li4Ti5O12 for high rate Li-ion batteries10.1149/1.3223987 ↗