journal article·2021-11

Construction of solid solution sulfide embedded in MXene@N-doped carbon dual protection matrix for advanced aluminum ion batteries

Jiening Zheng, Shunlong Ju, Long Yao, Guanglin Xia, Xuebin Yu

Publisher page

Abstract

Abstract Engineering intriguing cathode electrode with desirable kinetics behaviors is imperative for boosting aluminum storage systems. Here, a MXene and N-doped carbon dually protected Ni0.6Co0.4S solid solution (Ni0.6Co0.4S@MXene@NC) composite is reported as the cathode material for AIBs. The dissolution of Ni into CoS lattice leads to the electronic rearrangement, tuning its binding interaction with the Al3+ and modifying the Al3+ diffusion barrier. Consequently, the Ni0.6Co0.4S renders the high overall Al3+ adsorbability, and contributes to fast Al3+ diffusion kinetics. Additionally, the robust MXene@NC protective shell not only provides faster electron transfer pathway, but also contributes to high chemical and structural stability, attributed to the inhibition of active species dissolution and favorable tolerance to volume change. This novel design enables the Ni0.6Co0.4S@MXene@NC composite a high initial discharge capacity of 481.2 mA h g−1 at 400 mA g−1. Even at 1000 mA g−1, the capacity still maintains at 125.2 mA h g−1 after 300 cycles. Meanwhile, the investigation of reaction mechanism reveals that the cell involves the intercalation of Al3+ into Ni0.6Co0.4S to generate AllNimConS and elemental Ni and Co. This work propels the process of enhancement of electrochemical performance for AIBs via smart designing and constructing cathode materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Sustainability and in situ monitoring in battery development10.1038/nmat4777 ↗
2. An all-integrated anode via interlinked chemical bonding between double-shelled–yolk-structured silicon and binder for lithium-ion batteries10.1002/adma.201703028 ↗
3. Emerging non-lithium ion batteries10.1016/j.ensm.2016.04.001 ↗
4. Yolk–shell structured FeP@C nanoboxes as advanced anode materials for rechargeable lithium-/potassium-ion batteries10.1002/adfm.201808291 ↗
5. An overview and future perspectives of aluminum batteries10.1002/adma.201601357 ↗
6. The rechargeable aluminum battery: opportunities and challenges10.1002/anie.201814031 ↗
7. An ultrafast rechargeable aluminium-ion battery10.1038/nature14340 ↗
8. Zeolite-templated carbon as an ordered microporous electrode for aluminum batteries10.1021/acsnano.6b07995 ↗
9. A binder-free and free-standing cobalt sulfide@carbon nanotube cathode material for aluminum-ion batteries10.1002/adma.201703824 ↗
10. Paving the path toward reliable cathode materials for aluminum-ion batteries10.1002/adma.201806510 ↗
11. A highly reversible Co3S4 microsphere cathode material for aluminum-ion batteries10.1016/j.nanoen.2018.11.045 ↗
12. One-dimensional Cu2–xSe nanorods as the cathode material for high-performance aluminum-ion battery10.1021/acsami.8b03259 ↗
13. Three-dimensional molybdenum diselenide helical nanorod arrays for high-performance aluminum-ion batteries10.1021/acsnano.0c02831 ↗
14. Decreasing the ion diffusion pathways for the intercalation of multivalent cations into one-dimensional TiS2 nanobelt arrays10.1021/acsami.9b21702 ↗
15. Hexagonal NiS nanobelts as advanced cathode materials for rechargeable Al-ion batteries10.1039/C6CC05974K ↗
16. Two-dimensionally porous cobalt sulfide nanosheets as a high-performance cathode for aluminum-ion batteries10.1016/j.jpowsour.2019.227147 ↗
17. Atomic interface engineering and electric-field effect in ultrathin Bi2MoO6 nanosheets for superior lithium ion storage10.1002/adma.201700396 ↗
18. Monolayer transition-metal dichalcogenide Mo1–xWxS2 Alloys as efficient anode materials for lithium-ion batteries10.1021/acs.jpcc.8b07876 ↗
19. Improving ionic/electronic conductivity of MoS2 Li-ion anode via manganese doping and structural optimization10.1016/j.cej.2019.04.203 ↗
20. Nickel-iron bimetallic diselenides with enhanced kinetics for high-capacity and long-life magnesium batteries10.1016/j.nanoen.2018.10.033 ↗
21. Promoting highly reversible sodium storage of iron sulfide hollow polyhedrons via cobalt incorporation and graphene wrapping
22. A novel vanadium-mediated MoS2 with metallic behavior for sodium ion batteries: achieving fast Na+ diffusion to enhance electrochemical kinetics
23. Stable CoSe2/carbon nanodice@reduced graphene oxide composites for high-performance rechargeable aluminum-ion batteries10.1039/C8EE00822A ↗
24. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC210.1002/adma.201102306 ↗
