New mixed ionic and electronic conductors based on LaScO3: Protonic ceramic fuel cells electrodes
Source abstract
Abstract
Abstract In the present work, the well-known proton conducting oxide La0.9Sr0.1ScO3-δ (LSS) is modified by the introduction of transition metal cations into a Sc sublattice in order to enhance the electronic conductivity of the material. Introduced cations of transition metal are selected on the basis of their ion radii and the variety of oxidation state, thus the compositions under study are La0.9Sr0.1Sc1-xMexO3–α (LSSMe) (where Me is Ti, Fe, Co, Ni, or Mo). Introduction of more than 5 mol.% of a dopant leads to a change in conductivity behaviour on pO2 which means that the predominant disorder type shifts from ionic to electronic. Electrochemical performance is studied on both symmetric and fuel cells. Impedance spectra are analysed by means of the distribution of relaxation time (DRT) technique. Both cathodes and anodes have shown great electrochemical performance with polarization resistance at 800 °C as low as 0.005 Ohm*cm2 for the cathode and 0.039 Ohm*cm2 for the anode in wet (water vapour pressure (pH2O) = 2.5*10−2 atm) air and hydrogen respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Mathematical modelling of proton‐conducting solid oxide fuel cells and comparison with oxygen‐ion‐conducting counterpart10.1002/fuce.200600049 ↗
2. Prospect of hydrogen technology using proton-conducting ceramics10.1016/j.ssi.2003.03.001 ↗
3. Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production10.1016/0167-2738(81)90113-2 ↗
4. Materials development, properties and application10.1016/j.pmatsci.2013.08.001 ↗
5. Electrochemical performance of protonic ceramic fuel cells with stable BaZrO3-based electrolyte: a mini-review10.1016/j.elecom.2018.09.001 ↗
6. On the development of proton conducting materials for technological applications10.1016/S0167-2738(97)00082-9 ↗
7. Shirpour · J. Mater. Phys. Chem. Chem. Phys. · 2012 · 14 · 73010.1039/C1CP22487E ↗
8. Materials challenges toward proton-conducting oxide fuel cells: a critical review10.1039/b902343g ↗
9. Synthesis and characterization of dense proton-conducting La1-xSrxScO3-Α ceramics10.1016/j.ijhydene.2018.11.041 ↗
10. Conductivity of A- and B-site doped LaAlO3, LaGaO3, LaScO3 and LaInO3 perovskites10.1016/S0167-2738(99)00337-9 ↗
11. Proton and oxide ion conductivity of doped LaScO310.1016/S0167-2738(99)00194-0 ↗
12. High temperature crystallographic study of (La0.9Sr0.1)MIIIO3-δ (MIII=Sc, In, and Lu) perovskite proton conductor10.1016/S0167-2738(03)00256-X ↗
13. Chemical solution deposition and characterization of the La1-хSrxScO3-α thin films on La1-xSrxMnO3-α substrate10.1016/j.ijhydene.2018.08.114 ↗
14. Phase composition and conductivity of La1–xSrxScO3–α (x = 0.01–0.20) under oxidative conditions10.1134/S1023193512050114 ↗
15. Nature of conductivity of Perovskites La1−xSrxScO3−α (x = 0.01–0.15) under oxidative and reducing conditions10.1134/S1023193512110158 ↗
16. Composite electrode materials for solid oxide fuel cells with the protonic electrolyte of La1–xSrxScO3–δ10.1134/S1023193517070072 ↗
17. Novel Ni cermets for anode-supported proton ceramic fuel cells10.1007/s10008-019-04233-5 ↗
18. Layer-structured LiNi0.8Co0.2O2: a new triple (H+/O2−/e−) conducting cathode for low temperature proton conducting solid oxide fuel cells10.1016/j.jpowsour.2015.12.015 ↗
