journal article·2020-02

An ion-conductive Li7La3Zr2O12-based composite membrane for dendrite-free lithium metal batteries

Wenqiang Zhang, Qiang Yi, Shuyuan Li, Chunwen Sun

Publisher page

Abstract

Abstract Lithium (Li) metal is pursued as the anode for next generation lithium batteries because of the highest energy density and the lowest reduction potential. However, the formation of lithium dendrite caused by nonuniform Li deposition exists. Moreover, the safety issue arising from hazardous Li dendrites hinders the practical application of lithium metal batteries (LMBs). In this work, an organic and inorganic composite protective membrane (CPM) consisting of PVDF-HFP and LLZO particles is prepared by a simple tape-casting method. The CPM modified Li symmetric cell exhibits no obvious voltage hysteresis over 500 h at 2 mA cm−2 and 1 mAh cm−2. Moreover, the CPM modified Li | LFP cell can stably run 800 cycles at 1C and retain a high average Coulombic efficiency of ~99.95%. Moreover, the in-situ formation of LiF between metallic Li anode and the C–F group in PVDF-HFP exhibits high modulus, effectively suppressing the growth of lithium dendrites. The uniform Li deposition is achieved owing to the high ionic conductivity and Li+ transference number of CPM. In addition, the high modulus LiF layer can stabilize interface and greatly reduce interfacial resistance after cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Moving to a solid-state configuration: a valid approach to making lithium-sulfur batteries viable for practical applications10.1002/adma.201002584 ↗
4. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
5. A comparative study of commercial lithium ion battery cycle life in electric vehicle: capacity loss estimation10.1016/j.jpowsour.2014.06.111 ↗
6. Recent advances in all-solid-state rechargeable lithium batteries10.1016/j.nanoen.2017.01.028 ↗
7. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
8. Design principles for electrolytes and interfaces for stable lithium-metal batteries10.1038/nenergy.2016.114 ↗
9. Achieving high energy density through increasing the output voltage: a highly reversible 5.3 V battery10.1016/j.chempr.2019.02.003 ↗
10. On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries10.1016/S0013-4686(99)00194-2 ↗
11. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
12. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
13. Reviving lithium-metal anodes for next-generation high-energy batteries10.1002/adma.201700007 ↗
14. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
15. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
16. Recent progress and perspective on lithium metal anode protection10.1016/j.ensm.2018.03.001 ↗
17. Designer interphases for the lithium-oxygen electrochemical cell10.1126/sciadv.1602809 ↗
18. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
19. Pre-modified Li3PS4 based interphase for lithium anode towards high-performance Li-S battery10.1016/j.ensm.2017.09.007 ↗
20. Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
21. Free-standing copper nanowire network current collector for improving lithium anode performance10.1021/acs.nanolett.6b01581 ↗
22. High performance lithium metal anode: progress and prospects10.1016/j.ensm.2017.01.006 ↗
23. Beyond lithium ion batteries: higher energy density battery systems based on lithium metal anodes10.1016/j.ensm.2017.12.002 ↗
24. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
25. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
26. Nanoscale nucleation and growth of electrodeposited lithium metal10.1021/acs.nanolett.6b04755 ↗
27. An ion-conductive Li1.5Al0.5Ge1.5(PO4)3 -based composite protective layer for lithium metal anode in lithium-sulfur batteries10.1016/j.jpowsour.2017.11.063 ↗
28. A high energy lithium-sulfur battery with ultrahigh-loading lithium polysulfide cathode and its failure mechanism10.1002/aenm.201502459 ↗
29. Towards stable lithium-sulfur batteries: mechanistic insights into electrolyte decomposition on lithium metal anode10.1016/j.ensm.2017.01.003 ↗
30. The gap between long lifespan Li-S coin and pouch cells: the importance of lithium metal anode protection10.1016/j.ensm.2016.09.003 ↗
31. Perspectives for restraining harsh lithium dendrite growth: towards robust lithium metal anodes10.1016/j.ensm.2018.03.024 ↗
32. Lithium fluoride additives for stable cycling of lithium batteries at high current densities10.1002/aelm.201500246 ↗
33. One-pot solution coating of high quality LiF layer to stabilize Li metal anode10.1016/j.ensm.2018.04.024 ↗
34. Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode10.1016/j.ensm.2018.06.022 ↗
35. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries
36. Liquid electrolyte lithium/sulfur battery: fundamental chemistry, problems, and solutions10.1016/j.jpowsour.2012.12.102 ↗
37. Implantable solid electrolyte interphase in lithium-metal batteries10.1016/j.chempr.2017.01.003 ↗
38. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism10.1021/ja312241y ↗
39. Effects of cesium cations in lithium deposition via self-healing electrostatic shield mechanism10.1021/jp4127754 ↗
40. Dendrite-free lithium deposition with self-aligned nanorod structure10.1021/nl5039117 ↗
41. Artificial soft-rigid protective layer for dendrite-free lithium metal anode
42. A novel ZnO-based inorganic/organic bilayer with low resistance for Li metal protection10.1016/j.ensm.2018.06.017 ↗
43. An ion redistributor for dendrite-free lithium metal anodes10.1126/sciadv.aat3446 ↗
44. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
45. Lithiophilic Cu–Ni core–shell nanowire network as a stable host for improving lithium anode performance10.1016/j.ensm.2017.06.004 ↗
46. A durable and safe solid-state lithium battery with a hybrid electrolyte membrane10.1016/j.nanoen.2018.01.028 ↗
47. Enhanced ionic conductivity and electrochemical capacity of lithium ion battery based on PVDF-HFP/HDPE membrane10.1016/j.matlet.2016.02.010 ↗
48. Composite gel polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) with modified Aluminum-doped Lithium Lanthanum Titanate (A-LLTO) for high-performance lithium rechargeable batteries10.1021/acsami.6b05301 ↗
49. Polymer gel electrolytes for lithium batteries10.1070/RC2012v081n04ABEH004210 ↗
50. From Vinylidene Fluoride (VDF) to the applications of VDF-containing polymers and copolymers: recent developments and future trends10.1021/cr800187m ↗
51. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly(vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
52. In situ generated fireproof gel polymer electrolyte with Li6.4Ga0.2La3Zr2O12 as initiator and ion‐conductive filler10.1002/aenm.201900611 ↗
53. Ion transport in separator membranes of lithium secondary batteries10.1021/acs.jpcc.5b00085 ↗
54. Investigation of polysulfone film on high-performance anode with stabilized electrolyte/electrode interface for lithium batterie10.1016/j.jechem.2019.06.008 ↗
55. High polarity poly(vinylidene difluoride) thin coating for dendrite-free and high-performance lithium metal anodes