Effect of mold pressure on compaction and ion conductivity of all-solid-state batteries revealed by the discrete element method
Source abstract
Abstract
Abstract All-solid-state batteries (ASSBs) have enabled the development of compact and safer batteries with solid and non-flammable electrolytes. However, their practical applications are limited due to the difficulty associated with solid electrolytes (SEs) in forming a connected network for ionic transport and sufficient contact area on the active material (AM). Lithium-phosphate sulfides (LPS) are promising materials for SEs in ASSBs because they can plastically deform and form a close contact with AM. Herein, we develop and numerically implement a discrete element model for cold pressing that considers plastic deformation. Particle compaction proceeds in three steps, i.e., breakage of aggregates, particle rearrangement, and particle consolidation by plastic deformation. In addition, localized stresses easily deform the SE particles, thereby resulting in a force concentration between the AM particles. A higher mold pressure increases the relative density and contact area between the AM and SE. The relative density and ionic conductivity results agree well with the experimental results. We demonstrate a new correlation for ionic conductivity based on percolation theory from our observation of poor connectivity between SE aggregates. We believe that this research will help us understand the interactions during fabrication that can guide the development of future ASSBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Battery Technologies Research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Review—practical challenges hindering the development of solid state Li ion batteries10.1149/2.1571707jes ↗
2. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
3. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes10.1021/acs.chemrev.0c00101 ↗
4. Atomic-Scale influence of grain boundaries on Li-ion conduction in solid electrolytes for all-solid-state batteries10.1021/jacs.7b10593 ↗
5. Towards rational mechanical design of inorganic solid electrolytes for all-solid-state lithium ion batteries10.1016/j.ensm.2019.08.029 ↗
6. “Lithium‐Free” thin‐film battery with in situ plated Li anode10.1149/1.1393226 ↗
7. Compliant yet brittle mechanical behavior of Li2S–P2S5 lithium-ion-conducting solid electrolyte10.1002/aenm.201602011 ↗
8. Sulfide-based solid-state electrolytes: synthesis, stability, and potential for all-solid-state batteries10.1002/adma.201901131 ↗
9. Mechanical properties of sulfide glasses in all-solid-state batteries10.2109/jcersj2.18022 ↗
10. Evaluation of elastic modulus of Li2S-P2S5 glassy solid electrolyte by ultrasonic sound velocity measurement and compression test10.2109/jcersj2.121.946 ↗
11. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
12. Characterization of Li2S–P2S5 glass-ceramics as a solid electrolyte for lithium secondary batteries10.1016/j.ssi.2004.08.036 ↗
13. A lithium superionic conductor10.1038/nmat3066 ↗
14. Electrochemical performance of bulk-type all-solid-state batteries using small-sized Li7P3S11 solid electrolyte prepared by liquid phase as the ionic conductor in the composite cathode10.1016/j.electacta.2018.11.035 ↗
15. Preparation of sulfide solid electrolytes in the Li2S–P2S5 system by a liquid phase process10.1039/C7QI00737J ↗
16. Effect of microstructure on the ionic conductivity of an all solid-state battery electrode10.1149/2.0601902jes ↗
17. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
18. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
19. Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries10.1016/j.jpowsour.2016.12.098 ↗
20. Multiscale modeling of lithium-ion battery electrodes based on nano-scale X-ray computed tomography10.1016/j.jpowsour.2015.12.134 ↗
21. 4D analysis of the microstructural evolution of Si-based electrodes during lithiation: time-lapse X-ray imaging and digital volume correlation10.1016/j.jpowsour.2016.04.076 ↗
22. Operando visualization of morphological dynamics in all-solid-state batteries10.1002/aenm.201901547 ↗
23. Investigating electrode calendering and its impact on electrochemical performance by means of a new discrete element method model: towards a digital twin of Li-Ion battery manufacturing10.1016/j.jpowsour.2020.229320 ↗
24. Modeling the electrical conductive paths within all-solid-state battery electrodes10.1002/ceat.201900501 ↗
25. High active material loading in all-solid-state battery electrode via particle size optimization10.1002/aenm.201902881 ↗
26. Simulation of fabrication and degradation of all-solid-state batteries with ductile particles10.1149/1945-7111/abed23 ↗
27. Model development of a sponge carrier process using CFD-DEM with permeable particles10.2965/jwet.2012.193 ↗
28. Particle adhesion fundamentals and bulk powder consolidation10.14356/kona.2000022 ↗
29. Mechanical, electrical, and ionic behavior of lithium-ion battery electrodes via discrete element method simulations10.1002/ente.201900180 ↗
30. Numerical simulation of the behavior of lithium-ion battery electrodes during the calendaring process via the discrete element method10.1016/j.powtec.2019.03.020 ↗
31. A discrete particle packing model for the formation of a catalyst layer in polymer electrolyte fuel cells10.1016/j.ijhydene.2019.10.005 ↗
32. A particle based ionomer attachment model for a fuel cell catalyst layer10.1149/1945-7111/ab68d4 ↗
33. Modelling the effect of biofilm morphology on detachment10.2965/jwet.2015.49 ↗
34. A discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
35. New origin of a convective motion: elastically induced convection in granular materials10.1103/PhysRevLett.69.1367 ↗
36. In situ measurement of biaxial modulus of Si anode for Li-ion batteries10.1016/j.elecom.2010.09.008 ↗
37. Operando nanoindentation: a new platform to measure the mechanical properties of electrodes during electrochemical reactions10.1149/2.1411714jes ↗
38. TauFactor: an open-source application for calculating tortuosity factors from tomographic data10.1016/j.softx.2016.09.002 ↗
39. Computer “experiments” on classical fluids. I. Thermodynamical properties of Lennard-Jones molecules10.1103/PhysRev.159.98 ↗
40. Multidimensional binary search trees used for associative searching10.1145/361002.361007 ↗
41. Dry coating of active material particles with sulfide solid electrolytes for an all-solid-state lithium battery10.1016/j.jpowsour.2019.227579 ↗
42. Accelerated optimization methods for force-field parametrization in battery electrode manufacturing modeling10.1002/batt.202000049 ↗