19. In situ formation of a 3D core-shell and triple-conducting oxygen reduction reaction electrode for proton-conducting SOFCs10.1016/j.jpowsour.2018.03.029 ↗
20. Synthesis of La1 − xSrxSc1 − yFeyO3 − δ (LSSF) and measurement of water content in LSSF, LSCF and LSC hydrated in wet artificial air at 300 °C10.1016/j.ssi.2010.09.009 ↗
21. Conductivity of perovskites La0.9Sr0.1Sc1–x Fe x O3–α (x = 0.003–0.47) in oxidizing and reducing atmospheres10.1134/S1063783416080278 ↗
22. Promising cathode material for protonic ceramic fuel cells based on a BaCe0.2Zr0.7Y0.1O3−δ electrolyte10.1016/j.jpowsour.2012.06.098 ↗
23. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
24. On the application of the tolerance factor to inorganic and hybrid halide perovskites: a revised system10.1039/C5SC04845A ↗
25. Synthesis and characterization of dense proton-conducting La1-xSrxScO3-α ceramics10.1016/j.ijhydene.2018.11.041 ↗
26. Defect structure analysis of B-site doped perovskite-type proton conducting oxide BaCeO3: Part 2: the electrical conductivity and diffusion coefficient of BaCe0.9Y0.1O3−δ10.1016/j.ssi.2008.08.005 ↗
27. Investigation of the protonic conduction in Sm doped BaCeO310.1016/j.jpowsour.2008.01.036 ↗
28. Density-functional description of the electronic structure of LaMO3 (M=Sc,Ti,V,Cr,Mn,Fe,Co,Ni)10.1103/PhysRevB.51.16575 ↗
29. Atomic-scale insight into LaFeO3 Perovskite: defect nanoclusters and ion migration10.1021/jp710463x ↗
30. The effects of dopants on the properties of metal oxides10.1016/S0167-2738(99)00312-4 ↗
31. Relation between defects and catalytic activity of calcium doped LaFeO3 perovskite10.1016/j.ssi.2011.02.014 ↗
32. Hydration and transport properties of the Pr2-xSrxNiO4+d compounds as H+-SOFC cathodes10.1039/c2jm31812a ↗
33. The impact of porosity, pH2 and pH2O on the polarisation resistance of Ni-BaZr0.85Y0.15O3-d cermet anodes for Protonic Ceramic Fuel Cells (PCFCs)10.1016/j.ijhydene.2014.10.093 ↗
34. The electrochemical behavior of the promising Sr2Fe1.5Mo0.5O6-d + Ce0.8Sm0.2O1.9-d anode for the intermediate temperature solid oxide fuel cells10.1016/j.jallcom.2017.03.057 ↗
35. A high-performance ceramic composite anode for protonic ceramic fuel cells based on lanthanum strontium vanadate10.1016/j.ijhydene.2014.03.219 ↗
36. Study of the electrode polarization resistance of cobaltites with high Ba content as cathode for IT-SOFC10.1149/2.0681707jes ↗
37. BaCo0.4Fe0.4Zr0.2O3-δ: evaluation as a cathode for ceria-based electrolyte IT-SOFCs10.1016/j.jallcom.2018.08.232 ↗
38. Stroeva polarization resistance of platinum electrodes in contact with proton conducting La0.9Sr0.1ScO3–δ10.1134/S1023193514070027 ↗
39. Development of electrochemically active electrodes for BaCe0.89Gd0.1Cu0.01O3−δ proton conducting electrolyte10.1016/j.ssi.2017.02.001 ↗
40. Electrochemical analysis for anode-supported microtubular solid oxide fuel cells in partial reducing and oxidizing conditions10.1016/j.ssi.2014.01.012 ↗
41. Investigations on electrochemical performance of a proton-conducting ceramic-electrolyte fuel cell with La0.8Sr0.2MnO3 cathode10.1149/2.0551506jes ↗
42. Electrochemical characterization of La0.6Ca0.4Fe0.8Ni0.2O3−δ perovskite cathode for IT-SOFC10.1016/j.jpowsour.2013.03.121 ↗
43. The mechanism of porous Sm0.5Sr0.5CoO3 cathodes used in solid oxide fuel cells10.1149/1.1378290 ↗