25. Applications of 2D MXenes in energy conversion and storage systems10.1039/C8CS00324F ↗
26. Strong surface-bound sulfur in carbon nanotube bridged hierarchical Mo2C-based MXene nanosheets for lithium–sulfur batteries10.1002/smll.201804338 ↗
27. K. Liang, R.A. Matsumoto, W. Zhao, N.C. Osti, I. Popov, B.P. Thapaliya, S. Fleischmann, S. Misra, K. Prenger, M. Tyagi, E. Mamontov, V. Augustyn, R.R. Unocic, A.P. Sokolov, S. Dai, P.T. Cummings, M. Naguib, Engineering the interlayer spacing by pre-intercalation for high performance supercapacitor MXene electrodes in room temperature ionic liquid, Adv. Funct. Mater. 2104007. https://doi.org/https://doi.org/10.1002/adfm.202104007.10.1002/adfm.202104007 ↗
28. Two-dimensional Ti3C2@CTAB-Se (MXene) composite cathode material for high-performance rechargeable aluminum batteries10.1016/j.cej.2020.125679 ↗
29. Interwoven MXene nanosheet/carbon-nanotube composites as Li–S cathode hosts10.1002/adma.201603040 ↗
30. Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium–sulfur batteries10.1002/anie.201410174 ↗
31. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
32. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
35. Mg Intercalation in layered and spinel host crystal structures for Mg batteries10.1021/acs.inorgchem.5b00188 ↗
36. Nondilute diffusion from first principles: Li diffusion in LixTiS210.1103/PhysRevB.78.104306 ↗
37. Evaluation of tavorite-structured cathode materials for lithium-ion batteries using high-throughput computing10.1021/cm200753g ↗
38. Atomic scale understanding of aluminum intercalation into layered TiS2 and its electrochemical properties10.1016/j.jechem.2019.09.003 ↗
39. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
40. Interfacial and electronic modulation via localized sulfurization for boosting lithium storage kinetics10.1002/adma.202000151 ↗
41. N-doped carbon-coated Ni1.8Co1.2Se4 nanoaggregates encapsulated in N-doped carbon nanoboxes as advanced anode with outstanding high-rate and low-temperature performance for sodium-ion half/full batteries10.1002/adfm.201805444 ↗
42. 3D carbon-coated MXene architectures with high and ultrafast lithium/sodium-ion storage10.1016/j.ensm.2020.04.016 ↗
43. Stabilizing the MXenes by carbon nanoplating for developing hierarchical nanohybrids with efficient lithium storage and hydrogen evolution capability10.1002/adma.201607017 ↗
44. Alkali-induced 3D crinkled porous Ti3C2 MXene architectures coupled with NiCoP bimetallic phosphide nanoparticles as anodes for high-performance sodium-ion batteries10.1039/C9EE00308H ↗
45. Self-assembly of transition metal oxide nanostructures on MXene nanosheets for fast and stable lithium storage10.1002/adma.201707334 ↗
46. Hierarchical NiS2 modified with bifunctional carbon for enhanced potassium-ion storage10.1002/adfm.201903454 ↗
47. Metal–organic frameworks as metal ion precursors for the synthesis of nanocomposites for lithium-ion batteries10.1002/anie.201915279 ↗
48. Ordered macro–microporous metal–organic framework single crystals and their derivatives for rechargeable aluminum-ion batteries10.1021/jacs.9b06957 ↗
49. Sulfur-rich (NH4)2Mo3S13 as a highly reversible anode for sodium/potassium-ion batteries10.1021/acsnano.0c00101 ↗
50. Amorphous MoS3 infiltrated with carbon nanotubes as an advanced anode material of sodium-ion batteries with large gravimetric, areal, and volumetric capacities10.1002/aenm.201601602 ↗
51. In situ N-doped carbon modified (Co0.5Ni0.5)9S8 solid-solution hollow spheres as high-capacity anodes for sodium-ion batteries10.1039/C9TA00709A ↗
52. Carbon-coated MoSe2/MXene hybrid nanosheets for superior potassium storage10.1021/acsnano.8b09548 ↗
53. Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry10.1016/j.nanoen.2020.104555 ↗
54. A novel aluminum-ion battery: Al/AlCl3-[EMIm]Cl/Ni3S2@Graphene10.1002/aenm.201600137 ↗
55. High-performance aluminum-ion battery with CuS@C microsphere composite cathode10.1021/acsnano.6b06446 ↗
56. An innovative freeze-dried reduced graphene oxide supported SnS2 cathode active material for aluminum-ion batteries10.1002/adma.201606132 ↗
57. Metal–organic framework-derived Co3O4@MWCNTs polyhedron as cathode material for a high-performance aluminum-ion battery10.1021/acssuschemeng.9b03159 ↗
58. Phosphorus-amine-based synthesis of nanoscale red phosphorus for application to sodium-ion batteries10.1021/acsnano.9b08282 ↗
59. Layered double hydroxides derived NiCo-sulfide as a cathode material for aluminum ion batteries10.1016/j.electacta.2020.136174 ↗
60. Flexible free-standing MoS2/carbon nanofibers composite cathode for rechargeable aluminum-ion batteries10.1021/acssuschemeng.8b05292 ↗