Investigation and optimization of the ultra-thin metallic bipolar plate multi-stage forming for proton exchange membrane fuel cell
Source abstract
Abstract
Abstract Multi-stage forming of the ultra-thin metallic sheets is a promising process for manufacturing fine width and high aspect ratio bipolar plates in proton exchange membrane fuel cell. Correlations between the processing parameters and the channel quality evaluation indicators are investigated experimentally and numerically. A novel parameter optimization method and stage number design guidance are established with the consideration of the indicator priorities and material properties. The forming depth can be increased by larger Stage II punch stroke along with smaller clearance and radius. Increasing or decreasing the Stage II punch stroke and radius simultaneously contributes to larger draft angle. Small Stage II punch stroke and radius are beneficial to greater rib width. More uniform thickness distribution can be achieved by using smaller Stage II punch stroke and clearance. Two-stage forming is enough for soft materials and three-stage forming is suitable for relatively hard materials. Both the output power density and voltage distribution uniformity of the proton exchange membrane fuel cell are improved by employing multi-sage formed bipolar plates. The relationship between the parameters and indicators, optimization method, stage number design guidelines, all serve as the design principles of the micro channel's multi-stage forming for bipolar plates with ultra-thin metallic sheets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Automotive fuel cell stack and system efficiency and fuel consumption based on vehicle testing on a chassis dynamometer at minus 18 °C to positive 35 °C temperatures10.1016/j.ijhydene.2019.10.150 ↗
2. Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2014.08.113 ↗
3. Manufacturing methods for metallic bipolar plates for polymer electrolyte membrane fuel cell10.1080/10426914.2019.1605170 ↗
4. Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates10.1016/j.ijhydene.2015.03.064 ↗
5. Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells10.1016/j.energy.2018.09.136 ↗
6. James · 2016
7. Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments10.1016/j.enconman.2018.08.070 ↗
8. Development of novel proton exchange membrane fuel cells using stamped metallic bipolar plates10.1016/j.jpowsour.2015.02.145 ↗
9. Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2019.07.231 ↗
10. Stainless steel bipolar plates for proton exchange membrane fuel cells: materials, flow channel design and forming processes10.1016/j.jpowsour.2020.227783 ↗
11. Effect of channel geometry on formability of 304 stainless steel bipolar plates for fuel cells-simulation and experiments10.1115/1.4031538 ↗
12. Investigation of dimensional accuracy in forming of metallic bipolar plates with serpentine flow field10.1007/s00170-018-1650-5 ↗
13. Investigation of the effects of process sequence on the contact resistance characteristics of coated metallic bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2013.05.182 ↗
14. Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell10.1016/j.jpowsour.2007.12.037 ↗
15. Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus10.1016/j.jpowsour.2012.01.112 ↗
16. Feasibility study of a double-step hydroforming process for fabrication of fuel cell bipolar plates with slotted interdigitated serpentine flow field10.1007/s00170-015-7960-y ↗
17. Fabrication of metallic bipolar plates for proton exchange membrane fuel cell by flexible forming process-numerical simulations and experiments10.1115/1.3207870 ↗
18. Fabrication of aluminum 1050 micro-channel proton exchange membrane fuel cell bipolar plate using rubber-pad-forming process10.1007/s00170-012-4162-8 ↗
19. Manufacturing metallic bipolar plate fuel cells through rubber pad forming process10.1007/s00170-016-9297-6 ↗
20. Investigation of stamping process of metallic bipolar plates in PEM fuel cell—numerical simulation and experiments10.1016/j.ijhydene.2014.01.201 ↗
21. Thin metallic wave-like channel bipolar plates for proton exchange membrane fuel cells: deformation behavior, formability analysis and process design10.1016/j.jpowsour.2019.227217 ↗
22. Study of thickness distribution and dimensional accuracy of stamped metallic bipolar plates10.1016/j.ijhydene.2019.09.225 ↗
23. Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension10.1016/j.ijplas.2016.07.008 ↗
24. Influence of the electric pulse on springback during stretch U-bending of Ti6Al4V titanium alloy sheets10.1016/j.jmatprotec.2018.05.030 ↗
25. Study on multi-stage sheet metal forming for automobile structure-pieces10.1016/j.jmatprotec.2006.11.163 ↗
26. Prevention of shock lines in multi-stage sheet metal forming10.1016/S0890-6955(03)00108-1 ↗
27. Optimisation of the distribution of wall thickness in the multistage sheet metal forming of wheel disks10.1016/S0924-0136(02)00394-1 ↗
28. Numerical modeling of the multi-stage sheet pair hydroforming process10.1016/j.jmatprotec.2004.04.124 ↗
29. Fabrication of stainless steel bipolar plates for fuel cells using dynamic loads for the stamping process and performance evaluation of a single cell10.1016/j.ijhydene.2014.04.103 ↗
30. Numerical investigation of formed residual stresses and the thickness of stainless steel bipolar plate in PEMFC10.1016/j.ijhydene.2016.03.005 ↗
31. Improvement of formability for fabricating thin continuously corrugated structures in sheet metal forming process10.1007/s12206-012-0616-z ↗
32. Application of central composite design for optimization of two-stage forming process using ultra-thin ferritic stainless steel10.1007/s12540-015-4325-x ↗
33. Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: experiments and numerical simulations10.1016/j.ijhydene.2016.12.094 ↗
34. Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process
35. Numerical studies on the geometrical characterization of serpentine flow-field for efficient PEMFC10.1016/j.ijhydene.2010.10.073 ↗
36. Analysis of the flow distribution for thin stamped bipolar plates with tapered channel shape10.1016/j.ijhydene.2016.01.073 ↗
37. A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper10.1016/j.ijmecsci.2017.02.026 ↗
38. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates10.1016/j.enconman.2018.05.069 ↗
39. Analysis of micro/mesoscale sheet forming process with uniform size dependent material constitutive model10.1016/j.msea.2009.06.061 ↗
40. Development and characterization of multilayered Cr–C/a-C:Cr film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.11.063 ↗
41. The fabrication of high-aspect-ratio micro-flow channels on metallic bipolar plates using die-sinking micro-electrical discharge machining10.1016/j.jpowsour.2011.09.065 ↗
42. Contact behavior modelling and its size effect on proton exchange membrane fuel cell10.1016/j.jpowsour.2017.08.088 ↗
43. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells10.1016/j.jpowsour.2020.227836 ↗
44. Effect of channel-rib width on water transport behavior in gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.03.079 ↗